Press button - Import export

Burette with Schellbach stripes type Schilling / Bürkle with original Bürkle dosing armature. A universal aid in the laboratory, electroplating industry, water treatment plants, for field analyses, etc. Precise dosing using the press button, exact fine titration with the micro-screw and precise discharge jet. Graduation according to Category B (Tolerances according to DIN EN ISO 385).

The titrating burette with splinter protection is a fast acting burette with Schellbach stripes based on Dr. Schilling's design with automatic zero point extraction and Bürkle dosing armature.The glass burette has a plastic sheathing which increases resistance to breaking and protects against splinters. The possibility of the burette breaking is much lower than with a conventional burette, and if it does break, there will be no dangerous splinters.The Bürkle dosing armature allows for precise dosing and exact fine titration with the press button or micro-screw and precise discharge through the discharge jet.

The classy design model is made of satin stainless steel. The soap dispenser is silver and available with viewing window. CLIVIA® MW 125 is freely refillable, the container holds up to 1.250 ml liquid soap. Press the button to withdraw the soap. Remark: Guarantee only if used with CLIVIA®-soap (due to tested viscosity).

The shapely design model is made of plastic. The soap dispenser has a viewing window. CLIVIA® MCB 120 is freely refillable, the container has a capacity of 1.200 ml. Supplied with 2 adapters for 1.000 ml bottles and 950 ml soap cartridges. Press the button to withdraw the soap. Remark: Guarantee only if used with CLIVIA®-soap (due to tested viscosity).

The shapely design model is made of plastic. There are three different versions available. The soap dispenser is available in white, with or without viewing window or as transparent model with white parts. CLIVIA® retro 80 is freely refillable, the container holds up to 800 ml soap. Press the button to withdraw the soap. Remark: Guarantee only if used with CLIVIA®-soap (due to tested viscosity).

The shapely design model is made of plastic. You can choose from two three versions. The soap dispenser is white with or without viewing window or transparent with white parts. CLIVIA® retro 35 is freely refillable, the container has a capacity of 350 ml. Press the button to withdraw the soap. Remark: Guarantee only if used with CLIVIA®-soap (due to tested viscosity).

The shapely design model is made of plastic. Depending on taste you can choose from three different versions. The soap dispenser is available as white, with or without viewing window or transparent model. CLIVIA® retro 35 is freely refillable, the container holds up to 350 ml soap. Press the button to withdraw the liquid soap. Remark: Guarantee only if used with CLIVIA®-soap (due to tested viscosity).

The shapely design model is made of plastic. You can choose from two different versions. The soap dispenser is white with viewing window or transparent with white parts. CLIVIA® retro 25 is freely refillable, the container has a capacity of 250 ml. Press the button to withdraw the soap. Remark: Guarantee only if used with CLIVIA®-soap (due to tested viscosity).

The shapely design model is made of plastic. You can choose from two three versions. The soap dispenser is white with or without viewing window or transparent with white parts. CLIVIA® retro 110 is freely refillable, the container has a capacity of 1100 ml. Press the button to withdraw the soap. Remark: Guarantee only if used with CLIVIA®-soap (due to tested viscosity).

The shapely design model is made of plastic. Depending on taste you can choose from three different versions. The soap dispenser is available as white, with or without viewing window or transparent model. CLIVIA® retro 110 is freely refillable, the container holds up to 1100 ml soap. Press the button to withdraw the liquid soap. Remark: Guarantee only if used with CLIVIA®-soap (due to tested viscosity).

The classy design model is made of varnished metal. The soap dispenser is white and available with viewing window. CLIVIA® MW 125 is freely refillable, the container holds up to 1.250 ml liquid soap. Press the button to withdraw the soap. Remark: Guarantee only if used with CLIVIA®-soap (due to tested viscosity).

The shapely design model is made of plastic. The soap dispenser offers a viewing window. CLIVIA® designo 100 is freely refillable, the container holds up to 1000 ml soap. Press the button withdraw the liquid soap. Remark: Guarantee only when used with CLIVIA®-soap (due to tested viscosity).

