Protective tubes - Import export

Rain protection set 12256 consisting of an extension made of PVC and a black protective cap made of soft PVC for the floor sockets 7501A, 7601A, 7602A, 7604A and 7701AW. The rain protection set offers ideal protection against rain with plugged-in connections. Use: Proper installation and proper use is required. The seals must be cleaned of dirt regularly and the products must be checked to ensure they are in perfect condition.

Heat protection tubes are made by layering several kinds of aluminum alloy foil and other materials, such as fiberglass and plastic with corrugations. The excellent reflectivity of the aluminum alloy on the external surface reflects radiant heat, and its insulating power additionally serves to protect the aluminum flexible tube’s content from heat sources. These products have great flexibility but high dimensional stability, and they can be compressed or extended as required. They can also be fastened or mounted easily by crimping the end fittings.

PMA cable protection systems are used wherever the mechanical protection of electrical lines and cables is needed. Highly flexible cable protection tubes are specifically suited for the additional protection of cable guides in e-chain® systems. Due to the combination of technical knowhow and the strictest international safety guidelines, PMA fulfils the worldwide requirements of industrial markets in application areas like mechanical engineering, automotive construction, fiber optics, solar systems as well as applications in the robot sector with high speeds and millions of alternate bending cycles.

Other information Series R48 Inner height hi: 25 mm Inner widths Bi: 25 - 130 mm bending radii R: 60 - 250 mm Pitch: 30,3 mm E-Tube, snap-open along the outer radius Series R58 Inner height hi: 35 mm Inner widths Bi: 50 - 200 mm bending radii R: 75 - 250 mm Pitch: 33,3 mm E-Tube, snap-open along the outer radius Series R68 Inner height hi: 45 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 36 mm E-Tube, snap-open along the outer radius iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request Other information Series R48 Inner height hi: 25 mm Inner widths Bi: 25 - 130 mm bending radii R: 60 - 250 mm Pitch: 30,3 mm E-Tube, snap-open along the outer radius Series R58 Inner height hi: 35 mm Inner widths Bi: 50 - 200 mm bending radii R: 75 - 250 mm Pitch: 33,3 mm E-Tube, snap-open along the outer radius Series R68 Inner height hi: 45 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 36 mm E-Tube, snap-open along the outer radius E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E2 R100 and E2 R Small pitch for silent operation Protection for cables and tubes against chips (even hot chips) Rugged and tight Space-saving with good ratio of inner to outer dimensions Modular interior separation options Small pitch for low-noise, silent operation Very small radii possible through small pitch Smooth, chip-repellant exterior contour Removable lid for shortening the installation time Double stop dog system for longer unsupported lengths KMA mounting brackets with potential for "all-round" fastening Typical industrial sectors and applications Materials handling Construction machinery Machine tools Timber Processing Machines Long travels in many industrial sectors Semiconductor ESD versions Theater and entertaining industry Vehicles General mechanical engineering etc. In all areas exposed to dirt and chips iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request

QuickFit Protection Basket Our protection baskets are valuable accessories: they protect against collisions, give additional protection against dust and are an optical enhancement. Like the heaters themselves, they are manufactured in high-grade steel, so that we offer a logical solution regarding both quality of material and optical general impression. QuickFit: You fix our baskets without any further tools or drillholes! Just put the basket over the already mounted RiRo and wedge it, ready!

corrugated pipe (PE - LD) slotted material:PE - LD working temperature: - 40°C up to +70°C temporary up to +90°C melting point:+100°C up to +110°C resistance:acid, base, anorganic salts, ... Category Electrical equippment for vehicles / Cable protection tubes / Corrugated tube from polyethylene / Black/ slotted Product number supplier 662160

corrugated pipe (PE - LD) slotted material:PE - LD working temperature: - 40°C up to +70°C temporary up to +90°C melting point:+100°C up to +110°C resistance:acid, base, anorganic salts, ... Category Electrical equippment for vehicles / Cable protection tubes / Corrugated tube from polyethylene / Black/ slotted Product number supplier 662160

corrugated pipe (PE - LD) material:PE - LD working temperature: - 40°C up to +70°C temporary up to +90°C melting point:+100°C up to +110°C resistance:acid, base, anorganic salts, water, fat Category Electrical equippment for vehicles / Cable protection tubes / Corrugated tube from polyethylene / Black Product number supplier 662137

corrugated pipe (PE - LD) material:PE - LD working temperature: - 40°C up to +70°C temporary up to +90°C melting point:+100°C up to +110°C resistance:acid, base, anorganic salts, water, fat Category Electrical equippment for vehicles / Cable protection tubes / Corrugated tube from polyethylene / Black Product number supplier 662137

CEE floor tank 6523Q with a stainless steel housing. The lid closes watertight, protection class IP 65, and has an internal tube for using the tank when the lid is closed. Degree of protection with tube: IP21. Further configuration variants on request.

