Pneumatic mounting - Import export

The hightemperature sliding gate control valve type 8024 in reinforced GS3 design with integrated positioner is suitable for a wide range of process applications up to 530°C. Media such as steam, liquids, gases, etc. can be precisely controlled even in the hightemperature range. Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Positioner with mounting acc. to NAMUR standard Metal bellows Limit switch Position feedback Manual override Pilot valve . . .

The simple and compact design of this miniature PE converter with fixed switch-on pressure of 0.8 bar allows its use in various applications such as medical technology, dental treatment units, robotics, analysis systems, process and safety engineering. Easy mounting and high functional reliability are other advantages. By using silver contacts a long lifetime can be ensured even at high switching frequencies. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID.

The simple and compact design of this miniature PE converter with fixed switch-on pressure of 0.8 bar allows its use in various applications such as medical technology, dental treatment units, robotics, analysis systems, process and safety engineering. Easy mounting and high functional reliability are other advantages. By using silver contacts a long lifetime can be ensured even at high switching frequencies. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID.

Solenoid valves for direct mounting on the pneumatic actuator or cylinder. Cylinder and valve become a compact unit thanks to simple installation in the air connection. Available in sizes 1/8 and 1/4 and with all common solenoid voltages. With manual override.

Electrically controlled pilot valves for direct mounting on pneumatic valve actuators.

The Type 2040 an visual and electronic position indicator for mounting on pneumatic valves with linear or rotary actuator is characterized by a compact design, the possibility to identify the valve position via switch contacts. The various configurations and diagnostic function can be managed via the standard Schubert & Salzer PC Software "DeciveConfig".

High feeding accuracy, quick cycles and simple operation Servo feeding in compact design with maintenancefree AC servo motor Fits just about any press +/ 0,025 mm feeding accuracy through incremental servo encoder Lightweight rollers with special hard chrome layer Mechanical pilot release Sturdy steel plate bolton design Height adjustment via threaded spindle Catenary rolls and edge guides at machine entrance Stock guides at exit Highperformance control with good functionality; with remote control for setup on 3,5 m cablel 24 V DC proximity switch adjustable piloting lever to be mounted to press pneumatic pilot release

Effectively reduce pneumatic equipment noise Engineered to provide an optimal balance between noise reduction and acceptable backpressure in the pneumatic system, our porous plastic silencers offer numerous advantages over metal acoustical silencers. Our porous plastic silencers are designed with a significantly lower weight along with greatly improved corrosion resistance and the ability to filter particles and aerosols. This leads to greater durability, assembly speed and cost-efficiency for our partners. Designed with a solid integrated threaded adapter to ensure easy mounting on pneumatic equipment, our silencers: Fit most standard valves – Offered in an extensive selection of sizes designed to fit most standard valves, including NPT, BSP, M5 and “push-in” styles. Enhance equipment longevity – Effectively filters particulates and aerosols. Reduce pneumatic equipment noise – Engineered with a porous plastic structure, offering greater noise reduction compared to metal and...

Calibrate and adjust mechanical yarn brakes for the textile industry The test specimen is inserted in the UUT, which is mounted on a pneumatic slide. By pressing a button, the candidate moves to the running belt drive. The sample is then tested in different locking positions, the switching of the individual Paramtersätze is realized via a rotary switch. In each latching position, IO / NIO statement about the GMV2 light mounted on the column is displayed visually. After passing the examination, the tray will open again and the next candidate can be inserted. A speed controller as well as an ON / OFF switch for the drive are also integrated in the switch box under the GMV2. The entire inspection unit is mobile and complained to a height-adjustable lifting unit. The GMV2 and connect the switch are also mounted height adjustable in the profiles.

— Slide gate valve for solids flow on/off control, mainly used as an automatic valve for loss-in-weight feeder refill — Double acting pneumatic drive — Readily mounted 5/2 way solenoid valve Diameters - Different versions 80–400 mm (3.1–15.7 in)

The GEMÜ 1235 electrical position indicator is suitable for mounting to pneumatically operated linear actuators. The position of the valve spindle is electronically detected and evaluated through play-free and non-positive mounting. Intelligent microprocessor controlled functions make commissioning and support during operation easier. The current position of the valve is displayed via high-visibility LEDs and fed back via electrical signals. The GEMÜ 1235 has been specially designed for valves of small, medium and large nominal sizes with a stroke of 2.2 to 74.4 mm. — Communication and programming interface IO-Link — Adjustable switch point tolerances — Speed-AP function for fast mounting and initialisation — High visibility position indicator by LED — Can be fitted to GEMÜ valves or third-party actuators — On-site or remote end position programming via programming input

The GEMÜ 4242 combi switchbox is suitable for mounting to pneumatically operated linear actuators. It utilises a microprocessor controlled, intelligent position sensor and an analogue travel sensor system. The combi switchbox was specially designed for small to medium nominal sizes and strokes ranging from 2 to 30 mm. The combi switchbox has an integrated 3/2-way pilot valve. —Standard OPEN and CLOSED feedback —Speed-AP function for fast mounting and initialisation —High visibility position indicator —Adjustable switch point tolerances —Extensive diagnostic facilities —Local or remote programming via programming input —Simple and fast mounting —Can be retrofitted to GEMÜ valves or third-party actuators

The Lapmaster Wolters Model 20 is a bench mounted unit with a heavy duty carbon steel weldment base. The model 20 is ideal for engineering workshops, where flatness and finish are of prime importance. It is equipped with a 508mm diameter serrated lap plate, manufactured from Grade 300 grey cast iron to ISO 185(2005) as standard. In-shop lapping reduces costs of component processing and equipment maintenance programs. Worn parts are reconditioned and salvaged, thus eliminating scrap. The pneumatic lift version of the Lapmaster Wolters Model 20 is based on the open face machine. Pressure weights are attached through self-aligning bearings to the rods of the pneumatic cylinders. The cylinders are mounted on a framework located over the lap plate on an upright column. The primary function of the pneumatic arrangement is to permit loading and unloading to be carried out without the need to lift pressure weights manually.