Polyester - Import export

ALWA MOULD COAT is a vinylester resin and is used for surfaces of RTM, polyester and laminate moulds.

ALWA UP GELCOAT is an aluminium filled polyester surface resin with a temperature resistance of 110 °C. Pot life is approx. 20 – 30 min. at room temperature, when using 1 – 2 % hardener (art. no. 3150001). The top layer can be polished to high gloss.

ALWA BARRIER COAT is a laminate resin, which is applied to protect the gelcoat for instance with glass fleece (e.g., ALWA MOULD COAT and ALWA UP GELCOAT).

The point bonded polyester fleece Cora®Dot is ideally suited for filtration of rolling oil by using of precoating agents.

100% polyester; double knitted to provide efficient cleaning of surfaces during maintenance of cleanroom under class 1000 to class 100,000. good absorbency rate multipurpose reusable wipe; washable wide range of application for cleaning specially cleanroom equipment like computers, electronic equipment, laboratory apparatus, tables and chairs, etc.

Gütermann can provide the best results with good abrasion resistance and high breaking strength. Its optimal elongation properties, on the other hand, guarantee an attractive, even seam. Exceptional rub and abrasion resistance / Problem-free, even when using fine needles / No stitch hole tearing / Excellent sewability / Good thermal tolerance thanks to heat-repellent preparation / Highest sewing reliability.

This Merkaiy special skirt has a super urban sporty look with a stretchy waistband. Things to know : Sidepockets Waistband Straps Pleat Desgin Stretchy Waistband 95% Polyester 5% Cotton Note: prices can vary depending on your minimum order quantity.

Polyester heaters also referred to as Polyester film heaters or Polyester foil heaters consist of an electrically conductive ink between two insulating respectively carrier layers of polyester. With a maximum size of 600 x 1000 mm, their average height is only 0.2 mm. As the picture examples show, practically any shape and type of cut-out is possible. Polyester foil heaters are resistant to permanent temperatures of up to 90°C (max. 100°C for short periods). It is generally not possible to predict which temperature a Polyester heating element will reach in the application, as there are extremely many influencing factors. These include not only the power, but also the mass and type of goods to be heated, the ambient temperature, air currents, the type of mounting and, of course, the control technology. Typical applications for Polyester heaters are e.g. cup warmers in coffee machines, mirror heaters, plate heat exchangers, flat applications with a target temperature below 90°C.

Thickness range: 150-800 µm non oriented film made of Polyethylenterephthalate Pre-treatment (surface): Pre-treatments and other additional characteristics possible on request PET-A, PET-G, PET-GAG Application Office Equipment Graphic Arts Industry, Card, Pharmaceutical Industry & Healthcare, Engineering Use, Lamination, Packing

We offer polyester polyols In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

Cora®Jet is a water jet bonded polyester fleece. It is characterized by a very uniform fibre structure. The large material thickness also supports the deposition of the particles in the depth of the filter medium.

Cora®Spun is a high-quality polyester spunbond, which is thermally bonded and has a high tensile strength in the longitudinal and transverse direction. It is a suitable universal medium for surface filtration and precoat filtration.

Flexible Polyester Heaters consist of a conductive ink between two insulation layers of polyester. The heater can be pressed on or fixed with a self-adhesive foil. Wrapped in PVC the use in liquids is possible as well. Typical standard applications are e.g. mirror heaters, water bed heaters, or low temperature room heaters. For terrarium and aquarium heaters we offer standard elements as well.

Keiper’s high-performance FLEXA flat belts are made of fully synthetic polyamide or polyester fabric and polyamide foil, with or without a suitable adhesion coating made of nitrile-butadiene rubber, depending on the wide range of possible power transmission and conveying applications. Fitted with a polyamide or polyester reinforcement With a one-sided or two-sided coating of nitrile-butadiene rubber, highly resistant to abrasion and wear Different surface structures FLEXA belts can be used as: Power transmission belts Folder-gluer belts Machine belts Tangential belts Spindle belts Properties + Suitable for a large temperature range + High resistance to abrasion + Very good dynamic properties + Resistant to oils and acids + Outstanding anti-static properties of black NBR - Gets brittle when exposed to UV light and ozone (only for limited outside use) - Processing is work and energy intensive (vulcanization, hardening)

We can offer flexible heating elements manufactured from three different insulation materials: silicone, polyimide (Kapton) or polyester. Each of these materials possess different properties which make them suitable for diverse applications. Silicone heaters can also be produced in very large sizes, whereas polyimide is significantly thinner and polyester unbeatable in price when it comes to high quantities. All three of them are bespoke products made according to your needs, so within the bounds of what is technically feasible you as the customer can determine almost every feature of your heater. This can include; voltage, wattage, dimensions, shape, sensors, leads, plus much more. Due to their low thermal mass flexible polymer insulated heaters distinguish themselves by a very short response time and excellent controllability.