Closed pneumatic-mechanical switching system The sewage-resistant pressure bellows and the end membrane are connected via a pneumatic line routed in a protective tube. There is a plastic housing on the collecting tank of the sewage pumping station which contains 4 easily accessible micro-switches In addition, there is a manometer for continual filling level display located in the housing

Heat protection sleeves and mats extend our expertise in protective aluminum flexible tubing to other shapes and uses. Layers of aluminum foil are combined with fiberglass for products that can withstand temperatures up to 750°C.

By creating specialized aluminum alloys, pioneering new treatments and combining aluminum components with other materials such as paper, plastic and fiberglass, Novelis has become the global quality leader for the transportation manufacturing industry. We have created a range of transportation manufacturing products that provide insulation against heat, sound and gases, high strength so components remain effective under pressure, and superior flexibility for a full range of designs and implementations. Key Novelis aluminum components include heat exchangers, heat protection mats and sleeves, energy absorption elements, hoses, silencers and flexible tubes, including heat protection tubes, air ducts and exhaust pipes. Novelis is a leading supplier of light-gauge, narrow-slit aluminum fin stock (bare and clad) and brazing sheet used in the production of heat exchangers.

Universal expansion joints absorb axial, lateral and angular movement simultaneously. Installation is primarily in the low pressure area. Using a guide tube protects the metal bellows from abrasive media or flow-induced oscillations. The reaction forces caused by the internal pressure must be absorbed by sufficiently dimensioned anchor points.

The COMPENSER® of the CE-series is a nonreversible maintenancefree shock reducing element / shock absorber which can be used for emergency use, for example as a fall protection. If necessary, several deformation tubes (so-called crash element) can be installed in parallel as end stops. Design & Function: The crash element is attached to the support structure using the flange 3. In the event of an impact, the stamp (acting as a mandrel) 1 enters the deformation tube 2 and expands it. Applications: Automated storage and retrieval system | Conveyor system | Storage technology | Automation | Heavy duty | Heavy equipment | Engineering | Crashtest | Flight simulator | Special construction | Special machines | Actuator | Test device | Small parts warehouse | High-bay warehouse | STC | HRL | Storage and retrieval systems (AS/RS) equipment | non reversible | Leakage-free | Shuttle

High performance, compact dimensions, low weight - everything fits with the Lutz B6. The pump shaft is protected by a shaft guide tube against possible "attack" of the pumped medium. Perfectly suited for pumping and draining of neutral and aggressive liquids with low solids content. * on request also available in special immersion depths of 1000 - 3000 mm * Design according to the single pipe principle * Application examples: For conveying and circulating chemicals and solutions in surface treatment, chemical industry and water treatment, etc. Features & Advantages * Wide range of applications * No risk of leakage at the bottom outlet due to safe product removal * Low wear * Stationary installation possible via flange * Also for small container openings

The Dexnyl PEEK shrink tube provides a protective layer for sensitive or critical components as an alternative to traditional materials. PEEK shrink tubes are particularly effective in environments where extreme heat or cold, high pressure, or chemicals, water, or dielectric interference endangers wires and electrical components. BIEGLO can offer PEEK shrink tubing with a diameter of 0.965mm to 9.957mm. PEEK is a thermoplastic polymer that is commonly used instead of metal or other types of plastics. PEEK has a temperature resistance of up to 240 ° C and a special resistance to chemicals.

