Safety - Import export

Kuhnkes FIO Safety SDI16/SDO2 is a safety I/O terminal featuring 16 safe digital input channels and four safe digital output channels. This expansion module from Kuhnke's FIO range easily integrates in any EtherCAT® network. 16 inputs pick up sensor readings via floating 24 VDC contacts while four outputs send up to 0.5 A of current per channel to 24 VDC actuators. In case the EtherCAT terminal detects a fault it changes to a safe state (fail safe). The module meets the requirements of IEC 61508 SIL3 and DIN EN ISO 13849 PL e. ; Safety over EtherCAT (FSoE); 16 safe inputs 24 VDC; 4 safe outputs 0.5 A; IEC 61508 SIL3 and DIN EN ISO 13849 PL e

At work, and depending on the nature of the tasks to be performed, operators are required to wear protective equipment. This equipment must be the answer to a specific need. Only the reality of the field determines which PPE is appropriate for a given situation. A precise analysis of the work area and the risks it may present makes it easier to choose suitable equipment. Many professions require the use of protective equipment, including glasses. Particles, projections, or dust are all potentially dangerous risks for the eyes and the face. However, not all models can protect you effectively. Here is the Ronix RH-9027 safety glasses to save you time. This safety equipment features GB14866e standard lenses for optimal UV protection. It also features 90-rated polycarbonate lenses that can absorb 99% of UVA, UVB, and UVC rays between 290 nm and 400 nm.

There are different types of safety instruments, which protects the health of the workers against damages that might happen. Ronix provides three safety helmets to the customers, RH-9090, RH-9091, and RH-9092. RH-9092 is made of ABS, while RH-9090 and RH-9091 are made of PE materials. These Ronix-made helmets are made of strong, yet ultra-light that covers longer terms of use for the workers. The replaceable soft brow pad, suspensions and headbands are also provided with these three safety helmets. Ronix-manufactured safety helmets are low-profile design and low center of gravity offer excellent balance to the user. The innovative suspension bends make it possible to be flexible and fit better to any size. And finally, all of these three helmets meet ANSI Z89.1-2009 standards, type 1, class C, G and E.

There are different types of safety instruments, which protects the health of the workers against damages that might happen. Ronix provides three safety helmets to the customers, RH-9090, RH-9091, and RH-9092. RH-9092 is made of ABS, while RH-9090 and RH-9091 are made of PE materials. These Ronix-made helmets are made of strong, yet ultra-light that covers longer terms of use for the workers. The replaceable soft brow pad, suspensions and headbands are also provided with these three safety helmets. Ronix-manufactured safety helmets are low-profile design and low center of gravity offer excellent balance to the user. The innovative suspension bends make it possible to be flexible and fit better to any size. And finally, all of these three helmets meet ANSI Z89.1-2009 standards, type 1, class C, G and E.

There are different types of safety instruments, which protects the health of the workers against damages that might happen. Ronix provides three safety helmets to the customers, RH-9090, RH-9091, and RH-9092. RH-9092 is made of ABS, while RH-9090 and RH-9091 are made of PE materials. These Ronix-made helmets are made of strong, yet ultra-light that covers longer terms of use for the workers. The replaceable soft brow pad, suspensions and headbands are also provided with these three safety helmets. Ronix-manufactured safety helmets are low-profile design and low center of gravity offer excellent balance to the user. The innovative suspension bends make it possible to be flexible and fit better to any size. And finally, all of these three helmets meet ANSI Z89.1-2009 standards, type 1, class C, G and E.

A qualified Electrical Engineering Specialist has a profound education as well as specialized knowledge and qualifications in the field of electrical engineering. He ensures that electrical systems and equipment are properly installed, maintained, and operated. He is also the point of contact for all safety-relevant standards and regulations in electrotechnical matters. ErTeMes will be happy to support you and take on tasks of the qualified Electrical Engineering Specialist in your company, e.g.: Testing and (re)establishing the proper and standard-compliant condition of your electrical machines, systems, and equipment; Troubleshooting when things get stuck; Documentation according to current standards; Training and instruction of your employees; Coordination of work processes.

safety pilot, thermocouple, air regulation, needle valve, pilot flame, DIN 30665

It is very important to use safety gloves while working. Over 60% of workplace accidents are related to the non-use of safety equipment. There are many types of safety gloves, each produced and supplied for a specific activity. The hand is one of the most important parts of the body, which can withstand the dangers of electrical shocks, contact with chemicals, tears and cuts, scratches, burns, punctures, contact with biological materials, as well as very high temperatures. Appropriate safety gloves must be used for protection and care. It is necessary to use safety gloves to prevent injuries to fingers. The Ronix RH-9010 Nitrile Safety Glove is one of these types of gloves. A special nitrile coating is used for the palm and finger parts of the gloves which makes your grip easy and at the same time maintains all tactile senses. This glove is abrasion resistance, durable, highly elastic, and allergen-free.

Safety glasses are essential safety equipment at the job site. The hazards of working with flying wood chips and sparks while cutting wood or metal are undeniable. Therefore, RH-9020 Safety Glasses are needed for every workshop and every application. This product is made of polycarbonate with a scratch-resistant polyester coating. You can also change the handles in 4 different positions for more comfortable use.

