Pneumatic cutting - Import export

Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Pneumatic tilting of the heads (90°, 45° or 22,5°). The intermediate degrees can be obtainedby manually setting mechanical stops. Realized with cutting lenght of 4000 mm (7650 mm with accessories), 5000 mm (9650 mm with accessories), 6000 mm (11650 mm with accessories). It is equipped with the system EC 609. Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged...

Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 22,5° and 135°. Realized with cutting lenght of 4000 mm (7650 mm with accessories), 5000 mm (9650 mm with accessories), 6000 mm (11650 mm with accessories). It is equipped with the system EC 700x. Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged to connect a motorised belt conveyor.

Double mitre saw with a fixed unit on the left and the other one movable. Manual positioning of the movable unit. Pneumatic tilting of the heads (90°, 45° or 22,5°). The intermediate degrees can be obtainedby manually setting mechanical stops. Realized with cutting lenght of 4000 mm, 5000 mm, 6000 mm. It is equipped with the system EC 601. Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged to connect a motorised belt conveyor.

Avola GAMA 65 V revolving cross cut / rip cut saw Equipment / scope of supply- Cutting heights 90° / 245 mm - 45° / 164 mm - 30° / 113 mm - Machine table with lateral movement approx. 400 mm with pneumatic brake system - Machine hood with lateral PVC protective curtains - pneumatic clamping cylinder left - right - pneumatic cross-cutting operation using two-hand control - electrical saw blade inclination 90 – 30° - Revolving table 0 - 270° - Laser light for cross-cutting - Saw bla de height adjustment via mechanical stop system with scale - TCT saw blade 650 mm, dust extraction spigots 160 / 125 mm - Drive motor 12 kW – direct motor speed 1/min – 3,000 - Saw blade speed 1/min – 3,000

Avola GAMA 65 K Revolving Cross Cut Saw for professional applications Technical Equipment Motor rating 8,1 kW/400 Vac-50 Hz, star / delta start sawblade mounted direct on motor shaft Motor speed 3.000 rpm / sawblade speed 3.000 rpm Sawblade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm Electrical sawblade inclination 90 – 30° – digital readout Revolving table 20° – 160° Two-hand pneumatic cross cutting operation Laser light for cross cutting position TCT-sawblade, dia. 650 x 30 mm x T 54 Dust extraction spigot 125 / 80 mm Options Additional clamping cylinders, horizontal, left-right Brush curtain for safety clamping hood

This production cutting machine is available as a manual and as a pneumatic variant. Its cutting motors ensure optimum cutting results thanks to their unique minimum vibration. 4.6 kW drive. For hydraulic hose assemblies up to 2” and industrial hose assemblies up to 4”. Unique drive motor with double bearings and oversized shafts •Reduce scrap with straight cuts •More cuts between sharpening while increasing profits •Less contamination in the shop and in the end product will result in more parts out the door and a better environment in the building •Maximizes motor life, giving you the lowest cost of ownership in the market •Cut faster and generate a more saleable product Quality steel blade •Long lasting German quality steel blades, lowering the cost of ownership Compact design •Ideal for a mobile service CE compliant •Brake motor for safety •Security shield

Where pneumatic tools of the MBS series reach their performance limits, the eccentric cutting machine opens up new possibilities in cutting performance. Instead of a pneumatic cutting tool, the Metzner ST 25 uses an electrically driven eccentric mechanism that carries a punching blade. This enables us to increase the performance of the die-cut into completely new dimensions, of up to 800 cuts per minute. An agreeable side-effect: With the electric drive for the cutting tool, the ST 25 works very quietly – which is why customers with low-noise working environments also like to opt for this model.

Application of pneumatic tear notch hole puncher: The hole puncher is pneumatic type, usually should be installed on bag making machine and punch V-cut tear notch for plastic or paper bag. It is V2x4mm hole puncher with 100mm passing slot length. Passing Slot (throat depth) means the space to pass bag (from hole center to inside edge). The main hole shapes we made for aluminum foil bag, foil ziplock bag , food packaging bag , grape bags and stand up pouches are: Euro hole puncher, Butterfly hole puncher, Round hole puncher, Triangle hole puncher, Die-cut hole puncher, Handle hole puncher, Tear notch puncher and so on. Any hole size and shape can be customized. Punching materials are: PO, PP, PE, OPP, CPP,PVC, PPE, PPU, CPE plastic material, paper , laminated materials,non-woven and so on.

Application of pneumatic handle hole puncher: The hole puncher is pneumatic type, usually should be installed on bag making machine and punch handle hole for plastic or paper bag. It is 80x20 mm carry hole puncher with 50mm passing slot length. Passing Slot (throat depth) means the space to pass bag (from hole center to inside edge). The main hole shapes we made for aluminum foil bag, foil ziplock bag , food packaging bag , grape bags and stand up pouches are: Euro hole puncher, Butterfly hole puncher, Round hole puncher, Triangle hole puncher, Die-cut hole puncher, Handle hole puncher, Tear notch puncher and so on. Any hole size and shape can be customized. Punching materials are: PO, PP, PE, OPP, CPP,PVC, PPE, PPU, CPE plastic material, paper , laminated materials,non-woven and so on.