Results for
ROLLON GMBH
Germany
Versatile and innovative curved linear guides with radial ball bearing rollers. The curvilinear guides are available in different versions, with constant or variable radius. CURVILINE is ideal for applications such as curved machine housings, door systems in trains or boats, or customized packaging units. Two rail widths: 16mm and 23mm Zinc plated rails and sliders as per ISO 2081 Strokes over 3,000mm Straight and curved paths in one rail Sliders with four rollers, arranged in pairs, maintain the preload over the whole length of the rail Parts as per drawing, customized for each application The Curviline linear guides product family is used for all non-linear motion applications. The linear rails are available in two widths, and made to fit the customer’s design. A single rail can have both curved and straight sections. Main fields of application for Curviline linear guides: Railway Naval Packaging Food & Beverage
Request for a quoteROLLON GMBH
Germany
Uniline System is a family of pre-assembled linear units boasting a compact size and high speed ensured by the COMPACT RAIL roller bearings, mounted on a self-sustaining extruded aluminum profile. The linear units are driven by a steel reinforced polyurethane belt system. The horizontal seals and the raceway cleaners fitted on both ends of the carriage ensure full protection from dirt. The linear actuator profile is compatible with an endless number of widely available standard fixing accessories. The motor can be connected to the units by means of a full or a hollow shaft Up to 3,000mm strokes Sizes from 40 x 51.5mm up to 100 x 122.5mm Versions available with long sliders and multiple sliders Using linear rails from the COMPACT RAIL family ensures excellent performance in terms of speed and life. The rails in the linear axes of the four product series are laid out in different combinations to meet all application requirements. Using long or multiple sliders increases the...
Request for a quoteROLLON GMBH
Germany
Sturdy and practical linear rails with radial ball bearing sliders. The X-Rail is a family of linear guides with radial ball bearing sliders for applications requiring cost efficiency and high resistance to corrosion. The linear guides with shaped raceways and the linear guides with flat raceways are available in stainless steel or galvanised or nitrided metal sheeting. With the T + U configuration, the X-Rail system can compensate for any axial misalignment in parallelism of the mounting surfaces.
Request for a quoteROLLON GMBH
Germany
Sturdy and practical galvanized or stainless steel linear rails with radial ball bearing sliders. The X-Rail is a family of linear guides with radial ball bearing sliders for applications requiring cost efficiency and high resistance to corrosion. The shaped raceway rail, the flat raceway rail and the telescopic rail are available in stainless steel or galvanized sheet metal. With the T + U configuration, the X-Rail system can compensate for any axial misalignment in parallelism of the mounting surfaces. Three rail width sizes: 20mm, 30mm and 45mm Standard rail lengths up to 3,120mm; different lengths upon request Low coefficient of friction Combination of T and U rails for self-aligning bearing applications Easily adjustable slider preload Polymer based wipers available for added roller bearing protection (available on for the thin body style slider) High temperature resistance up to 120°C/250°F The stainless steel X-Rail linear guide version is corrosion resistant, and ensures...
Request for a quoteROLLON GMBH
Germany
Compact Rail is a linear system consisting of steel linear rails with induction hardened raceways and high precision radial ball bearing sliders, also made of hardened steel. Thanks to their self-aligning capabilities, Compact Rail linear guides simplify the project, improve the performance and reduce the overall cost of application. Compact Rail linear guides are easy to install on all types of surfaces, including non-machined ones. Compact Rail linear guides feature a robust steel slider with ball bearings, self-centering heads with wipers, longitudinal seals to protect the internal components and a top sealing strip. The slider body is accurately finished with matte longitudinal edge chamfer and a shining ground flat surface. The slider heads are equipped with special slow release felt pads and are free to rotate with respect to the slider body, so that the felts are always in contact with the raceways to ensure optimal lubrication.