The shapely design model is made of plastic. The soap dispenser offers a viewing window. CLIVIA® designo 55 plus is freely refillable, the container has a capacity of 550 ml. Press the button withdraw the liquid soap. Redmark: Guarantee only if used with CLIVIA®-soap (due to tested viscosity).

The shapely design model is made of plastic and has a soft touch surface. This avoids finger prints on the surface. The soap dispenser is available in different colors and has a viewing window. CLIVIA® Colored-Edition 55 plus is freely refillable, the container holds up to 550 ml. Press the button for withdrawal of liquid soap. Remark: Guarantee only when used with CLIVIA®-soap (due to tested viscosity).

The shapely design model is made of plastic and has a soft touch surface. This avoids finger prints on the surface. The soap dispenser is available in different colors and has a viewing window. CLIVIA® Colored-Edition 55 plus is freely refillable, the container holds up to 550 ml. Press the button for withdrawal of liquid soap. Remark: Guarantee only when used with CLIVIA®-soap (due to tested viscosity).

The shapely design model is made of plastic and has a soft touch surface. This avoids finger prints on the surface. The soap dispenser is available in different colors and has a viewing window. CLIVIA® Colored-Edition 55 plus is freely refillable, the container holds up to 550 ml. Press the button for withdrawal of liquid soap. Remark: Guarantee only when used with CLIVIA®-soap (due to tested viscosity).

The shapely design model is made of plastic and has a soft touch surface. This avoids finger prints on the surface. The soap dispenser is available in different colors and has a viewing window. CLIVIA® Colored-Edition 55 plus is freely refillable, the container holds up to 550 ml. Press the button for withdrawal of liquid soap. Remark: Guarantee only when used with CLIVIA®-soap (due to tested viscosity).

The shapely design model is made of plastic and has a soft touch surface. This avoids finger prints on the surface. The soap dispenser is available in different colors and has a viewing window. CLIVIA® Colored-Edition 55 plus is freely refillable, the container holds up to 550 ml. Press the button for withdrawal of liquid soap. Remark: Guarantee only when used with CLIVIA®-soap (due to tested viscosity).

The shapely design model is made of plastic. The soap dispenser is available as transparent model with white parts. It is only suitable for corner mounting. CLIVIA® classic 55 is freely refillable, the container has a capacity of 550 ml. Press the button to withdraw the liquid soap. Remark: Guarantee only if used with CLIVIA®-soap (due to tested viscosity).

Mini eyewash station ideal for the lab, filling stations or all work places where aggressive substances are used. Eyes Fresh can be attached to any standard cold water tap. For normal use of the tap, just press the button and the function changes back from the eye wash (returns automatically to eyewash-function when the tap is closed). Can be fitted onto taps with M22x1, 1/2" or 3/8" outer thread. With sufficient water pressure provided, performance according to DIN EN 15154-2.

COMFORT DEHUMIDIFIER TTK 68 ETrendy technology with a smart look The TTK 68 E with its elegant green metallic look evidently focuses not only on design, upon first switch-on this comfort device also demonstrates that a full range of de luxe features can be affordable for everyone. One of many sophisticated extras: The air flap opens automatically when pressing the start button and closes upon switch-off in order to protect the air outlet from dirt. The device can be used in continuous operation, employing a hygrostat automatism or else whilst controlled by a timer switch. It comes with an extra mode for drying laundry and automatically indicates the necessity of filter cleaning or of emptying the condensation tank. The target humidity value is entered conveniently via real-value selection and shown directly on the innovative integral display, which is not only a true eyecatcher, but owing to this construction also particularly easy to clean.

The Powder Sampler Mini is a stainless steel sampler for small quantities. When the button is pressed, a sampling rod enters the sample material and retracts when released. In this way, a fixed amount of sample material is enclosed in the sample notch of the rod and removed. The sampler precisely collects 0.01 ml, 0.05 ml and 0.1 ml sample volumes, depending on the version. With an insertion depth of up to 300 mm, multiple target point samples can be collected at different depths. The small-volume powder sampler is made of high-quality stainless steel 1.4404/1.4571 (316L/316Ti). The Mini powder sampler is used for sampling powdery products from small containers, sacks, drums or open containers. Primarily in the pharmaceutical, medical products and biotechnology sectors, e.g. for testing raw materials, active ingredients and excipients.

