Power sources - Import export

Rechargeable battery to provide the RC5 with backup auxiliary power when the main auxiliary power source is not present.

Rechargeable battery to provide the RC5 with backup auxiliary power when the main auxiliary power source is not present.

Mobile inverter power source for TIG manual or orbital welding with built-in cooling system and gas sensor. Can be used with all Orbitec controllers, particular in high-demand applications such as tube-to-tube-sheet. Technical Data: Output: DC Mains voltage: AC 3 x 400V Mains frequency: 50 / 60Hz Power rating: 15 kVA Generator output: 20.3 kVA Current range: 5A – 350A Welding current: — 60% TIG / MMA: 350A — 100% TIG / MMA: 300A Cooling efficiency: 1500W Water column: 35m / 5l / min. Tank capacity: 12l Weight: 131kg Dimensions (L x W x H): 1100 x 455 x 1000 mm Package includes: — Inverter — Power cable — 10l coolant

Lightweight, compact inverter power source for TIG manual or orbital welding (automatic detection) in conjunction with all Orbitec controllers. Technical Data: Output: DC Mains voltage: AC 1 x 230V Mains frequency: 50 / 60Hz Power rating: 4.4kVA Generator output: 7.5kVA Current range: 5A – 200A Welding current: - 25% TIG / MMA: 200A — 60% TIG / MMA: 150A — 100% TIG / MMA: 120A Weight: 8.9kg Dimensions (L x W x H): 475 x 180 x 295mm Package includes: — Inverter — Power cable Optional: Cool 50 water cooling unit Inverter Tetrix 200 (auto-range) as an additional model (control range 5 - 200A \ 110 / 230V \ item number 1.2.0120): Same characteristics as Tetrix 200 inverter but an input voltage of 115VAC or 230VAC can be used. No switching required as the unit recognises the input voltage and adjusts automatically. Note: Maximum output of 150A when used with 115VAC.

Tavrida Electric has revolutionised circuit breaker design by developing a new generation of circuit breakers and controls with exceptionally fast opening, closing and response times. Opening and closing times are as low as 12 and 24 ms, respectively. This enables Fast transfer switches with transfer times as fast as 2 cycles. Such quick operational times allows very sensitive loads to operate without interruption in case of a main power source loss. The fast transfer switch solution eliminates costly downtime, reduces production equipment stress, ensures quick return on investment. Arc flash mitigation with interruption in one period. That quick interruption time increases operational safety, reduces switchgear restoration time and loss of productivity, limits switchgear damage and repair costs. Fault current limiting solutions without operational losses capable to automatically reconnect power sources.

Self-diagnosis: Overheating, short circuit control,mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection Special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages Two gun connection for stud welding guns

Self-diagnosis: Overheating, short circuit control, mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment Stud counter: standard Interface for automatic components: optional Menu: selection of various languages

Self-diagnosis: Overheating, short circuit control, mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection Special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages Two gun connection for stud welding guns

Self-diagnosis: Overheating, short circuit control,mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages

Self-diagnosis: Overheating, short circuit control,mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages

Self-diagnosis: Overheating, short circuit control, mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection Special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages

Self-diagnosis: Overheating, short circuit control, mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment Stud counter: standard Interface for automatic components: optional Menu: selection of various languages

Fully controlled power source with thyristor bridge For threaded studs up to 8 mm Designed for welding on building sits Self-diagnosis: Overheating and mains phase failure, short circuit control, malfunction of pilot arc Microprocessor controlled Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Stud counter: standard

DP-270C: A further Highlight of the D-Series The fully digital D-Series power sources also deliver noticeably constant arc stability. Easy operability moves through all setting options like a thread. Persuade yourself: the perfection of welding results speaks a clear language in this regard. The D-Series family possesses a rich repertoire of functionalities for the MIG/MAG or the TIG welding. The MIG/MAG Welding machine DP-270 is also ready for TIG welding and has got a CuSi/CuAl braze welding software on board.

The plasma cutting system HiFocus 600i neo sets new standards for plasma cutting: materials with a thickness from 0.5 to 160 mm can be cut precisely. Furthermore the system is suited for marking, bevel and underwater cutting. Consisting of two power sources (HiFocus 360i neo, power module HiFocus 600i neo) the system achieves a maximum cutting current of 600 A and can be adapted to guiding systems. With HiFocus neo the user benefits, compared to competitors, from higher speed when cutting and marking electrically conductive materials, ensuring at the same time excellent quality and low process costs. Thanks to the optimised technology, the consumables are handled gently and the plasma cutting process is more efficient. The plasma cutting system HiFocus 600i neo uses the approved Contour Cut technology for cutting contours, holes and webs fast and precisely in mild steel.

The HiFocus 80i is the smallest high-precision plasma cutting unit worldwide. It covers a cutting range from 0.5 mm to 25 mm. It provides highest quality when cutting thin and medium-sized sheets with an unbeatable price-performance ratio. A wide range of special torches and various fields of application in connection with robot systems make it ideal for the automotive industry.

The HiFocus 440i neo is one of the most flexible and most powerful high-precision plasma cutting units worldwide. Its wide cutting range from 0.5 mm to 120 mm i means considerably higher flexibility. The latest inverter technology allows the highest marking quality and functionality on the market. The HiFocus 440i neo is ideally suited for steel service centers, steel producers and distributors. With HiFocus neo the user benefits compared to the competitors from higher speed when cutting and marking electrically conductive materials, ensuring at the same time excellent quality and low process costs. Thanks to optimised technology, the consumables are protected and the plasma cutting process is more efficient.

The HiFocus 360i neo is one of the most flexible and most powerful high-precision plasma cutting units. Its wide cutting range from 0.5 mm to 80 mm means a considerably higher flexibility. The latest inverter technology allows the highest marking quality and functionionality on the market. The HiFocus 360i neo is ideally suited for steel service centers, steel producers and distributors because it can be combined with 2D or 3D CNC-controlled guiding systems like gas cutting machines, robots and pipe cutting machines. With HiFocus neo the user benefits compared to the competitors from higher speed when cutting and marking electrically conductive materials, ensuring at the same time excellent quality and low process costs. Thanks to optimised technology, the consumables are protected and the plasma cutting process is more efficient.

With just a few settings the plasma cutting units of the Smart Focus series achieve excellent results in the cutting range from 1 to 100 mm. Even under challenging conditions highest cutting quality and speed are realised. Therefore we use our proven cutting technologies as for example Contour Cut for cutting mild steel. The optimised gas control units and torches protect the consumables, reduce the gas consumption and the costs per cutting metre.

The HiFocus 161i neo is the latest high-precision plasma cutting system for the cutting range between 0.5 mm and 50 mm. Equipped with the soft-switch inverter technology, it offers a wide range of possibilities for cutting and marking thin and medium-sized sheets. It meets the requirements of the metal and container construction industries, the engineering and automotive industries and many other sectors. The HiFocus 161i neo can be combined with 2D as well as 3D CNC-controlled guiding systems, i.e. gas cutting systems, robots and pipe cutting systems.

• No external power sources needed • High holding forces • High stiffness for guaranteed performance • Kinetic energy from shock load is absorbed through dampening element • Integrated sensor for position control • High re-engagement accuracy • Automatic re-engagement • Reduced machine downtime for increased productivity • Available for all motor spindle designs and dmensions • Maintenance-freeMotor-Spindle Safety System