Quality - Import export

The angular beaker, available in three different sizes, is particularly flexible and enables precise sampling. The position of the beaker can be set at different angles so that samples can be taken from different depths and surface conditions, even from areas that are difficult to access. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open water etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

Best Quality Of Purity 99.97%-99.99% Copper Cathode At Low Prices

Particular Challenges of the Application: By tactile equipment, determination of the deepest point on a rough metal surface is neither simple or precise. As a consequence, often either too much material is removed, or the surface is still covered with defects which have to be eliminated by a following milling cycle. The equipment is arranged in parallel, so that the complete width of the slabs is covered. The sensors are calibrated to a common coordinate system and mounted on a movable gantry. Before measurement, the slabs are fixed in place. The scanners mounted on the gantry are guided over the measuring object, driven by an electric motor. The point cloud recorded by the four scanners is consolidated in a PC by means of the QuellTech image processing software which calculates the difference between highest and lowest point of the corresponding surface and compensates for possible inclination of the slab (detrending).

Particular Challenges: In the course of the production, endless cables are running at a considerable speed, and supervision has to be carried out nearly under real-time conditions. The size of the objects to be determined, i.e. of the flaws to be discovered, is in the range of only some hundredths of a mm. Another difficulty is the fact that surfaces with very different reflectivity and roughness are involved. In order to be able to check the cables all around, several laser scanners must be in place, mounted at different angles, thus covering the entire range of 360°. Quelltech Solution: The solution consists in a configuration of four Q6 laser scanners, mutually displaced by 90°, so the entire surface of the cables is in the field of view. On the basis of the 100% inline inspection, the position of defects can precisely be determined, without losing too much time.

Pendulum beaker made of polypropylene with graduation and spout available in three sizes. The beaker automatically swings into the horizontal position. This prevents spillages. Also suitable for deep and narrow shafts (Ø 150 mm). Particularly suitable for sampling from basins, tanks, shafts, open water etc. Sampling depths of up to 6 m can be achieved with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

Aral HighTronic J is a modern low-ash smooth-running engine oil in Aral Synth technology. Can be used for petrol and diesel engines (especially with diesel particulate filter DPF) where a product according to ACEA C2, API SN (or earlier) or Peugeot PSA Approval B71 2290 is required. The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C2 PSA Approval B71 2290

Incremental length probe with magnetic detection principle for high reliability. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines

To make a sampling procedure reproducible, it should always be carried out under the same conditions. For this purpose, the depth stop for samplers is a helpful accessory. The depth stop can be clamped to any height of the sampler by means of a C-clamping screw. This ensures that the sampler penetrates to the same desired depth each time it is pierced. The penetration depth is thus fixed and can be precisely recorded, e.g. in a test report or sampling instructions. In addition, the depth stop can prevent accidental puncturing during sampling. The depth stop for samplers is useful in all areas where the sampling parameters must be precisely determined and defined, e.g. in the outgoing and incoming goods inspection of bulk materials that can segregate. Simply attach the depth stop for samplers to a sampling tube with Ø 25 or 50 mm and tighten with an Allen key (5 mm).

thicknessGAUGE sensor systems are used for precise thickness measurements of strip materials, plates and sheets up to 50 mm. Several models with different sensor types, measuring ranges and measuring widths enable inline thickness measurements of different materials and surfaces based on an unmatched price/performance ratio. This fully assembled system comprises a stable frame on which two optical distance sensors are fixed, which detect the thickness of the measuring object according to the difference principle. The sensors are perfectly aligned to each other in terms of their mounting condition. Furthermore, thickness calibration at the factory enables high precision thickness measurements.

The surface net with flat net is ideal for sampling and collecting solids and organisms from the water surface. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open waters, etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

The SteriPlast® sample spoon made of polystyrene is produced in our clean room of class 7 (10,000), individually packaged for disposable use and then sterilised by gamma rays. The sample spoon is available in two sizes, 2.5 ml (similar to a teaspoon) and 10 ml (similar to a tablespoon), and is ideal for sampling powders, granulates and fluids.

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements

System for spray quality monitoring a multitude of spray nozzles e.g. for agricultural sprayers

Radar Sensor measuring Spray quality signature for industrial applications

All-layer sampler, with open inner tube, no separate chambers, and large sampling volume. For all-layer samples through all the layers of the sample.

Our special solution for labeling fresh, moist or greasy food: Manufactured from a material approved for food. Water and grease resistant properties and printable in thermal transfer process. Suiting your needs we realize your individual label in true Bizerba quality. Bizerba labels for direct food contact safely and reliably fulfil their function: Our ISEGA-tested solution can be safely applied to your fresh, moist or even greasy food. Bizerba offers you various solutions: For multicolored preprints, paper or film labels with a permanent, special acrylate-based adhesive can be used. Another alternative with particularly resistant properties is our polyethylene film-based synthetic paper label. It combines the print quality of coated paper with the robustness of a high performance film: The label is tearproof and resistant against water, grease and chemicals.

