Results for
CARL FRIEDRICH USBECK KG
Germany
1 internal /*1 external thread M 10*Ø 12 mm*size of jaw 10 mm
Request for a quoteCARL FRIEDRICH USBECK KG
Germany
stainless steel*ground surface*Ø 12 mm
Request for a quoteCARL FRIEDRICH USBECK KG
Germany
stainless steel*ground surface*threaded M 10*Ø 12 mm
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Threaded rods for wedge sockets in special design with property class 8.8 for applications with high-tensile bearing means Surface black passivated ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. Other dimensions on request!
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Threaded rods for wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. Other dimensions on request!
Request for a quoteIGUS® GMBH
Germany
igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm When to use it? When you want to save weight When rotating, oscillating and linear movements should be implemented When high-frequency oscillations/vibrations predominate When a low-noise operation is desired When an electrically insulating part is required When freedom from corrosion is desired For combinations with pneumatic cylinders and gas struts When chemical resistance is required When high stiffening is required When not to use? When you have temperatures above +80°C (then HT options) When rotation speeds in excess of 0.5 m/s should be implemented When very high tensile and lateral loads prevail When applications should be implemented with hydraulic cylinder When dimensions over 30 mm are needed igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm Special properties of the igubal® rod end bearings Maintenance-free, self lubricating High stiffening Very high fatigue strength in varying loads Compensation for alignment errors Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight Dimensional series K and E, dimensions according to DIN ISO 12240 Version with metal sleeve in the spherical ball for enhanced torque Tolerances igubal rod end bearings can be used, according to the application, with different tolerances. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have a tolerance between h6 and h9. Please contact us in case you require lower or more bearing tolerances. Loads igubal® rod end bearings take high forces in normal ambient temperatures, have excellent dampening properties and weigh only a fifth of the conventional metallic bearing housing. In particular cases the load carrying capacity of the rod end bearings should be checked in a practical trial especially with high constant loads and at higher temperatures. Coefficients of surface friction and speeds Rotary motions of the mounted shaft take place directly in the bearing ball made of iglidur® W300. The advantage of this plastic/steel plain bearing is that high speeds can be achieved in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. The maintenance-free igubal® rod end bearings casually permit linear and oscillating movements of the shaft. Delivery program igubal® rod end bearings are available in the dimensional series K and E for shaft diameters of 2 to 30 mm in all dimensions according to DIN ISO 12240, and of course respectively in the Form A - with male thread and Form B - with female thread The dimensional series K and partly E are moreover available in inch dimensions and – as special version – with a stainless steel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes. igubal® rod end bearings - Applications igubal® rod end bearings - Applications Temperatures Dimensional series K in A+B variants for temperatures upt to +200°C (HAT material).
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Rod gripper with a neodymium magnet in a steel housing. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The rod gripper has no thread and is usually glued or pressed in.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Rod gripper with a neodymium magnet in a brass housing. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The rod gripper has no thread and is usually glued or pressed in.
Request for a quoteOTTO EICHHOFF GMBH & CO. KG
Germany
Bolt with head (according to EN 22340) Bolt without head (according to EN 22341) Stud bolts (stress bolts) (according to DIN 2510) Blocking pins Fox bolts (according to DIN 1434 etc.) Spacer bolts Threaded bolts, threaded pins, stud bolts, threaded rods (according to DIN 913-916, 939, 976, 2510) Double-threaded bolts with rolled-on thread on one or both sides
Request for a quoteTOX-DÜBEL-TECHNIK GMBH
Germany
Features • Ideal for perforated brick (Poroton) and cellular concrete (Ytong) • Extremely high holding values • Spreads in several directions • Rotors prevent rotation in the drill hole • 100% nylon • Long expansion range for secure anchoring • Also suitable for metric threaded rods Description & Area of Application • Multiple expansion by 2-way separated expansion elements which are offset by 90° with moving rotors and flexible wall plug neck • Large anchoring depth
Request for a quoteGLT BEARINGS GMBH
Germany
Our rod ends in the best quality for you We manufacture rod ends in various designs for you. You can order these in our online shop in the desired dimensions and with individual adjustments. We will also be happy to supply you with other unique designs at short notice on request. Convince yourself of our more than 40 years of experience in plain bearing technology! Rod ends consist of a housing and a built-in spherical plain bearing. The housing of a screwable rod end has an external or internal thread. Rod ends are particularly suitable for use in linkage and lever connections. In our product range, you will find both maintenance-free and maintenance-bound rod ends. Our special hydraulic rod ends are available either for bolting on or for welding on. Our rod ends are suitable for high static loads. The maintenance-required rod ends can withstand changing loads and impact loads permanently without any problems, while maintenance-free models can only do this to a limited extent.
Request for a quoteTOX-DÜBEL-TECHNIK GMBH
Germany
Features • A single solution for everything: Building authority approval for cracked & uncracked concrete, perforated and solid masonry and additional reinforcement connections • LEED and emission tested: for ecological and healthy living • Usual threaded rods* can be used • Earthquake tested C1 • Processing even possible at extremely low temperatures (down to -10° C) • Can be used in wet and water-filled drill holes • Small axis and edge distances for anchoring without spreading pressure • Fixing of high loads weighing up to 13.3 tonnes • Can also be processed overhead • Reuse of the broken cartridge by changing the static mixer • Variable anchoring depth – saves time and material *according to Approval Description & Area of Application • Liquix Pro 1 is a styrene-free, vinylester injection mortar available in various cartridge types and cartridge sizes with static mixer Liquix Mix • For approval-relevant fixings in cracked and uncracked concrete and masonry
Request for a quoteBIZERBA SE & CO. KG
Germany
Electromechanical load receptor without lever work entirely made of s/s for wall mounting The wall mounted scale with folding table iL Special 150T/SP is an electromechanical load receptor w/o lever work entirely made of 1.4301 stainless steel designed for wall mounting. Depending on the installation location, a variety of fixture elements are available for optional attachment using pins, injection anchors or threaded rods. This wall-mounted scale has a folding stainless steel platform and an integrated rear panel.
