Printing components - Import export

Additive manufacturing processes are a great alternative to classical processing techniques and aim at a constructionally optimized and cost-effective production of components. 3D printing now includes a variety of technologies that can be used in different 3D printer versions. ViscoTec uses established dosing systems with the endless piston principle specifically for 3D printing of viscous fluids and pastes. And it creates new possibilities for printing 1-component viscous fluids and pastes.

Epoxy fibre-glass FR4 1.50 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) with solder stop mask Component print PCB for machine assembly (Pick & Place) of Fine-Pitch QFP 256 QFP 256 4 x Size 100 x 140 mm

Epoxy fibre-glass FR4 1.50 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) with solder stop mask Component print PCB for solder practices for SMD Fine-Pitch QFP 208 QFP 208 4 x For manual soldering and very suitable for machine assembly (Pick & Place) Size 100 x 140 mm

• Optimum handling by compact design • Very low consumption • For difficult to access operations • Small and powerful • No power supply necessary, as driven pneumatically • Maintenance-free • For cleaning injection molds, devices, small components, printed circuit boards, ...

Extender card for 19"-systems DIN 41612 C64 a+c Epoxy fibre-glass FR4 1.50 mm Single-sided 70 µm CU Solder stop mask Component print Microswitches soldered with two measuring posts for each continuous strip Signalling line pin 2 - 31 Large signalling line pin 1 + 32 Switching voltage 10 mV - 60 V Switching current 0.3 A at 24 V Rest current at 20° C max. 6 A Contact resistance 30 mOhm Extender card: 100% electronically tested Size 100.00 x 278.70 mm (132.50 x 330.70 mm with handle)

Extender card for 19"-systems DIN 41612 C64 a+c Epoxy fibre-glass FR4 1.50 mm Single-sided 70 µm Cu Solder stop mask Component print Removable short-circuit bridges and two measuring posts for each continuous strip Signalling line pin 2 - 31 Large signalling line pin 1 + 32 Switching voltage 10 mV - 60 V Switching current 0.5 A at 24 V Rest current at 20° C max. 2 A Contact resistance 20 mOhm Extender card: 100% electronically tested Size 100.00 x 278.70 mm (132.50 x 330.70 mm with handle)

Epoxy fibre-glass FR4 1.50 mm Single-sided 35 µm CU Without holes Hot air leveling (HAL-leadfree) with solder stop mask Component print PCB for 85 solder practices for SMD standard, fine pitch, and discrete components: version quantity PLCC 52, 68, 20 QFP 44, 84, 132, 184 sq. SOT23 3 x SOT89 2 x SOT143 1 x SOT233 1 x SO14 1 x SOM16 1 x SOL20 1 x Poti. 1 x DPAK 1 x Al. Kond. 6.30 mm 1 x Al. Kond. 4.00 mm 1 x Melf 2308 2 x Mini Melf 1206 6 x Tantal Chip Kond. A 1 Tantal Chip Kond. B 1 Tantal Chip Kond. C 1 Tantal Chip Kond. D 1 0402 Chip Kond. 10 x 0603 Chip Kond. 10 x 1206 Chip Kond. 10 x 0805 Chip Kond. 10 x 1210 Chip Kond. 7 x 2220 Chip Kond. 1 x 1812 Chip Kond 2 x TSOP32 1 x 5020 Schwingquarz 1 x Also very suitable for machine assembly (Pick and Place) Size 100 x 140 mm

Epoxy fibre-glass FR4 1.50 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) with solder stop mask Component print PCB for 57 solder practices for implementation into the SMD surface mounted device: version quantity PLCC 20, 68 QFP 84 sq. TSOP32 1 x SO14 1 x SOM16 1 x SOL20 1 x SOT23 3 x SOT143 1 x SOT89 2 x SOT233 1 x DPAK 1 x Poti. 1 x Tantal Chip Kond. A 1 x Tantal Chip Kond. B 1 x Tantal Chip Kond. C 1 x Tantal Chip Kond. D 1 x 1206 Chip Kond. 10 x 0805 Chip Kond. 10 x 1210 Chip Kond. 6 x 1812 Chip Kond. 2 x 2220 Chip Kond. 1 x 2308 Melf 2 x 1206 Mini Melf 6 x Suitable for Pick & Place PCB for 57 solder practices for implementation into the SMD surface mounted device: version quantity PLCC 20, 68 QFP 84 sq. TSOP32 1 x SO14 1 x SOM16 1 x SOL20 1 x SOT23 3 x SOT143 1 x SOT89 2 x SOT233 1 x DPAK 1 x Poti. 1 x Tantal Chip Kond. A 1 x Tantal Chip Kond. B 1 x Tantal Chip Kond. C 1 x Tantal Chip Kond. D 1 x 1206 Chip Kond. 10 x 0805 Chip Kond. 10 x 1210 Chip...