Request for a quoteIGUS® GMBH
Germany
Good with chemicals d1 [mm]: Rings: Cage: Balls: xiros® material data xiros® polymer ball bearing design, applications, development and testing xiros® chemical resistance xirodur® C160 radial grooved ball bearing The ball bearing material xirodur® C160 offers extreme media resistance, but is inexpensive. xirodur® C160 can be used in the temperature range of up to +80°C. Lubricant- and maintenance-free Resistant to corrosion and chemicals Nonmagnetic and washable Life time predictable Lightweight Low friction Electrically insulating Industries: Electroplating, chemical industry, plant design d1 [mm]: Rings: Cage: Balls:
Request for a quoteIGUS® GMBH
Germany
xirodur® B180 radial grooved ball bearing xiros® B180 polymer ball bearings are suitable for use up to +80°C. The specially developed material xirodur® B180 provides high durability and good value for money. Lubricant- and maintenance-free Nonmagnetic and washable Corrossion-resistant Life time predictable Lightweight For shaft diameter 3–60 mm Electrically insulating Industries:Measuring technology, electronics, office technology, vacuum technology, cleanroom technology, etc. Balls: xiros® material data 3D CAD data on xiros® B180 polymer ball bearing xiros® polymer ball bearing design, applications, development and testing xiros® chemical resistance xirodur® B180 radial grooved ball bearing xiros® B180 polymer ball bearings are suitable for use up to +80°C. The specially developed material xirodur® B180 provides high durability and good value for money. Lubricant- and maintenance-free Nonmagnetic and washable Corrossion-resistant Life time predictable Lightweight For shaft diameter 3–60 mm Electrically insulating Industries:Measuring technology, electronics, office technology, vacuum technology, cleanroom technology, etc. Balls:
Request for a quoteGMN PAUL MÜLLER INDUSTRIE GMBH & CO. KG
Germany
The use of high-precision radial groove ball bearings is especially recommended when axial forces are supported in two directions, but the installation space makes the use of a spindle bearing pair impossible; plus when the best-possible guide for rotating components is needed, but the RPM requirements are less important. Depending upon the load capability and the installation space available, GMN provides deep groove ball bearings in sizes 60 and 62 as per DIN 625. A large selection of various cages, lubricants and covers make it possible to adapt GMN deep groove ball bearings to any application.
Request for a quoteREICH-KUPPLUNGEN ; DIPL.-ING. HERWARTH REICH GMBH
Germany
Highly torsionally flexible coupling ARCUSAFLEX-VSK for drive shafts * Linear torsional deflection characteristic * Elements available in different torsional stiffnesses * Enhanced damping capacity through frictional damping * Maintenance-free coupling bearings * Radial bearing close to the cardan joint * A variety of designs for different cardan shaft configurations * Many types with SAE connection dimensions or as specified * Compact construction, the highly flexible element being protected by the housing * Fail-safe device visible from the outside for ease of inspection
Request for a quoteMBS-HYDRAULIK GMBH & CO KG
Germany
The MBS standard cylinder series is characterized by a variable and stroke-independent welded construction. Due to the uniform force transitions between the different sizes and the different connection situations, they are often used in the areas of mobile and stationary hydraulics. Cylinder connection is via welded rod ends and bolted radial bearings. Connections with threaded holes for pipe fittings according to BSPP ISO 1179-2 are planned. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the data sheet for detailed information:
Request for a quoteREICH-KUPPLUNGEN ; DIPL.-ING. HERWARTH REICH GMBH
Germany
The highly torsionally flexible ACRUSAFLEX-VSK coupling is used in a drive train when a large shaft displacement or an extended distance between the drive and the driven components must be compensated. Depending on the arrangement of the drive train components, a non-uniform motion of the speed may result, and since cardan shafts exhibit some torsion flexibility, the mass of the prime mover and driven machine may induce a resonant system. Advantages of the highly tosrionally flexible ARCUSAFLEX-VSK couplings: Linear torsional deflection characteristic Elements available in different torsional stiffnesses Enhanced damping capacity through frictional damping Available in 9 sizes: from 390 Nm to 20.000 Nm Maintenance-free coupling bearings Radial bearing close to the cardan joint •A variety of designs for different cardan shaft configurations •Many types with SAE connection dimensions or as specified •Compact construction, the highly flexible element being protected by the...