The SteriPlast® food scoop, made of blue polystyrene, is produced and assembled in our class 7 clean room (10,000, except for the 1000 ml scoop), individually packaged for disposable use and then sterilised by gamma rays. The food scoop is ideal for powders, granulates and pastes. The shade of blue that is used does not occur in a natural form in foodstuffs. Because of this, blue products or parts of them can be quickly found and easily identified in a visual check if they are ever mixed into production. The use of blue tools thus helps to meet the requirements of the HACCP hazard analysis and assessment in reference to foreign objects. This is an important criterion, especially in food processing and production and in the animal feed and pharmaceutical industry.

ProfiSampler PP for general samples, for weak acids, alkalis, detergents, chemical baths. Made of solid, chemical resistant Polypopylene. ProfiSampler PP, consisting of: Vacuum pump, made of solid PP, with feet, venting valve and bottle thread GL 40, 1 PP bottle 250 ml, 10 m PE suction hose (roll), 1 hose cutter, 1 stainless steel hose weight made of AISI 304 (1.4301), 20 seal-it bottle seals. While the MiniSampler is designed for laboratory use, the ProfiSampler has been specially developed for rough industrial use.

The core sampler QuickPicker is particularly suitable in the event that bulk goods are taken directly from sacks or bags and have to be filled into the original sampling bottle directly. QuickPicker is uncomplicated in its use and cleaning. No undercuts or edges mean no sample residues which could falsify subsequent samples. It is therefore ideal for quality control. The sampler QuickPicker is delivered complete with two 250 ml PE sample bottles and with a cleaning brush.

Incremental length probe with magnetic detection principle. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines

CIC will be happy to support you in planning, securing, controlling, monitoring and optimizing your quality management, e.g. with: advanced quality planning supplier quality purchased part quality component qualification product engineering Supplier Audit Internal audits Process monitoring and process optimization Production control and monitoring at the supplier bottleneck coordination production readiness tool design Tool tracking mold trials Gauge concepts and gauge acceptance component measurements Resident Engineering Task Force Abbreviations such as APQP, PEP, FMEA, PPAP, 8-D, 5Why are not foreign words for us but common tools.

Pendulum cup made of stainless steel V2A (1.4301) with extra-long, closed handle. The sample cup has no openings or undercuts up to an immersion depth of approx. 500 mm. The closed design of the shaft makes the scoop cup particularly suitable for sampling well water, sludge, waste water, liquid manure or similar. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open bodies of water, etc. With the length-adjustable telescopic aluminium rods, sampling depths of up to 6 m can be achieved. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

The LaboPlast® disposable spatula made of polystyrene is produced and assembled in our clean room of class 7 (10,000) and individually packaged for disposable use. As a result of the long, ergonomically-shaped, stable handle and a sharp blade, it is possible to even penetrate directly into containers such as paper or plastic sacks. The disposable spatula is ideal for sampling powders, granulates and pastes. The spatula with transparent sealing sleeve can be closed again immediately after sampling and the exclusion of contamination can be safeguarded for the sample taken.

With the bottle holder, the sample can be taken directly into the sample bottle. An easy-to-use clamping strap holds all bottles or other containers up to 88 mm Ø. Plastic, glass or metal bottles can be filled easily and safely without having to decant the sample for transport or storage. The position of the bottle holder can be set at different angles so that samples can be taken from different depths and surface textures, even from areas that are difficult to access. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open bodies of water, etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods.

We offer potassium metabisulphite / potassium disulphite In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

Wound filter-cartridges Type: PP, PPW (washed) Wound filter-cartridges are depth-filter-elements, produced in a special way of winding. Newest winding-machines guarantee a constant and high quality for filter-cartridges up to 60”. The PPW filter-element is wound with a special washed yarn. Washed yarn is free of wetting agents and prevents foaming.

Sterilisable pendulum beaker made of stainless steel V2A (1.4301) for industry and water treatment. Beaker with scraping edge, capacity 1000 ml. Ideal for powders, granulates, pastes and slurries. Particularly suitable for sampling from basins, tanks, shafts, open water etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

The depth catch net with large net is ideal for sampling solids and organisms below the water surface. The sampler is particularly suitable for sampling from basins, tanks, shafts, open waters, etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

Multi sampler with several closed chambers, for multi point sampling from several predetermined sampling depths. Bürkle zone samplers are used for taking samples of bulk goods of any kind. The big advantage of zone samplers is that all-layer samples can be collected from all layers of the container. Various bulk goods can be collected with the lances, from the finest powder to large grains such as corn or nuts. The zone samplers are available in different lengths. 55 cm (only Multi, Uno and All-layer sampler) especially suitable for sacks, 85 cm long (especially for barrels, tubs, mixed containers) and 150 cm as well as 250 cm (only Jumbo sampler) for big bags, silos, tanks. Safe and reliable sampling is made even easier with useful special accessories such as sealing sleeves, Quali-Paper, cleaning brushes, emptying devices and close-it control seals. The zone samplers are available in different models for different sampling tasks.