Retention - Import export

Optigrun Meander Water Retention Board FKM 30 is used for multi-layered extensive green roofs.

Infiltration trough made of recycled PP intended for surface drainage in combination with a Flow Control System; high water retention potential, used for extensive green roofs with 0° roof pitch.

Water Retention Box made of recycled PP material. With high temporary and possibly permanent retention volume in combination with a Flow Control System for specific regulation of water discharge and/or water storage.

SPIROL's BP100 Press-N-Lok™ Pin has opposing barbs on each end of the pin and is designed to permanently retain two plastic components to each other such as two halves of a plastic enclosure. Press-N-Lok™ Pins are installed in two stages: First, press the pins into one half of the plastic housing. Next, align the other half of the housing with the exposed pins and press into place. During installation, the plastic will backfill into the area around the barbs resulting in maximum resistance to axial force. SPIROL's Press-N-Lok™ Pins are manufactured from lightweight, lead free aluminium as a standard, and available to order in austenitic stainless steel. BP100 Press-N-Lok™ Pins are available in diameters ranging from 2mm to 4mm.

Increase containment of dialysis system media Designed for depth filtration efficiency, fluid flow, back pressure and excellent chemical and physical resistance, POREX ® retention filters provide specified containment of dialysis system media, such as those that utilize concentrated liquid sodium bicarbonate. Trusted by manufacturers around the world, our customized retention filters: Provide specific containment–Customized filters provide containment of dialysis system media, including those systems that use concentrated liquid sodium bicarbonate. Increase filtration efficiency– Designed for depth filtration, fluid flow, back pressure and excellent chemical and physical resistance of dialysis media. The depth filter provides a more complete and secure filtration vs. typical screen filters. Can be customized –Tailored to accommodate specific device design requirements of dialysis media.

Increase containment of dialysis system media Designed for depth filtration efficiency, fluid flow, back pressure and excellent chemical and physical resistance, POREX ® retention filters provide specified containment of dialysis system media, such as those that utilize concentrated liquid sodium bicarbonate. Trusted by manufacturers around the world, our customized retention filters: Provide specific containment–Customized filters provide containment of dialysis system media, including those systems that use concentrated liquid sodium bicarbonate. Increase filtration efficiency– Designed for depth filtration, fluid flow, back pressure and excellent chemical and physical resistance of dialysis media. The depth filter provides a more complete and secure filtration vs. typical screen filters. Can be customized –Tailored to accommodate specific device design requirements of dialysis media.

Increase containment of dialysis system media Designed for depth filtration efficiency, fluid flow, back pressure and excellent chemical and physical resistance, POREX ® retention filters provide specified containment of dialysis system media, such as those that utilize concentrated liquid sodium bicarbonate. Trusted by manufacturers around the world, our customized retention filters: Provide specific containment–Customized filters provide containment of dialysis system media, including those systems that use concentrated liquid sodium bicarbonate. Increase filtration efficiency– Designed for depth filtration, fluid flow, back pressure and excellent chemical and physical resistance of dialysis media. The depth filter provides a more complete and secure filtration vs. typical screen filters. Can be customized –Tailored to accommodate specific device design requirements of dialysis media.

Increase containment of dialysis system media Designed for depth filtration efficiency, fluid flow, back pressure and excellent chemical and physical resistance, POREX ® retention filters provide specified containment of dialysis system media, such as those that utilize concentrated liquid sodium bicarbonate. Trusted by manufacturers around the world, our customized retention filters: Provide specific containment–Customized filters provide containment of dialysis system media, including those systems that use concentrated liquid sodium bicarbonate. Increase filtration efficiency– Designed for depth filtration, fluid flow, back pressure and excellent chemical and physical resistance of dialysis media. The depth filter provides a more complete and secure filtration vs. typical screen filters. Can be customized –Tailored to accommodate specific device design requirements of dialysis media.

Optigrun Water Retentionbox WRB 170 on roofs used as retention areas, under extensive and intensive vegetation as well as traffic areas such as terraces, fire brigade access roads, car parks, etc.With closed, load-distributing structure For temporary and/or permanent storage of rainwater with regulated water discharge through a Flow Control System With Capillary Bridges to transport stored rainwater from the drainage level into the substrate layer and to increase evaporation High compressive strength With freely flowable structure for quick distribution of rainwater within the retention room Suitable for inverted roofs (when used on inverted insulation, no permanent water storage is possible)

Infiltration trough made of recycled PP intended for surface drainage in combination with a Flow Control System; high water retention potential, used for intensive green roofs with 0° roof pitch and varying layer heights.Base plate with load-distributing structure For temporary and/or permanent storage of rainwater with regulated water discharge through a Flow Control System High compressive strength With freely flowable structure for quick distribution of rainwater within the retention room Suitable for inverted roofs (when used on inverted insulation, no permanent water storage is possible

Optigrun Meander Water Retention Board FKM 60 is used for multi-layered extensive green roofs.

The reagent covalently binds to cell surface and intracellular proteins and strongly stains membrane-damaged dead cells. In addition, the dye does not leak after immobilization and permeabilization of cells. The difference in fluorescence intensity between live and dead cells after staining is significant, and dead cells can be easily distinguished and excluded from analysis by flow cytometry.

The reagent covalently binds to cell surface and intracellular proteins and strongly stains membrane-damaged dead cells. In addition, the dye does not leak after immobilization and permeabilization of cells. The difference in fluorescence intensity between live and dead cells after staining is significant, and dead cells can be easily distinguished and excluded from analysis by flow cytometry. Product group: Dyes Storing temperature: 2-8°C Shipping condition: ambient

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1460 x 1460 x 620 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -with raised platform -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1460 x 1460 x 1083 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 1200 x 285 -Retention capacity in l: 240 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -100 mm ground leeway -galvanized grid (load capacity 650 kg/m²) -conical construction -can be stacked -for use with a pallet truck or forklift truck -shipping unit: 15 units on a europallet -for flammable liquids of the GHS-categories 1-3 -for water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 800 x 800 x 455 -Retention capacity in l: 222 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 2650 x 1300 x 435 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -with raised platform -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 2650 x 1460 x 863 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 1200 x 410 -Retention capacity in l: 440 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

The carbide bushing serves the purpose of preventing tool damage caused by pulled up slug. ADVANTAGES: — Bushings made of carbide — Carbide punches (upon request) — Avoidance of tool damage caused by scrap (pulled up slug), resulting in downtime with corresponding costs — Quality, proven millions of times — Can be produced according to specific customer drawings — Also available without slug retention