Request for a quoteREICH-KUPPLUNGEN ; DIPL.-ING. HERWARTH REICH GMBH
Germany
The barrel coupling consists of a sleeve provided with semicircular toothing around its internal diameter and a hub that is externally toothed in a similar way. A series of cylindrical barrels, of hardened steel, are inserted in the holes formed by this toothing to act as power transmission elements. Covers with their corresponding special seals serve to assure the perfect tightness of the inner zone, preventing the penetration of dust and guaranteeing the continuity of the necessary lubrication. The most important characteristics and adcantages of barrel roll couplings: for alignment error compensation for ease of assembly especially wear-resistant with high durability minimises effect of alternative bending of the torque on the toothing designed for bearing large radial loads by distributing them over large barrel support surfaces Perfect tightness of the inner zone prevent the penetration of dust We are glad to see that you are interested in our product line and are happy to...
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
HENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Like all Hense rotary vane motors, rotary vane motors in the HSS series are designed according to the rotary vane principle. The drive shaft has axial and radial plain bearings in coated bushes. The coating used is tribologically optimized and ensures low wear. Sufficient lubrication of the bearing points is ensured by the supplied hydraulic oil. To reduce the internal friction of the motor, the hydraulic separation of the working chambers in this series is partly achieved by means of pressure and viscosity-dependent throttle sections. HSS motors are ideal for generating oscillating swivel movements in the frequency range with small angular amplitudes in controlled systems. The HSS series is therefore recommended for use whenever semi-dynamic torsion tests need to be carried out reliably and cost-effectively.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Like all Hense rotary vane motors, rotary vane motors in the HSS series are designed according to the rotary vane principle. The drive shaft has axial and radial plain bearings in coated bushes. The coating used is tribologically optimized and ensures low wear. Sufficient lubrication of the bearing points is ensured by the supplied hydraulic oil. To reduce the internal friction of the motor, the hydraulic separation of the working chambers in this series is partly achieved by means of pressure and viscosity-dependent throttle sections. HSS motors are ideal for generating oscillating swivel movements in the frequency range with small angular amplitudes in controlled systems. The HSS series is therefore recommended for use whenever semi-dynamic torsion tests need to be carried out reliably and cost-effectively.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Like all Hense rotary vane motors, rotary vane motors in the HSS series are designed according to the rotary vane principle. The drive shaft has axial and radial plain bearings in coated bushes. The coating used is tribologically optimized and ensures low wear. Sufficient lubrication of the bearing points is ensured by the supplied hydraulic oil. To reduce the internal friction of the motor, the hydraulic separation of the working chambers in this series is partly achieved by means of pressure and viscosity-dependent throttle sections. HSS motors are ideal for generating oscillating swivel movements in the frequency range with small angular amplitudes in controlled systems. The HSS series is therefore recommended for use whenever semi-dynamic torsion tests need to be carried out reliably and cost-effectively.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Like all Hense rotary vane motors, rotary vane motors in the HSS series are designed according to the rotary vane principle. The drive shaft has axial and radial plain bearings in coated bushes. The coating used is tribologically optimized and ensures low wear. Sufficient lubrication of the bearing points is ensured by the supplied hydraulic oil. To reduce the internal friction of the motor, the hydraulic separation of the working chambers in this series is partly achieved by means of pressure and viscosity-dependent throttle sections. HSS motors are ideal for generating oscillating swivel movements in the frequency range with small angular amplitudes in controlled systems. The HSS series is therefore recommended for use whenever semi-dynamic torsion tests need to be carried out reliably and cost-effectively.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Like all Hense rotary vane motors, rotary vane motors in the HSS series are designed according to the rotary vane principle. The drive shaft has axial and radial plain bearings in coated bushes. The coating used is tribologically optimized and ensures low wear. Sufficient lubrication of the bearing points is ensured by the supplied hydraulic oil. To reduce the internal friction of the motor, the hydraulic separation of the working chambers in this series is partly achieved by means of pressure and viscosity-dependent throttle sections. HSS motors are ideal for generating oscillating swivel movements in the frequency range with small angular amplitudes in controlled systems. The HSS series is therefore recommended for use whenever semi-dynamic torsion tests need to be carried out reliably and cost-effectively.