Protective magnets - Import export

Our rubber caps are used as scratch protection especially on delicate surfaces. They can be used with our flat pot and decoration magnets in order to protect the surface. Moreover it lowers the noise when putting on the magnet.

Our rubber caps are used as scratch protection especially on delicate surfaces. They can be used with our flat pot and decoration magnets in order to protect the surface. Moreover it lowers the noise when putting on the magnet.

Magnetic system with stainless steel body and strong neodymium magnet core. This series have a deeper magnetic force than the classic flat pot systems. Two milled surfaces on the perimeter allow to fix the system with a tool. The holding surface is over molded with a hard type of rubber (TPE) and protects the magnet from strikes. At the same time the rubber effects a noise absorption.

Extremely strong neodymium magnets Secure hold even under extreme loads Optional rain protection flap With additional magnetic stripe Available in many colours

Fieldbus Profile AG03/1 Fieldbus: Space-saving, easy mounting Through hollow shafts up to max. ø14 mm Brushless 50 W, 24 V EC motor with long service life Integrated power and control electronics with inverse polarity and overload protection Integrated magnetic absolute position encoder on the output shaft Integrated CANopen or Profibus-DP with M12 component mounting technology Integrated RS458/SIKONETZ5 interface with M8 component mounting technology

We realize magnetic connectors including cable assembly for all sectors and industries. On request, we also take over the construction and development. Depending on the material and internal structure of the spring contact probe, currents up to 15A per pin are possible. The magnetic force can be customized using different magnets. Protection classes up to IPx7 are possible for demanding installation situations. Please contact us if you are interested in a magnetic connection solution. For an initial evaluation of your request, a first sketch, the desired specifications, as well as the planned annual volume and duration is sufficie

Following standard colours are available ex stock » transparent: blue, yellow, green, orange, red, black, nature » completely coloured: blue, yellow, green, orange, red, black, white » no nickel – no allergy » attractive design » grip edge for easy detachment » magnets are protected and do not break (possible in case of raw magnets) » usable on both sides (for example for paperclips, pens, scissors) » top / bottom colour mix Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » higher holding force

The bar magnets are workable on both sides. On the holding surface an individual shape is possible and the adhesive force is adjustable. Bar magnets with an area for a free machining on the adhesive surface moreover offer a better wear protection compared with other bar magnets. Alternative to the standard we also offer individual solutions: » Stainless steel housing + pole shoes » Greater holding power » Greater temperature until 280 °C

The new poster stand WindSign "Madera" is made of a 40mm wide beech wood frame and is equipped with lacquered chards boards on both sides and is therefore suitable for various industries. The pavement sign "Madera" is equipped with a double-sided magnetic chalk board. The board area of ​​590 x 780 mm can be labeled on both sides with chalk markers / illumigraphes and then wiped off again. The protection of your advertising message can be ensured by the optionally available magnetic protective film. Furthermore, printed posters can be attached directly to the blackboard by means of magnets. The beech wood coated with high-quality, weather-resistant protective lacquer makes this stand suitable for both indoor and outdoor use. To avoid falling over the customer stoppers, the movable pedestal is filled with water or sand and can then still be easily moved by tilting. The spring technology allows a secure stability in wind and weather.

The magnet assembly can be clipped into the groove. It is freely movable or can be fixed by a threaded pin. The magnetic core is protected by a plastic cover and has a large magnet area in the groove. The magnetic system is lying nearly plan and has a closed, smooth adhesive surface which avoids scratches on the surface and the concentration of metal shavings. Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Temperature resistance up to 150°C

Privacy filter with magnetic attachment. Prevents others from reading your screen from the side and protects against dirt. Including bag and microfibre cloth. • Magnetic privacy filter for 14.0” screens • Limited viewing angle of 60 degrees protects sensitive data • Idea for use in public • Incl. sleeve for storage • Matt surface and reduced blue light protect your eyes while working • Practical attachment via two neodymium magnets • Protects the screen against scratches and dirt • Can also be used on touchscreens • Incl. microfibre cloth to clean screen and filter • Compatible with screens measuring 310 mm x 174 mm (W x H) / 12.2“ x 6.9“ (W x H)

FX-R is the series for round material handling. The deep shallow-angled prism ensures safe positioning on the load and guides the magnetic field deep into the material. The magnet system can be switched well in the entire diameter bandwidth and does not recoil, shearing of the load due to twisting is prevented by the overlapping prism. Flat material, even with low material thickness, is no problem for the FX-R. With hot workpieces, the deep prism protects the magnet core from overheating. The lifting magnet for shafts and bars.

The rubber coated pot magnet is made of small neodymium disc magnets, steel plate, and rubber. These disc magnets are embedded in the steel plate, and then the whole steel plate is coated with rubber. The steel plate well concentrate and enlarge the magnetism of these magnet discs. The rubber which covers the magnets and steel plate protects the magnet from corrosion and also well protect the delicate objects that contact pot magnet from scratch. For the Black Rubber coated pot magnet,Also could be classified as threeRubber Covered Neodymium Pot Magnet with External Threaded Stem,Rubber Covered Neodymium Pot Magnet with internal Threaded hole which is protruded, and Rubber Covered Neodymium Pot Magnet with internal Threaded hole which is no protruded.It consists of iron plus strong Neodymium magnet and Black Rubber.

Strong Neodymium Rectangular Pot Magnets with Countersunk Hole Magnets The neodymium pot magnet holder magnet is made of a super strong neodymium magnet encased inside a chrome plated steel cup. The neodymium magnet is bonded inside of the cup with adhesives. At the same time, the steel cup also protects the magnet from being damaged when frequently used. The counter sunk hole on the magnet is provided for easy applications.

Mini prisms RSMP190 and RSMP290 rotatable and swivellable through 360° with prisms in 12.7 and 17.5 mm RSMP190 and RSMP290 sticks quickly and easily even to difficult surfaces, e.g. glass and marble façades, historic buildings, gas and oil pipelines, etc. or can be attached using plugs and screws. For easy installation on steel structures, a magnetic version of the base plates is also available. The following accessories are available for this product (see right): Resumption points (item RSFP-X90) Magnetic or non-magnetic protective cap (RSPC10 and RSPC10M) When using tachymeters and robotic total stations the prism can always be aligned accurately with the measuring instrument the prism can be turned in a radius of 360°, making it possible to use the same survey point from different directions bridges, façades and many other structures can be monitored even more quickly and precisely When using robotic total stations permanent settlement measurements can be carried out during cons

RS193 housing with 30 x 30 mm reflective target rotatable and swivellable through 360°! RS193 sticks quickly and easily even to difficult surfaces, e.g. glass and marble façades, historic buildings, steel girders, gas and oil pipelines, etc. or can be attached using plugs and screws. For easy installation on steel structures, a magnetic version of the base plates is also available. The following accessories are available for this product (see right): Resumption points (item RSFP-X90) Magnetic or non-magnetic protective cap (RSPC10 and RSPC10M) When using tachymeters and robotic total stations the reflective target can always be aligned accurately with the measuring instrument the reflective target can be turned in a radius of 360° making it possible to use the same survey point from all directions when using fixed point RSFP-X90, the targets can be removed and later replaced on the same survey point when using protective cap RSPC10 and RSPC10M, the reflective targets can be protec