Laboratory board for Arduino applications Epoxy glass hard fabric FR4 1.50 mm Two-sided 35 µm Cu Plated-through (PTH) Hot tinned (HAL lead free) Hole matrix field in 2.54er raster Bored Ø 1.10 mm Soldering islands 2.20 x 2.20 mm 4 Potential paths Placement print for the following components: 8-bit AVR micro controller ATmega328P Serial connection USB connection Size 100.00 x 160.00 mm

Welcome to EWOQE, your expert in 3D construction, design, and modeling! Our passion lies in creating high-precision and innovative 3D solutions that propel your projects forward. Our experienced team of engineers and designers collaborates closely with you to bring your visions to life. From concept to final modeling, we offer expertise and creativity every step of the way. Thanks to cutting-edge technologies and a deep understanding of additive manufacturing techniques, we can realize even the most complex geometries and unique designs. Whether you need prototypes for new products, want to optimize existing models, or design complex components, we are your reliable partner for all your 3D challenges. Trust our expertise and let us transform your ideas into reality together. Contact us today to learn more about our services in 3D construction, design, and modeling.

Discover EWOQE's comprehensive service offering in 3D printing for mechanical components and prototype construction! We provide a variety of advanced 3D printing techniques such as FDM, SLS, MJF, and SLA to meet your needs and produce high-precision components. Our experienced team assists in the development and manufacturing of prototypes as well as functional mechanical parts. Understanding the importance of quick iterations, we offer rapid turnaround times to shorten your development cycles and optimize your time-to-market. With our advanced 3D printing technologies, we can achieve complex geometries and fine details to ensure your components meet the highest quality standards. Whether you require prototypes for product development, individual pieces for specific applications, or series production, we have the solution for you. Depend on EWOQE as your trusted partner in 3D printing for mechanical components and prototype construction.

Our advanced manufacturing crafts highly precise, custom-engineered components for technical applications in small series. Precision in 3D Construction and Modeling: Expertise in precise 3D construction and modeling underpins the production of technical production parts in small series. Leveraging advanced 3D printing, we create components meeting high standards of accuracy and functionality. Diverse Material Portfolio for Technical Applications: From classic materials (PLA, PET-G, ASA, ABS) to specialized polymers and fiber composites, our varied material portfolio caters to specific needs of technical production parts. Optimized Manufacturing for Small Series: Our techniques ensure efficient, precise production for small series, balancing cost-effectiveness and quality for swift market entry.

Counting and marking the components of an open reel allows inventory management with maximum accuracy. The enormous advantage of printing on the cover t ape lies within the lack of necessity for more than one counting per reel. Never recount another reel. SMARTcount is a reliable, fast, easy to operate machine with high performance. SMARTcount is designed to code reels of SMD components to enable stores personnel to quickly and accurately gauge the quantity of product remaining on a reel. The machine is used to unwind a reel of components, then rewind it printing a component count onto the cover tape as it rewinds. Increase stock count accuracy with the elimination of manual counts Reduce material handling and machine changeover times Eliminate disruptions in daily production line operation

Intelligent Storage Management The ISM 500, JUKIs intelligent dynamic storage solution, has been developed to satisfy the storage needs of the most varied types of components. With the possibility to configure up to 640 different positions, the operator can insert 7″, 13″ and 15″ reels, JEDEC trays, SMT and THT tubes, screen printing frames and foils, THT components etc.

Speed Mounter JUKI’s FX 3 stands for ultra fast, precise placement of micro components on printed circuit boards. It is the perfect solution for companies wanting to process large volumes. Among the strong points of the FX 3 are short retooling times thanks to quick change feeder banks as well as minimal maintenance. The user friendly touchscreen interface plus the powerful optimisation software provide additional ease of use.

High Speed Compact Modular Mounter JUKI’s RX 6 is the perfect solution for companies in need of a wide variety of components and large printed circuit boards as well as having to depend on quick product changes while maintaining high quality. The high speed compact modular mounter is suitable both for small and large volumes. Due to the compact design of the machine featuring a width of only 1.25 metre the RX 6 displays a smart solution in the case of production floor space being an expense factor.

