Precision laser machine - Import export

WiTEC Performance is the perfect solution for the most precise and fastest machining of your sheet material! The Performance is the flagship solution of the WiTEC machine family. A machine concept based on a FEM optimized design, built using premier precision components, and equipped with linear magnet motor technology, the Performance is able to achieve the highest levels of precision and speed, up to 80m/min! Thanks to the combination of Wissner’s innovative and patented hold&press Technology and sophisticated Vacuum System, you can mill even the smallest parts all the way through the finishing cut-out! No need for any adhesive paper or foil, no need for leaving connector tabs, and no deburring or cleaning is necessary! The ready-finished parts will go directly from the machine table to the end customer!

Do you have individual requirements for your laser processing center that our standard laser system of the LS series cannot meet? We develop together with our customers from stand-alone systems to integration into existing lines. In doing so, system know-how meets automation and laser technology: - robot solutions - portal variants - rotary table machines - sliding table systems - scanner solutions - integrated solutions based on VARIOMODUL® or, - at your request, on standard laser machines of the LS series For further information please take a look at our homepage.

The laser cutter system 2XL-3200 is one of the biggest in the cutter series. The processing area is 2,740 x 3,200 mm (107.8" x 126"), allowing to precisely cut and engrave large materials, for example textiles. The contactless laser cutting does not cause any bulges in the material and guarantees filigree cuts right from the beginning.

The cutting machine M-1600 offers laser cutting and engraving applications for the highest demands. With the optional eurolaser shuttle table system the productivity can be increased – offering a processing area of 1,330 mm x 1,630 mm (52.3" x 64.2"). This combination is ideal for applications like foils, acrylics, wood and textiles. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

Various materials can be cut and engraved on a processing area of 1,800 x 3,200 mm (70.8" x 126"). This CO2 laser machine is one of the largest among the eurolaser series and is available with many optional features. An ideal machine size for all applications requiring plenty of space. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

The CO2 laser machine XL-3200 with a processing area of 2.270 mm x 3.200 mm (89.3" x 126") is the largest model of the XL series. The huge dimensions allow the processing of big-size acrylic plates. The high acceleration of the optical head releasing the laser beam assures best efficiency even on this table size.

The laser cutter size XL-1600 is the professional solution for the laser processing of acrylic glass. With its modular concept and the easy handling it offers a future-oriented and efficient investment – just like all other laser cutting systems. With cutting and engraving tests performed on your individual materials we determine in advance the optimal configuration of your laser cutter.

CO2 lasers offer impressive results in the marking of organic and inorganic materials. A very high degree of detailed accuracy and long-lasting markings are the outstanding features of this marker. The compact marking lasers from eurolaser require very little space, operate reliably and accurately and are designed for use in made-to-order items through to small series. It goes without saying that they can also be integrated into production lines.

The eurolaser laser cutting machine M-1200 for acrylic glass is a compact model with a processing area of 1,330 mm x 1,230 mm (52.3" x 48.4"). Just like all eurolaser laser cutting machines the sealed-off laser technology in connection with exchangeable modular assembly groups reduces the lifecycle costs to a minimum. An investment which pays off! The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

The laser cutter M-800 with a processing area of 1330 x 830 mm (52.3" x 32.6") is well-prepared for all applications in the fields of laser cutting and engraving of acrylic glass (Plexiglas ®, Perspex ®). A special feature is the optional shuttle table system, which almost doubles your productivity, enabling you to hold all the aces even with a “smaller“ laser cutter. The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

Das Laser Cutter- und Gravur-System L-1200 bietet einzigartige Präzision und Schnittqualität bei höchsten Schnittgeschwindigkeiten, die sich je nach zu bearbeitenden Material durch individuelle Laserleistungen anpassen lassen. Alle eurolaser Cutter-Systeme sind mit Laserleistungen von 60-650 Watt erhältlich. Für Sie bedeutet das anwendungsbezogene Effizienz. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

With the laser cutting and engraving machine XL-1200 eurolaser offers the possibility to process extremely broad materials on a comparatively small system. The processing area is 2,270 mm x 1,230 mm (89.3" x 48.4"). With the optional camera recognition system which is also available for other systems the production flow can be automated, leading to an increased economy of the laser processing. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with

The laser system size XL-1600 is the professional solution for the laser processing of textiles. Besides, the automatic conveyor system enables the possibility to process textiles directly from the roll. By doing previous cutting tests with your individual materials, we test which laser system configuration would be the most suitable for you in order to achieve optimum results.

