Seal assembly - Import export

Turned parts with mechanical finishing. Ground, hardened, welded, soldered. Pre-assembled with sealing elements and O-rings.

Sealant and lubricant for cold and hot-water valves in plumbing and heating sector, in vehicle heating systems or cooling circuits, ground seals on glass taps and desiccators For lubricating O-rings and rubber seals during assembly and operation, as well as plastic parts of all kinds Advantages and benefits Highly effective due to excellent adhesion on all materials Neutral behaviour with regard to plastics and elastomers Consistent properties without drying out, hardening or bleeding Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol

Sealant and lubricant for cold and hot-water valves in vehicle heating systems or cooling circuits and for ground seals on glass taps and desiccators Lubrication of O-rings and rubber seals for assembly and during operation Lubrication of plastic parts Advantages and benefits NSF H1 registered Tasteless and odourless Highly effective due to excellent adhesion on all materials Neutral behaviour with regard to plastics and elastomers Completely EPDM-compatible High long-term stability without drying out, hardening or bleeding Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol MOSH/MOAH-free

For the lubrication of machine parts under high mechanical loads Silicone-free alternative for the lubrication of O-rings and sealings during assembly For the lubrication of plastic/plastic and plastic/metal combinations, e.g. beverage can holders in the automotive industry Advantages and benefits High shear stability Excellent adhesion on plastics and metals Compatible with plastics (see table OKS 468) Constant properties without drying, hardening or bleeding NSF H1 registered Silicone-free MOSH/MOAH-free

For the lubrication of plastic/plastic and plastic/metal combinations, e.g. single-serving taps in the food industry or for beverage can holders in the automotive industry Silicone-free alternative for the lubrication of O-rings and sealings during assembly Advantages and benefits Good compatibility to plastics Constant properties without drying, hardening or bleeding Tested for beer foam compatibility NSF H1 registered MOSH/MOAH-free Silicone-free

Silicone-free alternative for the lubrication of O-rings and sealings during assembly. Lubrication of plastic parts such as gears, sliding surfaces, etc. Advantages and benefits Excellent adhesion on plastics and metals Tasteless and odourless Consistent properties without drying out, hardening or bleeding NSF H1 registered Compatible with plastics (see table) MOSH/MOAH-free Silicone-free

Franke bearing assemblies type LVE are bearing assemblies with toothed belt gearing, aluminium housing rings and integrated bearing elements. Franke bearing assemblies type LVE are suitable for medium rotational speeds and accuracies. They convince by their low weight and are available at short notice, in some cases even from stock. Designed as 4-point bearings, they can support equally high loads from all directions and are insensitive to shocks and vibrations. The bearing assemblies are sealed on both sides and adjusted to preload.

Franke bearing asseblies type LVB are redy-to-install bearing assemblies with housing rings made of aluminium and integrated bearing elements. Franke LVB are suitable for medium rotational speeds and accuracies and convince by their light weight. LVB bearing assemblies are available at short notice, some of them even from stock. Designed as 4-point bearings, they can support equally high loads from all directions and are insensitive to shocks and vibrations. LVB sbearing assemblies are sealed on both sides and are set with preload.

Franke Bearing Assemblies Type LVA are ready-to-install bearing assemblies with steel housing rings and integrated bearing element. They are suitable for medium rotational speeds and accuracies. They are available at short notice, some of them even from stock. Designed as 4 point bearings, they can support equally high loads from all directions and are insensitive to shocks and vibrations. Type LVA bearing assemblies are sealed on both sides and adjusted with preload.

High-performing frits for the most challenging chromatography applications POREX offers a variety of PE, PP and porous PTFE filters — commonly known as frits, for use in commercially available SPE columns, cartridges or multi-well SPE plates to facilitate column concentration to a vacuum manifold, needle or collection vessel. Hydrophilic, oleophobic, blended-resin, and functionalized materials are also available for use in the most challenging chromatography applications. Porex frits and filters offer: Controlled flow for optimized reaction time (kinetic control). Superior resin support due to narrow pore size distribution. Cleanliness and high purity with very low levels of extractables, leachables, and particle shedding. Custom designs in various disc, spherical, and other geometries to help ensure a tight material seal, optimized assembly operation, and no resin by pass. Fast & easy assembly in mass production - rigid structure facilitates manufacturing...