The traditional ALLFILM system of conventional medium and high voltage capacitors consists of aluminium foil and polypropylene, immersed completely in synthetic, flammable oil. Breakdowns in this kind of dielectric tend to result in permanent short circuits which take out the entire capacitor element, change the voltage conditions inside the capacitor and initiate a chain reaction of further failures of capacitor elements which will end up in the loss of the entire capacitor. In three-phase capacitors, this process is usually accompanied by the occurrence of phase asymmetries which may cause damage and catastrophic failure. In our MSD™ medium voltage capacitors, we are using the metallised polypropylene so well known from LV power factor correction. Instead of flat pack windings, our capacitance is formed by compact cylindrical windings, avoiding the mechanical stress at the edges of the ALLFILM flat packs.

The special kind of films and coating patterns used in our oil-filled E63-capacitors give them a high specific ratio of capacitance to volume and makes them extremely overvoltage proof. Very good self-healing characteristics and the integrated overpressure protection (" BAM ") ensure safe operation and controlled disconnection in the event of overload or failure at the end of operating life. Hence the E63s are interesting particularly for applications with high AC ripple currents, e.g. as smoothing or supporting capacitors in buffer storage circuits, in sensitive environment with high safety requirements. Note that the presence of an overpressure mechanism adds substantially to the self-inductance of the capacitor, and limits the surge current rating. If self-inductance and surge current are important issues, then our E50 or E53 ranges may be considered as a more adequate option.

The E62-3ph capacitors stand out by their high AC-voltage load capacity. They have been designed especially for heavy duty operation in extreme or sophisticated operating conditions, such as AC filtering and power factor correction in wind power and UPS applications, harmonic filtering in three-phase mains with high or unusual levels of harmonic distortion, a.m.o. Thanks to their construction, they have a very low series resistance and a small self-inductance. Our basic design principle - preferring short winding elements with comparably large diameters - as well as the use of wavecut technology in many models, serves for high rms and surge current strength. The three capacitor elements are connected in delta internally; the plant oil filling is environmentally friendly and serves for optimized heat dissipation and improved internal insulation.

In modern applications of power electronics, AC capacitors are among the most critical links in the chain of components when it comes to long operating life, safety and reliability of operation. Decades of proprietary ELECTRONICON experience in metallizing capacitor films and designing high-end capacitors have created our very own Know-How, for instance in special metallizing patterns, our SINECUT slitting technology and optimized winding geometries. This enables us to design AC capacitors with a high specific ratio of capacitance to volume, high AC-voltage load capacity and outstanding suitability for high rms and surge currents. The cylindrical capacitors of our universal AC/DC series "E62" are perfect for non-sinusoidal voltages and pulsed currents, e.g. as damping or commutation capacitors switched in parallel to a thyristor, or connected in series with a resistor (damping of undesirable voltage spikes during the switching of power semiconductors).

It works - even in your smaller DC links! A few years ago, our PK16TM pioneered the large-scale shift from batteries of electrolytic DC link capacitors to energy-efficient and highly reliable film capacitors which has become so common nowadays. The E61 range makes the benefits of this substitution available for DC links with smaller powers now. With their pin terminals, these capacitors can be integrated directly into your printed circuit board. The capacitors of the E61 series are optimized for high rms and surge currents. Along with their high specific ratio of capacitance to volume, they offer long-term stability and storability, as well as excellent self-healing without loss of capacitance. It is our advanced know-how in special capacitor film coating, combined with many decades of practical experience in designing and manufacturing capacitors, which have allowed us to develop this range with its numerous advantages over traditional electrolytic capacitors:

AC capacitors require a hermetical casing in order to operate safely and without processes of chemical corrosion. The latter would result in deterioration of metal coating, decrease of capacitance as well as rise of loss factor and – consequentially – failure of the capacitor. DC capacitors – even though less sensitive to humidity – may suffer from excessive operating conditions as well. Another serious issue is the operation in conditions of extreme heat, and there are situations where placement in a cooling liquid is the only way. Certain high voltage applications may require the immersion of all components in insulation oil, such as MIDEL. Quite a few cooling or insulation oils behave aggressively towards metallized polypropylene, causing swelling of the film and deterioration of the contact layers. They must therefore be kept away from the capacitor elements. In the past, mostly MKV capacitors (with oil-impregnated paper electrodes) had to be used in such situations.

