Rope wires - Import export

secutex protection also for wire ropes secutex protective sleeves in combination with Spanset lifting slings are always the best choice for lifting machinery elements and other loads. Because of the design, the lifting slings are wide, the load is distributed over a relatively large area. But sometimes secutex protective sleeves are also required for wire ropes. The wire ropes have an almost round diameter, the surface area to the load is rather small and the stress per area is high. In general, the use of wire rope sleeves can only be recommended for the lifting of large, round loads, i.e. without sharp or angular edges. There are slotted and also unslotted secutex wire rope protective sleeves available for one or two strands. The slotted variants can easily be assembled afterwards, the closed types, on the other hand, have to be installed during the manufacture of the wire ropes. Please note that the wire ropes often have a larger diameter than the nominal size

round wires for crane ropes, lift ropes, lifting systems, mining ropes, forestry applications, architectural ropes, ropes for automotive and aviation, special ropes for offshore technology, profile wires for special applications, fully locked / semi-locked ropes for tensioning systems, mountain railways, transport systems, profile wires for reinforcements in the offshore sector.

• For cutting wire ropes and steel wire without any burr or splaying • For wire ropes 1570 N/mm² • Cutting edges inductively hardened • With optimum leverage for easy and effortless work • Handles made of precision steel tube • Insulation according to DIN EN/IEC 60900

Wire rope clips formerly acc. to DIN 1142 Have attention to the note in the download area. * The nominal size corresponds to the maximum rope diameter. ** The minimum quantity refers to the required number (acc. to DIN) of wire rope clips. *** similar to DIN

Wire rope clips similar to DIN 741 for minor purposes * The nominal size corresponds to the maximum rope diameter. ** The minimum quantity refers to the required number (acc. to DIN) of wire rope clips.

Wire rope clips with shortened bracked to safe the dead end of ropes at asymetric wedge sockets * The nominal size corresponds to the maximum rope diameter.

Simplex-, Duplex-clamps, wire rope clips, various turnbuckles, thimbles made from stainless steel

Wire rope clip similar DIN 741 Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium

Wire rope clip similar DIN 1142 Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium

The processing of granules into coated long products requires high precision with tools and machine settings as well as sound expertise in the specific characteristics of the materials. As an extrusion specialist of steel cables and other long products such as wires, glass-fibre rods, we offer a wide service range: Plastic coating from ca. 0.5 to 24mm, PA, PE, PP, PUR and PVC and more, additives for special requirements, such as the UV and water resistance, circular cross sections and special dimensions and stock colours or your own selection.

Wire Rope Cutters

Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium

Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium

Cable Cutters Wire Rope Cutters Rebar Cutters Steel Cutters Chain Cutters Chain Blasters Cutter for Wire of Prestressed Concrete Flat Bar Cutters Thread Cutters Nut Splitters Nibblers for Sheet Metal Cable Stripping Tools Sheat Peeling Tools

Simplex-, Duplex-clamps, wire rope clips, various turnbuckles, thimbles made from stainless steel

Simplex-, Duplex-clamps, wire rope clips, various turnbuckles, thimbles made from stainless steel

Turnbuckle (available with hook+eye/eye+eye - hook+hook on request) Simplex-, Duplex-clamps, wire rope clips, various turnbuckles, thimbles made from stainless steel

BioTac MP Environmentally friendly multi-purpose EP grease Description Castrol BioTac MP is an environmentally friendly multi-purpose EP grease and is based on a lithium complex thickener, a biodegradable base oil and a performance-optimized additive system, which gives the product corrosion protection, oxidative stability and load-bearing properties. The use of polymers improves the grease's adhesive properties and water resistance, ensuring a clean environment. Application Castrol BioTac MP was primarily developed for maritime use on open decks. It can be used for plain bearings, wire ropes and open gears, such as those found in: B. can be found in towing and load winches. Advantages -Good load-carrying capacity protects the components under high loads and reduces wear -High base oil viscosity ensures a strong lubricating film that protects components better at low speeds

For highest contact pressure and high circumferential speed, e.g. for rotary kilns, ball mills, rotary barrel mixers, ball mills, rope winches or friction presses also for guiding elements, slide bars, heavy transport chains and closed wire ropes Lubrication of rotating assemblies of convertors, cranes, crushers and dredges with spray or central lubricating systems Lubrication of heavily loaded gear couplings Advantages and benefits Most suitable for reliable supply of open gears, even at high circumferential speed Very efficient through EP additives in association with a specific combination of solid lubricants and adhesive additives Reliable protection of tooth flanks, even at high temperatures and with extended relubrication time Good pressure resistance of the lubricating film, excellent wear protection The film is not embrittling and aging. Without bitumen, solvent, does not contain heavy metals

Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral

Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Also available as spray version OKS 451

Lever hoists, also known as ratchet lever hoists, are mechanical devices used for lifting and pulling heavy loads in a wide range of industries. They commonly consist of a lever, a chain or wire rope, and a ratchet and pawl mechanism. Lever hoists work by applying force to the lever, which rotates the gears and tightens the chain or rope around the load. The ratchet and pawl system locks the load in place, preventing it from descending unintentionally. This working mechanism helps lever hoists offer a compact and portable solution for lifting and pulling operations in various industries, such as construction, maintenance, and transportation. Armed with an all-metal and impact-resistant body, Ronix RH-4110 is the 1.5T variant of our lineup of lever hoists with a proof load of 22.5kN

Cable

Bracket (occupant protection)

Bracket

(occupant protection)

(occupant protection)

(occupant protection)

Threaded rods for wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. Other dimensions on request!