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Eyelet bolts Eyebolts with larger eye (forged) ATTENTION: The strength of the eyelet bolt must be in accordance to the strength of the wire rope. * Please indicate length of thread with your order
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SÜTHER & SCHÖN GMBH
Germany
Eye bolts acc. to DIN 444 with property class 8.8 for applications with high-tensile bearing means surface black passivated ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. Item-no.: S05 00XX A0 ### 444 Insert the thread size for XX and the bold length for ### in the item-no. Other dimensions on request!
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Rope suspensions with wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. L2 =Standard lengths of the threaded rods are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and a threaded rod of 310 mm: KG1 0800 A0 310 SSN
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Rope suspensions with wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. L2 = Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and a threaded rod of 310 mm: KG1 0800 A0 310 SSN
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Wedge sockets in special design with screw galvanized surface With type testing similar to EN 13411-6 ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. material: G20Mn5N * material: GE240 ** material: GGG50 DIN 1693 *,** The standard design of these wedge sockets is not suitable for the use in areas liable to frost. Designs with a guaranteed impact test at lower temperatures are deliverable on request. Please find certificates and instructions in our download area:
Request for a quoteASKUBAL - ASK-KUGELLAGERFABRIK ARTUR SEYFERT GMBH
Germany
Our rod ends are available in various versions: steel, stainless steel, maintenance free, maintenance required, female thread, male thread, left-hand thread, right-hand thread, fine thread, tempered, heat-treated, special versions, customized versions
Request for a quoteASKUBAL - ASK-KUGELLAGERFABRIK ARTUR SEYFERT GMBH
Germany
Our rod ends are available in various versions: steel, stainless steel, maintenance free, maintenance required, female thread, male thread, left-hand thread, right-hand thread, fine thread, tempered, heat-treated, special versions, customized versions
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel rod, which is manufactured completely from stainless steel (Ø 42 mm), is used to install building components and (sub)structures on a roof surface. Our ABS UniMount is a flexible solution which can be used to install solar panels and photovoltaic modules, air conditioning systems and similar components. It can can either be installed on a concrete or steel surface. Base plate (130 x 130 mm) + welded-on mounting rod (Ø 42 mm) Female thread (M 10) at the top end For steel surfaces with a depth of at least 5 mm For horizontal and vertical loads of max. 3 kN Incl. stainless steel installation set
Request for a quoteFATH GMBH
Germany
Adjustable feet in over 20,000 variations — fixed adjustable foot — hinged adjustable foot function: — screw-on (with screw-on hole/with extension arm/through accessories: floor mounting for trapeze plate) — levelable — swiveling — anti-slip (by accessories: anti-slip plate made of thermoplastic elastomer) — EDS-capable Plate shape and size: — Round — Trapezoidal shape — Square — Diameter 20 mm to 120 mm other shapes on request Material plate: — Plastic PA, glass ball reinforced — steel, galvanized — zinc die casting — stainless steel other materials and surfaces on request Threaded rods for adjustable feet with/without ball head — swivel range 0° - 20° degrees — M5, M6, M8, M10, M12, M14, M16, M20, M24, M30 — Length: 20 - 300 mm — Alternative: ball head with internal thread — Material: galvanized steel, stainless steel Colors: black, silver, other colors on request
Request for a quoteFATH GMBH
Germany
Flexible leveling feet Swiveling, leveling adjustable feet to compensate for uneven floors Swivel range : ± 4 ° to 20°. Adjustable foot plate: different shapes possible from diameter 20 mm to 120 mm Material: plastic PA (also ESD-capable possible) / zinc die-cast / stainless steel Color: black / bright, other colors on request Optionally with anti-slip plate: prevents adjustable feet from slipping on smooth industrial floors and can dampen vibrations Fastening to the floor with different versions: Optionally with screw holes in the plate Plate with extende base Base plate for safe subsequent mounting threaded rod: Material: steel / stainless steel Surface: galvanized / bright Alternative: ball head with internal thread Optionally with lock nut Translated with www.DeepL.com/Translator (free version)
Request for a quoteKAMPMANN GMBH & CO. KG
Germany
TIP – Well-tempered air The solution for the optimum, centrally controlled heating and ventilation of buildings of all kinds. With a housing made of sendzimir galvanised sheet steel with threaded rods fitted as standard, TIP unit heaters are ideal for wall-mounting as well as ceiling-mounting. Functional principle Air is drawn in through the sheet metal sickle-blade silently-operating fan and is blown through the copper/aluminium heat exchanger into the room. The models with large heat exchange depth are ideal for use with low temperature operation. Benefits —Sickle-blade, whisper-quiet fan with optimised full nozzle —Easy to install —Unbeatable in terms of value for money Kampmann is completely modernising its unit heaters. We are responsibly taking a courageous step forwards and we will be relying systematically on EC technology to power and control our units. Reasons: — No wasted power — Minimum noise levels — ErP-compliant future
Request for a quoteResults for
Rods- threaded - Import exportNumber of results
28 ProductsCountries
Category