Riggings - Import export

Geodrill 8R Geodrill 20V QuickLoop ground loop inserter

GRUNDOMAT GRUNDORAM GRUNDOPIT GRUNDODRILL GRUNDOBORE Software Maxi HDD rigs Pipe and cable plows

For controlled and steered bores, In limited space, for high precision requirements, For house service connections on sloping terrains, beneath stairs, walls etc., bores that can’t be established using a soil displacement hammer up to 50 m bore lengths, For bores directly out of the building, as the machine is able to be dismantled, For bores out of manholes from 1 m diameter on (PIT S), For a quick, clean and economic jobsite execution.

For controlled and steered bores, In limited space, for high precision requirements, For house service connections on sloping terrains, beneath stairs, walls etc., bores that can’t be established using a soil displacement hammer up to 50 m bore lengths, For bores directly out of the building, as the machine is able to be dismantled, For bores out of manholes from 1 m diameter on (PIT S), For a quick, clean and economic jobsite execution.

GAT torsion motors are supplied as individual components or as complete torsion system consisting of torsion motor unit, application-specific control electronic s and hydraulic supply. Comprehensive consultation services from concept planning phase to commissioning complement our portfolio. GAT torsion motors consisting of a basic motor and a GAT rotary union are designed for quasi-static, pulsating and dynamic loads. Speed and torque as testing parameters are controlled independently. The torsion test rig with mechanical torsion application allows the energy-efficient testing of components at relatively low investment costs. Using a hydrostatic torsion motor in the test rig creates realistic and consistent testing conditions leading to test results very close to real-life conditions.

Application Motor for testing gearboxes.

Application Motor drives fan of climatic wind tunnel. In this wind tunnel trains up to 100m length can be tested.

Application The HMB Honing Rigs are designed for honing cylinder liners removed from the engine block with the corresponding mobile Hunger PHM Honing Machines. - Honing Rig Type HMB 340 is tailored to the Honing Machine Type HBM 340. - Honing Rig Type HMB 640 is tailored to the Honing Machine Type HBM 640. Features Rigid base structure including upright supporting tubes for mounting the mobile PHM Honing Machine. The liner to be honed is placed on top of a honing liquid reservoir which is slideably mounted on the base structure. The reservoir can be drawn out for ease of loading and unloading of the cylinder liner by means of a crane. An electric pump is provided to supply honing liquid to a spray nozzle. The spray nozzle is mounted on a magnetic base which can be attached to the frame tube to direct the honing liquid to the area to be honed.

Dokumentation in der Datenbank

dieser Prüfstand verfügt über einen völlig neuartigen, magnetisch erregten Linearantrieb zum Prüfen von unterschiedlichsten dynamischen Prüflingen, wie z. B. Stoßdämpfern, Federungen aller Art, Gummilagern, etc.

This gas filling system fills up the gas of shock absorbers and determins the gas strength and friction. It is also for manufacturing (filling) and testing.

This test rig tests shift clutches.

This test rig tests clutch disks.

With this machine chassis tunings are accomplished.

Aircushion test rig for four test specimens: Nominal strength: 40 kN Nominal frequency: 1.2 zu 12 Hz

Test rig for the leak test of headlights.

Description: Transverse force spindle. Function: introduction of a transverse force on a shock absorber.

This machine tests turn signals and installs with positive validating a frame cover.

Shock absorber test rig for 2 test specimens. Nominal strength 16kN

Mit dieser Anlage werden Bolzen und Halter auf ein Rohr aufgebracht. Die Anlage ist mobil.

Gasfüllanlage für externe Gastanks mit Lochstation und Trennkolbenöler Kolbenstangen-Prüfanlage: Mit dieser Anlage werden Kolbenstangen für Stoßdämpfer vorgeprüft und später zu einem fertigen Stoßdämpfer komplettiert. Die Anlage arbeitet vollständig automatisiert.

mobile test rig for the axles of trucks and industrial vehicles This test rig tests chassis components.

The gearbox test rig was fully assembled in our facilities in Gochsheim, including drive and output machinery, hydraulics, gearbox, etc. The end client then preliminarily accepted it It was then dismantled, packaged and sent to the end client Then completely rebuilt at the end client’s facilities. Later dismantled and reassembled again for noise testing at a special site.

Various test rigs: - Alternating bending test rig for seating furniture: seat/back rest load acc. to BIFMA X5.1, EN 581-2, EN 1335, EN 1728, BS 5459 - Double test rig for chair testing: seat and backrest tests, side-to-side tests and armrest tests according to EN 1335, EN 581-2, EN 1728, BIFMA X5.1, BIFMA X5.4, BIFMA X6.5, BS 5459 - Test rig for alternating bending tests of arm rests according to EN 1335, EN 1728, EN 581-2, DIN 4551, BIFMA X5.1 and BSI/BS 5459 - Portal drop test rig: testing of chairs, stools, tables, beds acc. to BIFMA X5.1, BIFMA X6.1, EN 581-2, EN747-2, EN 1728, EN 1730, ISO 7173, EN 12520, EN 14072 - Test bench for determining the stability of chairs in accordance with the standards EN 1022, EN 1729-2, EN 581-2, ISO 7174-2 and BIFMA X5.1 - Test rig for tilting drop tests at chairs according to DIN 68878/1 - Swivel test rig according to DIN 4551, EN1335, NEN 1812 and BIFMA X5.1