The separable plastic immersion probe LMK 858 was designed for level measurement in aggressive media, desalination plants and for use in more viscous media such as sludge. Since the area of application is often outside a building, great emphasis was placed on high surge / lightning protection. The immersion probe is based on an extremely robust and precise pressure sensor, the membrane of which consists of a high-purity ceramic. Another special feature of the LMK 858 is the separability of the probe head and cable part. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 45 mm — chemical resistance — housing PP-HT — integrated lightning protection and increased overvoltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — cable protection — diaphragm pure ceramic (99.9 % AI2O3)

The separable plastic probe is designed for level measurement of water, waste water as well as fuels and oils. Basic element is a piezoresistive stainless steel sensor. Since the area of application is often outside a building, great emphasis was placed on overvoltage / lightning protection. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembl with a connector and can be changed easily. Features: — nominal pressure: 0 ... 1 mH2O up to 0 ... 100 mH2O — accuracy: 0,35 % (opt. 0,25 %) FSO — diameter 35 mm — cable and sensor section separable — small thermal effect — integrated lightning protection and increased overvoltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — SIL 2 (safety integrity level) according to IEC 61508 / 61511 — different cable and elastomeres — customer specific versions

The CS-3000 suspension system is characterised by a combination of well thought-out ergonomics and modern industrial design. It consists of a large number of components that can be combined in any way. The CS-3000 suspension system is an innovative system solution that functions according to the modular principle. — Long service life and safe operation thanks to anodised aluminium tubes — Clean lines, thanks to smooth transitions between the tube and system components (very easy to clean) — Coated tube fastening screws for sealing the thread holes and secure connections — Relative appearance and connection of narrow profiles thanks to the possibility of reducing the cross section from square to round tube — Protection class IP65 — Modular flexible system lets you upgrade the couplings (also after installation), e.g. with adapters for slim enclosures or with tilt adapters — Well designed ergonomics for simple and virtually fatigue free operation

Optical features Indicator type standard Electrical features Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Lens typ round Lens size 10 mm Bezel typ Prominent bezel Screw thread size M14 Bezel material Metal Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 2 IP Code IP67 Max. panel thickness 11 mm Thermal features Operating temperature -20...+60 °C Storage temperature -25...+80 °C Norms & Standards UL listed Yes VDE certified Yes

Optical features Indicator type standard Electrical features Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Lens typ round Lens size 5 mm Bezel typ Prominent bezel Screw thread size M8 Bezel material Metal Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 2 IP Code IP67 Max. panel thickness 5,5 mm Thermal features Operating temperature -20...+60 °C Storage temperature -25...+80 °C Norms & Standards UL listed Yes VDE certified Yes

Description Manufacturer CML Technologies GmbH & Co. KG Optical features Indicator type standard Electrical features Voltage type AC Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Lens typ Flat Lens size 16 mm Lens surface diffused Mounting type With bezel Bezel typ Superflat bezel Screw thread size M22 Bezel material plastic Bezel color black Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 3 IP Code IP67 Max. panel thickness 8,5 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified Yes Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Optical features Indicator type standard Electrical features Voltage type AC Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Lens typ round Lens size 16 mm Lens surface diffused Mounting type With bezel Bezel typ Prominent bezel Screw thread size M22 Bezel material plastic Bezel color black Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 3 IP Code IP67 Max. panel thickness 8,5 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified Yes Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Optical features Indicator type standard Electrical features Voltage type AC Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Lens typ round Lens size 16 mm Lens surface diffused Mounting type With bezel Bezel typ Prominent bezel Screw thread size M22 Bezel material Metal Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 3 IP Code IP67 Max. panel thickness 8,5 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified Yes Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Electrical features Voltage type AC Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Lens typ Flat Lens size 10 mm Mounting type With bezel Bezel typ Superflat bezel Screw thread size M19 Bezel material Metal Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 2 IP Code IP67 Max. panel thickness 11 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified No Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Electrical features Voltage type AC Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Lens typ round Lens size 10 mm Mounting type With bezel Bezel typ Prominent bezel Screw thread size M19 Bezel material Metal Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 2 IP Code IP67 Max. panel thickness 11 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified No Miscellaneous Connectors for lamp test No

Optical features Indicator type Standard Electrical features Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Lens typ Flat Lens size 10 mm Bezel typ Flat bezel Screw thread size M16 Bezel material Plastic Bezel color Black Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 2 IP Code IP67 Max. panel thickness 11 mm Thermal features Operating temperature -20...+60 °C Storage temperature -25...+80 °C Norms & Standards UL listed Yes VDE certified Yes