Areas of application: G-Sealed can be used in many applications, but is particularly suitable for the automotive industry due to its excellent thermal and chemical resistance. Customer benefits: • Non-reactive and non-hardening coating. • Immediate (sealing) immediately after assembly of the connector • A dry, elastic and non-slip coating • Good thermal and chemical resistance • Applicable for metallic and non-metallic materials • Does not require labeling and is therefore not hazardous or harmful to the environment

Whenever pre-assembled cables need to be led into a housing, the cable entry system KADL is the perfect solution. KADL is installed with one click - easy and timesaving. The modular structure allows a step-by-step installation of 3 to 25 cables. With 16 different grommets a wide clamping range from 3 to 32,5 mm can be covered. - For applications where you need to insert and seal pre-assembled cables with connectors into housings - Tool-free entry and connecting technology for machines and equipment - Temperature range -30 °C to +100 °C - Protection grade IP65 - UL 514B - 12 different frame combinations with 16 sizes of grommets (accessory) - Click-in assembly at wall thickness from 1,5 - 2,0mm - For walls with thickness larger 2,0 mm the KADL can be fixed with standard screws

The aluminum enclosure Type CA from Bernstein is corrosion resistant, impact resistant and has a high mechanical strength due to which it is ideal for the encapsulation of electrical, electronic, pneumatic components and applications that are used in potentially explosive environments. The CA enclosures feature copper-plated earthing screws for connecting PE conductors on body and cover, and are finished in RAL 7001 in a silver/gray shade. Earthing sockets and mounting flanges can be utilized for mounting as well as for securing the built-in components. These come with factory-assembled seals that confer class IP 65 (optionally IP 67) protection according to DIN EN 60529.

Our gasketed plate heat exchangers combine passion, scientific curiosity and technological expertise. The facts: High efficiency at low operating costs, versatile application possibilities with lower investment costs and maximum flexibility. Our efforts to continuously develop the gasketed plate heat exchanger-series further are aimed at meeting your thermodynamic and hydraulic performance needs and to ensure maximum economic efficiency. Our wide range of plate corrugations, connection sizes, materials, plate lengths and widths enable an ideal configuration according to your exact requirements. Additionally, our gasketed plate heat exchangers come with a maintenance-friendly assembly and sealing technology, ensuring low service and maintenance costs.

HT/S Advantage™ / PolarExtreme Reman Fan Drives & HT Now there's a superior alternative to upgrading an HT/S Advantage or S Fan Drive that endures the harshest environments: PolarExtreme Repair Kits. PolarExtreme Repair Kits feature seal components constructed from hydrogenated buna nitrile rubber (HBNR) to enhance the Horton fan drive for extreme conditions. The PolarExtreme super Kit includes the new PFD (Piston Friction Disc) with a unique fin design for better heat dissipation. These kits mean PolarExtreme delivers the ultimate upgrade with: - Longer life - Better abrasion resistance - 30% greater tolerance to temperature extremes - Less likely to suffer spiral fatigue - Less breakage and leakage Horton blue seals identify these kits as the extreme performer — PolarExtreme. PolarExtreme Seal Kit Repairs and upgrades Horton HT/S Advantage and S Air-Engaged Fan Drives Blue D- & O-ring, cartridge assembly, face seal assembly, System Sentry®, umbrella check valve, spline lubricant, spline lubricant brush, socket head screws. PolarExtreme Super Kit Repairs and upgrades Horton HT/S Advantage Air-Engaged Fan Drives PolarExtreme PFD (Piston Friction Disc) with a unique fin design for better heat dissipation, hub assembly, sheave bearings, friction facing, lock nut, blue PolarExtreme D- & O-ring, cartridge assembly, face seal assembly, System Sentry, umbrella check valve, spline lubricant, spline lubricant brush, socket head screws. Related Products - HT/S Advantage Air-Engaged Fan Drives - Advantage Reman Fan Drives & Genuine Horton Repair Kits Links - Order or View Literature - On-line Catalog