Pneumatic heat press for textile transfers. ✔ Singe platen ✔ Even temperature and pressure ✔ Opens automatically ✔ Up to 50 x 60cm base plate ✔ Swing away 90° ✔ Pull out base plate This heavy-duty heat press is great for small to medium businesses. Due to its pneumatic closing mechanism, it is easy to operate without exhausting your arm. The pull-out base and the rotatable head make it even easier to place the textile and transfer. Furthermore, a small gap underneath the base plate allows you to thread the t-shirt onto the platen. Using a small display, you can adjust temperature and dwell time to your likings and a valve controls the air pressure. To safely operate the press, two buttons need to be pressed on each side of the machine to lower the heated element. With a range of different base platens, this press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more.

Specially designed for small and medium throughputs of up to 500 packages per hour, DWS static determines barcode, volume and weight in a single work step providing all relevant data for calculating freight and creating freight papers at the press of a button. With DWS static all shipping cost relevant data can be recorded at the touch of a button. The system comprises the tried and tested volume measuring system VMS 510/520, a robust static scale and a barcode scanner to read code information. All components are integrated in a sturdy mechanism. The system is ready for operation after a few minutes and is approved according to applicable standards. Also for full data recording in ERP systems verified systems are required.

Calibrate and adjust mechanical yarn brakes for the textile industry The test specimen is inserted in the UUT, which is mounted on a pneumatic slide. By pressing a button, the candidate moves to the running belt drive. The sample is then tested in different locking positions, the switching of the individual Paramtersätze is realized via a rotary switch. In each latching position, IO / NIO statement about the GMV2 light mounted on the column is displayed visually. After passing the examination, the tray will open again and the next candidate can be inserted. A speed controller as well as an ON / OFF switch for the drive are also integrated in the switch box under the GMV2. The entire inspection unit is mobile and complained to a height-adjustable lifting unit. The GMV2 and connect the switch are also mounted height adjustable in the profiles.

EGE amplifiers process the signals of the EGE filling level sensors for extreme temperatures at a safe distance and are used to set up the sensor via intuitive operation using potentiometer and LED strip. Amplifiers for EGE high temperature limit switches feature an auto-calibration of the switching point at the press of a button. EGE amplifiers provide switching signals or analogue signals, dependent on the device.

Switchbox for welding with two welding heads. To increase productivity, the switch box can be used to weid alternately in conjunction with a controller from the EVO series with two weid heads. All welding tools can be used, i.e., enclosed weid and open frame weid heads, turn tables or tube-to-tube sheet weid heads, gas or water cooled, with or without wire feed or AVC. By pressing the start button on the weid head, the welding program suitable for the respective weid head will get loaded. The weid head that is not being used is locked and can get prepared for the next welding.

This workstation enables the manual serialisation of drug packages and their aggregation into shipping cases. For this purpose, each individual box is first printed with order-related serialisation data by a thermal inkjet printing system as it passes by and then manually placed in a shipping carton. As soon as it is filled, the downstream thermal transfer label printer creates an individual serialisation label. The correct print data and print quality are permanently monitored by a vision system. The operator places the medicine products to be serialized on a reference edge at the infeed. As soon as the thermal inkjet printer has printed the serialisation data, the integrated vision system checks that the data is correct. If an error is detected (e.g. insufficient grading), the product stops at a certain position marked by red LEDs. The removal of the rejected product must be confirmed by pressing a button on the HMI.

Discover the easy handling of our Pressure Transmitter and Reader of the PT-RF series. The PT-RF series of pressure transmitters are an alternative solution for universal pressure measurements for fluid technology applications, which will provide benefits for system operators, maintenance personnel and repair technicians as well as for original equipment manufacturers. The advantages resulting from the use of the new technology for system operators, maintenance personnel and repair technicians are clear: Measurements can be carried very easily, without extensive training and within a few seconds at the press of a button and then documented in a reliable process. Unscrewing and re-installing pressure gauges or other measuring and display devices – practically a temporary opening of the system – is not required. Potential hazards for people, machines and the environment, for example from emitted residual oil in the test hose or leaks at the measuring point, as well as ingress of...