Results for
KEBA FASTENINGS
Germany
are bolts hot forged from all common materials including stainless, acid resistant and heatproof (inductive hardening, case hardening, quenched and tempered) steel. Diameter range of M 12 - M 80 with lengths reaching up to 800 mm. Tailored manufacturing according to specific standards, drawings and samples.
Request for a quoteMEBA STEEL & INDUSTRIAL SUPPLIES TRADE GMBH
Germany
We supply both from stocks and productions wide range of round bars , certified acc to. EN 10204 2.2 and/or 3.1 Steels for General Use of EN 10025 (S235/275/355 JR/J0/J2) Steels for Quenching and Tempering acc. EN 10083-2, EN 10083-3 Steels for Case Hardening acc. EN 10084 (C10, C15, 16MnCr5, 20MnCr5, 36CrMn5 (UNI7845) Micro-alloyed Steels (18MnV5, 20MnV6) Free Cutting Steels acc. EN 10087(11SMn30/11SMn37) Other Grades upon request. Structural Steel Carbons Steel Case Hardening Steel Heat Treated Steel Spring Steel Free Cutting Steel Tool Steel Stainless Steel
Request for a quoteMEBA STEEL & INDUSTRIAL SUPPLIES TRADE GMBH
Germany
Case Hardening Steels & Steels for Quenching and Tempering EN 10083-2 Unalloyed Steel (C 35/C40/C45/C60, C22E – C60 E+U, +N) EN 10083-3 Alloyed Steel (25CrMo4, 34CrMo4, 42CrMo4, 51CrV4, 20MnB5, 30MnB5…) EN 10084 Case Hardening Steel (16MnCr5, 20MnCr5…)
Request for a quoteMEBA STEEL & INDUSTRIAL SUPPLIES TRADE GMBH
Germany
Unalloyed structural steel according to DIN EN 10025-2 (S 235/S275/355 JR/JO/J2/K2 +N/M/AR ) Fine grained structural steel according to DIN EN 10025-3 (S275/355/420 /460 N/NL …) EN 10025-4 Thermo-mechanical Rolled Structural Steels (S 275/355/420/460 ML ) EN 10025-5 Structural Steels with Improved Atmospheric Corrosion Resistance (S 235/355 JOW/JOWP/J2W/J2WP/K2W) EN 10025-6 High Yield Quenched and Tempered Fine Grain Steel (S 460/690/890/960 Q/QL/QL1)
Request for a quoteMEBA STEEL & INDUSTRIAL SUPPLIES TRADE GMBH
Germany
EN 10028-2 Unalloyed and Alloyed Heat Resistant Steels (P 235/265/355 GH, 16 Mo3, 13 CrMo4-5, 13CrMoSi5-5, 10CrMo9-10...) EN 10028-3 Weldable Normalized Fine Grain Steels (P275/355/460 N/NH/NL1/NL2) EN 10028-4 Ni-Alloyed Steels with Specified Low-Temperature Properties (13MnNi6-3, 12Ni14, X12Ni5, X8Ni9, X7Ni9…) EN 10028-5 Thermomechanical Rolled Fine Grain Structural Steels (P 355/460 M/ML…) EN 10028-6 Quenched / Tempered Fine Grain Structural Steels (P 355-690 Q/QH/QL)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
OTTO EICHHOFF GMBH & CO. KG
Germany
PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces
Request for a quoteWESTFÄLISCHE DRAHTINDUSTRIE GMBH
Germany
We supply the European and international market with cold heading wire / cold extruding steel in sizes ranging from 1.5 mm to 42 mm Production is based at the Hamm and Iserlohn sites, focussing on the following products: Cold heading wire / cold extruding steel Tempering steel Quenched and tempered steels / AFP steels Prehardened steels
Request for a quoteALPHA LASER GMBH
Germany
The AL-ROCK is a laser hardening system for surface hardening with a self-propelled caterpillar track. The laser can be brought directly to the workpiece. Time-consuming removal of the components to be hardened can often be avoided. The robot arm easily reaches the hard-to-reach places on the workpiece. All common metals can be hardened, e.g. Quenched and tempered steels, cold work steels and cast steel or gray cast iron. The material must have at least 80% pearlite. The degrees of hardness that can be achieved are identical to those of conventional hardening processes. In free 3D movements, the laser beam precisely follows even the most demanding three-dimensional workpiece contours, for example on tracks along closing edges. Pimples, scar structures. Simple points are also not a problem. Only the free access of the laser beam to the surface to be hardened is required. And the AL-ROCK can do even more - on request, the laser robot can also be used for laser welding.
Request for a quoteNITTO KOHKI EUROPE GMBH
Germany
Can be connected even with residual pressure in plug side hydraulic line. This Cupla is best for frequent connection of pressurized hydraulic lines. Super HSP Cupla socket can be connected easily with small power to standard HSP Cupla plug even with residual pressure on the plug side of the hydraulic line. For impact resistance, especially repeated impulses, special quenched steel is used for the body. This ensures original performance over a long period. The design reduces pressure loss, and so particularly suitable for hydraulic applications where enough fluid flow is essential. Both socket and plug have builtin automatic shutoff valves to prevent fluid spill out on disconnection.
Request for a quoteNITTO KOHKI EUROPE GMBH
Germany
Super HSP Cupla socket can be connected easily with small power to standard HSP Cupla plug even with residual pressure on the plug side of the hydraulic line. For impact resistance, especially repeated impulses, special quenched steel is used for the body. This ensures original performance over a long period. The design reduces pressure loss, and so particularly suitable for hydraulic applications where enough fluid flow is essential. Both socket and plug have builtin automatic shutoff valves to prevent fluid spill out on disconnection.
Request for a quoteNITTO KOHKI EUROPE GMBH
Germany
Quenched special steel body! Powerful impact resistance, especially against impulses. Valve is designed to suppress pressure loss, particularly suitable for hydraulic applications which need big fluid flow rates. Automatic shutoff valves in both socket and plug prevent fluid spill out on disconnection. Easy to handle. In addition to conventional female thread type, male thread types (male tapered thread, male parallel thread with 30˚ flare, and male parallel thread with 30˚ coneseat) are newly added. Male thread types are designed especially for direct connection to hydraulic power units effectively. Male parallel thread type complies with both metal seal and Oring seal. (In case of Oring seal, Orings available in the market can be used.) Optional HSPDC Cuplas are available for diecasting machine applications with severe pressure variation. The overall length of male thread type is shorter than that of female thread type plus conversion nipple available in the market.
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: round Material: 42CrMoS4 (1.7227) Method of production: cold drawn, peeled Surface finish: mill-finish Condition: quenched and tempered Standard: EN 10277/EN 10278 Tolerance: h9 eClass 9.1: 35010312 UNSPSC 11.2: 30102404 Dimensions: Diameter (mm): 10 - 100 Length (mm): 3,000 - 6,000
Request for a quoteC. AUGUST HÜCHELBACH GMBH & CO. KG
Germany
Quenching und tempering of tool steels primarily for the saw- and knive industry. Many reputable saw- and tool companies are taking advantage of our highly developed heat treatment service which is well known in several countries arround the world.
Request for a quoteResults for
Quenched steel - Import exportNumber of results
14 ProductsCountries