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Like all Hense rotary vane motors, rotary vane motors in the HSS series are designed according to the rotary vane principle. The drive shaft has axial and radial plain bearings in coated bushes. The coating used is tribologically optimized and ensures low wear. Sufficient lubrication of the bearing points is ensured by the supplied hydraulic oil. To reduce the internal friction of the motor, the hydraulic separation of the working chambers in this series is partly achieved by means of pressure and viscosity-dependent throttle sections. HSS motors are ideal for generating oscillating swivel movements in the frequency range with small angular amplitudes in controlled systems. The HSS series is therefore recommended for use whenever semi-dynamic torsion tests need to be carried out reliably and cost-effectively.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Like all Hense rotary vane motors, rotary vane motors in the HSS series are designed according to the rotary vane principle. The drive shaft has axial and radial plain bearings in coated bushes. The coating used is tribologically optimized and ensures low wear. Sufficient lubrication of the bearing points is ensured by the supplied hydraulic oil. To reduce the internal friction of the motor, the hydraulic separation of the working chambers in this series is partly achieved by means of pressure and viscosity-dependent throttle sections. HSS motors are ideal for generating oscillating swivel movements in the frequency range with small angular amplitudes in controlled systems. The HSS series is therefore recommended for use whenever semi-dynamic torsion tests need to be carried out reliably and cost-effectively.
Request for a quoteSPINDEL- UND LAGERUNGSTECHNIK FRAUREUTH GMBH
Germany
When it come to cylindrical roller bearings, at SLF we produce only the highest quality and precision. Our cylindrical roller bearing come in a verity of styles and sizes. They range from 30 to 1600mm We manufacture these bearing in standered and specialy materials, special lubrication, special heat treatment and higher levels of precision. are produced in single-row, double-rowed, multiple-rowed and fully complement versions, with a wide range of radial load-bearing capacity We offer multiple types of cage and roller materials
Request for a quoteKFB CLARFELD GERMANY GMBH
Germany
Tapered roller bearings are composed of solid outer and inner rings with tapered raceways and tapered rollers with cage assembly. The bearings are separable. Therefore, the inner ring with the rollers and the assembly cage can fitted separated from the outer ring. Tapered roller bearings tolerate high radial and one sided axial forces. For axial steadying, a second bearing is usually necessary, which is then fitted mirror-inverted.
Request for a quoteTWK-ELEKTRONIK GMBH
Germany
Recording of the angular position and revolutions by means of Hall sensors - multiturn version with absolute transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via Profibus-DP. Robust housing manufactured from seawater-proof aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal - sensor circuit consisting of ASIC with Hall elements - electrical connections via the connecting cap with threaded cable connections. The absolute encoders are designed for direct connection to the PROFIBUS-DP. The interface is implemented with the SPC3 Siemens PROFIBUS controller. The protocol corresponds to DP-Slave Class 2 functionality in accordance with Profibus profile for encoders, No. 3.062, and is described in detail in the TRD 12770 user manual. The TRD is mechanicallly and electrically compatible with the electro-optical encoder CRD.
Request for a quoteTWK-ELEKTRONIK GMBH
Germany
Recording of the angular position and revolutions by means of Hall sensors - absolute multiturn transmission for up to 4096 revolutions - data output plus parameterisation and diagnosis via EtherCAT. Robust housing manufactured from seawater-resistant aluminium or stainless steel - stainless steel shaft - ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements - electrical connection via M12 connector or cable outlet. In the model series TRK absolute encoders, the EtherCAT interface is integrated according to IEC 61158-2 to 6 and encoder profile CiA DSP406. To achieve the SIL2 level, the TRK/S3 contains a redundant sensor system and additional internal monitoring mechanisms as well as safe communication via the FSoE (failsave over EtherCAT) protocol. The FSoE protocol is implemented according to the Safety over EtherCAT specification ETG.5100 version 1.2.0.
Request for a quoteResults for
Radial bearings - Import exportNumber of results
39 ProductsCountries
Category