E57 are designed to fit directly to the terminals of your IGBT. Our range comprises standard as well as custom-tailored solutions which can be adapted to the specific geometrical and electrical requirements of your application environment. Connection is made through low-inductance copper bars which may vary in number, size and position according to your specifications. The UL:V0 plastic case houses compact and stable cylindrical windings, connected in parallel for maximum current strength and lowest possible selfinductance; it is filled with polyurethane resin, covered by a layer of UL94:V0 compliant resin protecting the winding package from humidity. Our highly reliable SecuMet™ film guarantees secure self-healing properties even under the most demanding operating conditions. Some of our E57 capacitors can be operated at ambient temperatures up to 105°C and are therefore suitable for usage in automotive and other critical applications

Thanks to the special kind of films and coating patterns used in our E56/E59-capacitors, clever winding geometries and refined internal construction, they unite large capacitance, very small self-inductance and high surge current sustaining capability (up to 700kA) as well as the possibility of high rms currents (up to 750A). Instead of flat pack windings, our capacitance is formed by compact cylindrical windings, avoiding the mechanical stress and instabilities at the edges of flat packs. Special terminals allow for additional reduction of the self-inductance. At the same time, they are extremely overvoltage-proof. They are especially suited for buffer storage circuits of converters, filter circuits and such like. The capacitors are housed in aluminium or steel cases and filled with solid resin which makes them absolutely dry and leakage-proof. Their shape and dimensions can be adapted to the individual requirements of our customers.

E53 and E55 capacitors have a particularly low series resistance and high pulse strength. Using sophisticated metallizing patterns, our SINECUT slitting technology and clever winding geometries, they are especially suited for the damping of GTO thyristors and low-inductance buffer circuits with high rms currents. Along with their very good ratio of capacitance to volume, these components do also have very good self-healing characteristics without loss of capacitance. Their very low self-inductance makes them suitable for use in high-current applications with medium frequencies. The capacitors of the E53 product family are housed in flame-retardant plastic cans (V0) and filled with solid resin. Special care has been taken both in terms of design and conservative electrical rating to ensure reliable operation even under tough environmental conditions. Connection is usually made through robust axial terminals with internal thread.

The PK16™ capacitor can be universally used for the assembly of low inductance DC buffer circuits and DC filters; with its high energy density it can replace banks of series-connected electrolytic capacitors as well as large film capacitors in rectangular cases. The capacitance in a DC buffer circuit must be sufficiently sized to both handle and smoothen the occurring ripple currents. The traditional use of series-/parallel-connected electrolytic capacitors offered large capacitance at seemingly low cost, however the low cost per microfarad is countered by the very low current strengh, the high sensitivity to voltage and current surges, as well as a substantial risk of failures in the field, resulting in high maintenance cost. Our advanced know-how in special capacitor film coating and many years of practical experience in designing and manufacturing capacitors have allowed us to develop our PK16™ range with high capacitance density.

Our capacitors of the E12 and E33 series are universally-suited for lighting and motor applications as well as power factor correction and power electronics. Their winding element of self-healing polypropylene film is immersed in eco-friendly vegetable oil and designed for highest requirements regarding operational life and functional safety even at high operating temperatures and other extreme conditions such as high humidity. Connection is made through tab connectors. The hermetical aluminium can is provided with an integrated overpressure safety mechanism (break-action mechanism, " BAM ") that disconnects the capacitor irreversibly from the supply in the event of a failure. The E12/E33 ranges comply with the "Type B" classification under lighting standard IEC/EN61048 as well as with "Class P2" under motor capacitor standard IEC/EN 60252-1. Please mind our safety remarks on the use of lighting capacitors in critical environment.

The ENCODER machine series was specifically developed for integration in all kinds of automated systems. Variable control possibilities: For the EP series we offer three different electronic control possibilities. Variable installation positions: The ENCODER EP/1 models, equipped with a piston on the ink/ doctoring cup and adequate overhead control, guarantee all print positions. Fitted with the ENCODER aluminium stand, the ENCODER EP/1 have a free choice of positioning within 360° and the distance to the printing component can be additionally adjusted with a handwheel.

You want safety when it matters? The HERMA PA4 / PA6 (Print & Apply) is the ideal device for all users who require durable and hard industrial use and ensures smooth operation and reliable labeling. This print & apply system offers you versatile possibilities. Print resolutions of 200, 300 and 600 dpi ensure maximum readability of the printed image. Standard components from the HERMA modular system guarantee quick and accurate label dispensing. The devices can be positioned in any orientation and offer many options for integration into existing production lines.