Whether on the conveyor belt or on the machine – when maximum safety is required, BERNSTEIN rope pull switches provide a proven and reliable technical solution.The switches can be deployed flexibly, are easy to install and convenient to handle.And most importantly: they offer maximum safety when it is needed. The SR series of safety rope pull switching devices are designed and approved in accordance with the standards IEC 947-5-5, DIN EN 60947-5-5 and ISO 13850. On actuation or in the event of cable breakage, the emergency stop switching device locks automatically and can only be reset to its initial setting by using the resetting device on the switch. • Protection class IP67 • Stable and durable plastic housing (PA 6 GV) • Can be deployed at temperatures between –25 °C and +70 °C • Flexible handling with three M20 x 1.5 cable entries • Easy installation due to the maximum connection space • Up to four positively driven NC contacts

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

Everywhere, where digital signals must be electrically separated and processed or current and voltage limited power supply is needed, our interface devices are used such as isolating switching amplifiers, solenoid drivers, relay couplers and rotation speed monitors. The interface devices are available in the IP20 modular housing for DIN rail as well as in the compact IP67 housing for decentralized remote-site use. The product portfolio also comprises solutions for the Ex area and SIL-certified devices.

Securing vertically moving masses Safety for oblique and vertical axes Typical applications include oblique-angled and vertical axes in the automation industry to provide vital protection of personnel and machinery. Series KSP For small to medium-sized loads DGUV-approved One load direction

For safety-related applications, we offer IP67 block I/O modules with safe digital inputs and universal digital channels that can be used as inputs or outputs. The modules also feature non-safe universal digital channels and IO-Link master ports. This allows connection of standard I/Os and IO-Link devices to an IP67 fieldbus module - in addition to the safety inputs and outputs. Via the IO-Link IO hubs, up to 32 more universal digital signals can be connected.

In the field of safety sensors, we offer safety light screens in various lengths and types with up to 14 mm resolution and muting function. We offer laser scanners with large protective fields for special tasks. Two-hand buttons and controls round off the range. For direct connection to the machine, we also offer versatile controls in addition to simple safety relays.

KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Mechanical Safety Catcher The Mechanical Safety Catcher KRM is operated purely mechanically and requires neither a hydraulic nor a pneumatic system for control. The clamping head is kept open mechanically and acts upon rupture of the suspension (rope, belt, chain, etc.). The energy of the falling mass is then used to generate the clamping force. In applications where lifted loads can be dangerous in case of rupture of the suspension device, Safety Catchers KRM are used to protect people and assure accident prevention. Safety Catchers KRM secure the load at any point of the stroke in a mechanically safe and absolutely reliable way. Due to the principle of self-reinforcing clamping, a very high level of safety is reached. Application example Packing...

Secure restraining of lifted loads Compact and safe The design principle allows for the creation of highly compact clamping heads. They are ideal for applications involving purely static securing. Series KRG, KRGP For static or slow-moving masses Compact design One load direction

Safety Step ladder - Working height: 2.65 m-3.75 m

The safety ladder is the ideal solution for professionals who need a reliable and safe ladder for demanding work up to a height of 8 metres. This extendable ladder is equipped with an anchor point on the last rung, which allows the user to attach themselves to a safety line. In addition, the safety ladder has side supports with extendable legs that additionally secure the ladder against falling over sideways. The yellow, highly visible ladder is insulated up to 100 kV, anti-magnetic and resistant to moisture, acids, corrosion and UV rays.

In December 2009 the new Machine Directive 2006/42/EC of the European Parliaments went into effect, and with it a number of new legal ordinances with which, among other things, the so-called "Functional Safety" of devices and systems is to be ensured. The goal is to limit the risk of endangerment of human beings, the environment, and investment goods. This is to be demonstrably achieved with systematic error avoidance, error detection, and in particular error control. All devices and systems, which can result in the death or injury of human beings, in catastrophic damage to the environment or in destruction, for example of production systems, in the case of an error must be classified as "safety-relevant". The applicable safety standards must then be applied during their design, development, manufacture and operation. Today we find safety-relevant systems in many industries supplied by Novotechnik's sophisticated, innovative products. In the industrial sector this is the case,...

Due to the ever increasing automation of manufacturing processes and equipment, the protection of people from sources of danger is growing in importance. The BLOCAN safety guard has a grid design and therefore reduces the effort required from the user in planning, construction and assembly to a minimum. The RK protection system complies with the new Machinery Directive 2006/42/EC. Using special Click & Safe connection elements, the safety guard elements are fixed quickly and securely to pillars made from BLOCAN® aluminium profiles which fulfil the legal requirements for safety devices. Stable protection system with aluminium design Minimal effort required in construction due to standard grid Short assembly times with no mechanical work Clamping profiles allow a wide variety of panel elements to be installed Smooth, easy-clean outer surfaces, attractive design Comprehensive range of accessories Complies with the new EU Machinery Directive 2006/42/EC

• Face shield to protect against class 1 arcing faults (4 kA / 135 kJ/m²) • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The electrician´s face shield is made entirely of plastic • The flexible plastic profile fits on many helmets • The visor is manufactured from 1,5mm-thick Polycarbonate • It has excellent optical qualities, and its light transmittance VLT (D65) according to ISO 10527:2007 i ≥75% • The visor can be folded up and can be locked in place in any position by means of a screw connection • The electrician´s face shield is attached in a non-slip manner by means of a wide, adjustable elastic band

for gas burners meeting DIN 30665*spiraling stainless steel wire core (buckling resistance)*working pressure up to 100 mbar

DIN Norm 30664,1*outside Ø 14 mm*inside Ø 10 mm

220 g / 400 ml, capacity 3 h, 70 % butane, 30 % propane

for cartridge with safety valve, see Usbeck article 1430

safety pilot, thermocouple, air regulation, stop-cock, pilot flame

safety pilot, thermocouple, G 1/4 screwed left-hand, air regulation, needle valve, pilot flame, DIN 30665

Suction Cup for additional stability for Usbeck Burners