The CO2 laser machine XL-3200 with a processing area of 2,270 x 3,200 mm (89.3" x 126") is the largest model of the XL series. The huge dimensions allow the processing of big-size materials. The high acceleration of the optical head releasing the laser beam assures best efficiency even on this table size. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

An increase in productivity thanks to loading and unloading during the cutting process Workpiece removal during the cutting process at the collecting table possible The material feed is stretching-free Accurate placement of the workpiece through automatic edge control with the Feeding Unit Optional camera recognition system for automated processing Optional marking systems (e. g. Ink Marker) Processing of very large formats by edgeless continuation of cuts possible.

Loading and unloading during the cutting process Increasing efficiency by minimising downtime Safety concept for a riskless material change eurolaser customers could compete themselfes on the market because of the availability, functionality, flexibility of the systems. Since several years eurolaser has provided the possibility of splitting the processing table into two areas: The "Remote Operation" option. The advantage is to cut or engrave the placed material in the front area, while you unload the finished pieces and reload directly on the rear table surface. The laser changes automatically between the two processing areas, thus having the system in operation almost 100 per cent.

Loading and unloading during cutting process - increased system duty Easier accessibility of the pieces produced by moving the material support Increasing efficiency by minimising downtime Easy handling Automatic table shift after cutting process possible System is not encapsulated - Robot assembly possible (24/7 - operation) New material is located on the top shuttle table - thereby no material remaining is falling on the new material. Shuttle Table System automatic (STA) Table shift at the touch of a button Process starts automatically after cutting is finished Time saving by optimised processes Minimising supervision of the laser system Additional manual handling possible Snapping table module in after the shuttle process prevents incorrect handlings Of course, the Shuttle Table System is still available as a mere manual version.

Acrylics can be cut and engraved on a processing area of 1,800 mm x 3,200 mm (70.8" x 126.0"). This CO2 laser machine is one of the largest among the eurolaser series and is available with many optional features. An ideal machine size for all applications requiring plenty of space. The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

The laser cutting and engraving system L-1200 for acrylic processing offers unique precision and cut quality at highest cutting speeds, applicable to any material to be processed by individually choosing the right laser power. All eurolaser cutting systems are available with a laser power from 60 to 650 watt. Your benefit: application-related efficiency. The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

The cutting machine M-1600 offers laser cutting and engraving applications for the highest demands. With the optional eurolaser shuttle table system the productivity can be increased – offering a processing area of 1,330 mm x 1,630 mm (52.3" x 64.2"). This combination is ideal for applications like foils, acrylics, wood and textiles. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines.

This laser cutting device can be programmed quickly, which makes it the ideal tool for fast manufacturing small quantities. Draw - convert - cut. The cutting paths generated by CAD are converted in minutes and can be cut directly. A nesting tool (option) makes full use of its advantages, particularly in series production. It ensures optimal use of material so that no material is wasted unnecessarily. The AC requires a small footprint of 1340 x 1180 mm but offers a spacious work area with 500 x 500. Sheets of any length can be processed because there is a feedthrough on the back.

The ALM laser system is particularly suitable for welding large molds and tools, housings and machine components - wherever mobility and maneuverability are required. With the ALM you have exactly the mobility you need for welding. No matter whether in your own workshop or on site at the customer. The laser is ready for use within a few minutes. The arm can be quickly adjusted to the area to be welded and fixed in the desired working position using electro-hydraulic brakes. The operator then has the option of welding manually using a joystick or semi-automatically. One or more axes are automatically moved at a preset speed and with the joystick curves can be driven or small corrections made.

The laser welding systems of the AL series can be used universally. They might be integrated into existing machine structures or used with an application device for manual welding. In combination with our NC-controlled laser machining table AL-T you get a real professional solution. We offer the required performance class for every application. You can choose between 75 and 900 W. There is a wide range of processing lenses and equipment options for these laser systems. Regardless of whether you use a simple 90 ° deflection lens, the tilt-swivel lens or our circular welding lens - the laser beam always reaches the desired point on the workpiece with pinpoint accuracy. Additional equipment options are optionally available for the AL, such as: • Micro welding device for a welding spot diameter <100 µm • Rotary axis module for cylindrical welds • automatic wire feeder • Workpiece holder • camera system •…and much more

The ALW is a comfortable, ergonomic, and compact seated workstation that offers plenty of legroom, and which can be adjusted to the height of the operator via the height-adjustable foot plate. The observation lens offers a variable viewing angle from 10° – 50°, thus ensuring comfortable working. The closed, laser-proof housing makes the ALW a laser-protected workplace that can be used in a normal production environment without additional safety precautions. The laser system is easy to operate. In addition to configuring via the display, the laser parameters can be adjusted via the patented multifunction footswitch or adapted accordingly during welding. The large doors of the ALW can be opened wide. This facilitates easy loading.