The PurMop® EC40 single-use mop comprises a cleaning layer made from a robust polyester knit with special structure. This enables a good pick-up ability for regular contamination as well as an even fluid distribution with disinfectants on all types of cleanroom floors. Available in non-sterile (EC40) and sterile (EC40-S) version.

PurMop® EF40 single-use mop comprises a specially developed microfiber looped cleaning pile made from 80 % polyester-microfiber and 20 % polyester . This innovative disposable mop stands out through its superior cleaning ability and a good price-performance ratio. It offers an effective and safe alternative to reusable mops, without the need of decontamination after use. Available in non-sterile (EF40) and sterile (EF40-S) version.

Cora®Oil is an oleophilic polyster fleece and a unique technical innovation! Cora®Oil is a high quality thermally bonded polyester nonwoven and capable of separating oil and water. This allows oils to be completely filtered out of water. Another advantage: Cora®Oil can be used in all common band filters.

As a standard, silicone hoses are made with polyester fabric. Reinforced fabrics such as aramid (NOMEX), Kevlar or fiberglass are also available as options. There are special Viton inserts for petrol and oil. All hoses are available by the meter, elbows and reducers. Custommade molded hoses can also be produced according to customer requirements.

The PurMop® EFB40 single-use mop with its innovative cleaning pile was developed for highest performance in cleanroom cleaning. The special polyester scrub stripes loosen even tough residues and contaminants during wiping which are then safely picked up by the microfiber stripes. Available in non-sterile (EFB40) and sterile (EFB40-S) version.

GRP gratings combine many experienced product and material properties and flexible adaptation to the most possible applicationsIn our product catalogue on our website you will find all important products in the area of ​​GRP gratings. Are you looking for a special solution for your application? Talk to us!

GRP gratings combine many experienced product and material properties and flexible adaptation to the most possible applicationsIn our product catalogue on our website you will find all important products in the area of ​​GRP gratings. Are you looking for a special solution for your application? Talk to us!

The innovative PurWipe® N2 cleanroom nonwoven wipe consists of a polyester-polyamide-microfiber material. The ultrafine microfibers ensure good fluid absorbency as well as a high cleaning ability and optimal removal of tiny particles on all types of surfaces. Thanks to its superior tear resistance and fully synthetic material, the N2 wipe is ideally suited for a broad range of applications. Recommended for effective cleaning and disinfection on various surfaces in cleanrooms. Available in non-sterile, sterile and other sizes.

GRP gratings combine many experienced product and material properties and flexible adaptation to the most possible applicationsIn our product catalogue on our website you will find all important products in the area of ​​GRP gratings. Are you looking for a special solution for your application? Talk to us!

GRP gratings combine many experienced product and material properties and flexible adaptation to the most possible applicationsIn our product catalogue on our website you will find all important products in the area of ​​GRP gratings. Are you looking for a special solution for your application? Talk to us!

GRP gratings combine many experienced product and material properties and flexible adaptation to the most possible applicationsIn our product catalogue on our website you will find all important products in the area of ​​GRP gratings. Are you looking for a special solution for your application? Talk to us!

GRP gratings combine many experienced product and material properties and flexible adaptation to the most possible applicationsIn our product catalogue on our website you will find all important products in the area of ​​GRP gratings. Are you looking for a special solution for your application? Talk to us!

Thickness range: 1,4-500 µm Biaxially oriented film made of Polyethylenterephthalate Optics: glassclear, transparent, milky, white, matt, glossy, opaque, coloured, metallisation on request e.g.: Hostaphan®, Lumirror®, Melinex®, Mylar® Application: Automotive, Electrical Industry, Graphic Arts Industry, Rubber Industry, Card, Furniture Industry, Pharmaceutical Industry & Healthcare, Engineering Use, Label, Lamination, Packing

We provide silos for all kinds of plastics as e.g. PVC, PP, PA, ABS, POM, PE and PET. Today, flexible A.B.S. Silos are in demand everywhere plastics have to be stored quickly, efficiently and safely with optimum value for money. Construction and equipment are precisely adapted to the special requirements of the respective plastic storage material, e.g. concerning outlet diameter, cone bevel or geometry.