— Plug connectors series 15 — With shut-off — Can be assembled as bulkhead — Sealing FPM — Material Al natural anodized, brass nickel-plated — Temperature range -20 to +120 °C — Working pressure range -0,8 to 16 bar

More and more companies therefore want to buy an assembly-ready or ready-to-ship assembly. Whether final assembly, packaging, sealing or insulation - we see ourselves as a service provider, even beyond our core competencies. Assembly assembly Assembly of provided components Procurement and processing of assembly parts Procurement and assembly of aggregates insulation seal final check You will receive a ready-to-install or ready-to-ship module!

The featured Singlemode (SM 9/125) metal coated fiber operates in both, 1310 nm and 1550 nm wavelength ranges, according to G.652 A/B standards. The fiber is supplied with either 24 kt Gold or Aluminum coatings. As an electric conductor, these types of coatings provide the user with the ability to terminate the fiber directly to the coating, supporting hermetically sealed assemblies. Gold and Aluminum coated fibers are most capable of withstanding high temperatures and harsh environments compared to conventional coated fibers. The fibers have low stress corrosion susceptibility and offer superior mechanical protection in the most challenging harsh environments. All metal coated Singlemode fibers are 100 % quality tested to Heracle‘s stringent test procedures in accordance TIA/EIA and international Fiber Optic Test Procedures (FOTP). Custom specific tests to verify application requirements are available.

heracle offers germanium doped fused silica graded index multimode fibers needed for data communication at the optical wavelengths 850 nm and/or 1300 nm. The metalized optical fiber is supplied with either 24 kt Gold or Aluminum coatings. As an electric conductor, these types of coatings provide the user with the ability to terminate the fiber directly onto the coating, supporting hermetically sealed assemblies. Gold and Aluminum coated fibers are capable of withstanding extreme temperatures and harsh environments. The manufacturing process utilized in the production of these fibers result in low stress corrosion susceptibility, and thus offering improved mechanical protection to the optical fiber when used in the most challenging harsh environments. All metal coated graded index fibers are 100 % quality tested to Heracle‘s stringent test procedures in accordance with the Telecommunications Industry Association (TIA/EIA) and international Fiber Optic Test Procedures (FOTP).

Our gold coated fiber is available for both wavelength ranges: from UV, VIS up to infrared wavelength ranges. The fiber offers excellent protection against chemical corrosion & mechanical stres and is capable of withstanding extreme temperatures and harsh environments. The fiber can be terminated directly onto the coating for hermetically sealed assembly. Our Gold coated fiber has very low outgassing of volatile components. We perform 100% stringend test procedures according to international standards. Typical applications are typically for extreme conditions such as: • Aircraft, missile, rocket, turbine & jet engine monitoring • Radiation, caustic & corrosive environments • Material fatigue sensing applications • High power laser delivery systems • Ultra high vacuum applications

Using the materials mentioned, HEUTE+COMP. manufactures sealing elements and O-ring supports according to your specifications. PTFE support rings prevent high pressures from extruding O-rings into sealing gaps and damaging the rings as a result. Due to its cold flow characteristics and high degree of abrasion, pure PTFE is only conditionally suitable for sealing. Accordingly, a wide range of PTFE compounds have been developed to account for all involved parameters. Temperature Media influence Pressures Sealing gaps Assembly conditions Additionally for dynamic applications: Material and surface of the sliding counterpart Speed The technique used to process a material also influences its properties. For instance, a material filled with glass can be made gas-tight through special heat treatment. For this reason, our team offers consultancy early on during the development phase in order to select appropriate materials for your application.