Pliers - Import export

The Ronix RH-1440 sheet metal locking plier is a quality product from the varied collection of Ronix hand tools and sheet metal pliers. This tool is used to hold and move sheet metal, bend the corners of workpieces, curve the edges of parts, and clamp and hold sheet metal to be welded while working. The Ronix RH-1440 8-inch sheet metal clamp is made from high-quality stainless steel. In addition, its wide, machined, standard-size jaws are designed to hold the part in position. The clamping force of this tool is evenly distributed, so the sheet metal is not damaged during transport

• Swedish model • Serration against direction of rotation • With 90° angled jaw • Infinitely variable • Red powder coated • Made of chrome vanadium steel, forged, oil-hardened

• For gripping and bending • With long round jaws • Serrated inside jaws • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• For cutting hard and soft wires • With cable stripper function for all common cables ranging from Ø 8 mm to Ø 13 mm • For accurate, fast and safe stripping of all common round cables • Cutting edges inductively hardened • Precision cutting edge for the finest wires • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• For fixing reinforcement steel with binding wire from a roll • Fast, reliable and cost-effective drilling and cutting of the wire in a single operation • Cutting edges inductively hardened • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• For holding and bending • With long flat jaws • Serrated inside jaws • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• American pattern • For holding, gripping, bending and cutting work • For cutting hard and soft wires • Cutting edges inductively hardened • With Nail- & wire holder • Gripping zones for flat and round materials • Asymmetric inside jaws for better grip on the workpiece • Integrated ring spanner • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For gripping and bending • With long round jaws • Serrated inside jaws • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For loosening, cutting and attaching balance weights • For opening and pressing together the retaining springs • With cutting edge for separating the balance weights • Made of special tool steel, forged, oil-hardened

• For cutting hard and soft wires • For holding, gripping, bending and cutting work • Cutting edges inductively hardened • With cutting edge and burner hole • With long, 45°-angled, flat-round jaws • Serrated inside jaws • Integrated ring spanner • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For cutting hard and soft wires • For holding, gripping, bending and cutting work • Cutting edges inductively hardened • With cutting edge and burner hole • With long, 45°-angled, flat-round jaws • Serrated inside jaws • Integrated ring spanner • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For fitting extarnal circlips on shafts • With 90° angled jaws • With exchangeable tips made of special steel • Anti-slip, twisted precision tips • With retainer • Handles made of solid rolled steel

• For holding and bending • With long flat jaws • Serrated inside jaws • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• American pattern • For holding, gripping, bending and cutting work • For cutting hard and soft wires • For shortening screws M 3.5 • Cutting edges inductively hardened • With Nail- & wire holder • Gripping zones for flat and round materials • Asymmetric inside jaws for better grip on the workpiece • Integrated ring spanner • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For fitting snap rings and retainer rings without finger holes for shaft retainers of any description • With opening spring • Made of tool steel, forged, oil-hardened

• For fitting internal circlips in holes • With straight jaws • With exchangeable tips made of special steel • Anti-slip, twisted precision tips • With retainer • Handles made of solid rolled steel

• For fitting internal circlips in holes • With 45° angled jaws • Anti-slip, twisted precision tips • Handles coated with plastic • Made of chrome vanadium steel, forged, oil-hardened

• The classic elbow pipe wrench • Serration against direction of rotation • Slim, S-shaped jaws • With 45° angled jaw • Three-point contact on tube, self-clamping • Infinitely variable • Red powder coated • Made of chrome vanadium steel, forged, oil-hardened

• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • For cutting hard and soft wires • Cutting edges inductively hardened • Serrated inside jaws • Ergonomic angled head • Integrated ring spanner • With opening spring and catch • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • The ergonomic design of the pliers reduces work fatigue and also protects tendons and joints of the user • Made of tool steel, forged, oil-hardened

Slip Joint Pliers are multifunctional hardware grippers and benders. These pliers are useful for a wide range of tasks in a wide range of professions. RH-1190-1196-1198 RH-11 Slip Joint Pliers are an ergonomically designed hand tool from Ronix that you should have in your toolbox. These pliers are available in three sizes and will assist you in completing a variety of jobs around the house or in the workshop.

• Smooth inside jaws for extremely precise work • Tight-fit joint movement • With box-joint and opening spring • Handles with ergonomically shaped ESD multi-component sleeves, electrically conductive • Made of tool steel, forged, oil-hardened

• Strong design • With long round jaws • Serrated inside jaws • With lap-joint and strong handles • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• For gripping small parts and forming wires • Smooth inside jaws, edges rounded • Tight-fit joint movement • With box-joint and opening spring • Handles with ergonomically shaped ESD multi-component sleeves, electrically conductive • Made of tool steel, forged, oil-hardened

• Smooth inside jaws for bending fine loops • Tight-fit joint movement • With box-joint and opening spring • Handles with ergonomically shaped ESD multi-component sleeves, electrically conductive • Made of tool steel, forged, oil-hardened

• For gripping small parts and forming wires • Tips bent 45°, smooth inside jaws, edges rounded • Tight-fit joint movement • With box-joint and opening spring • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• For gripping small parts and forming wires • Smooth inside jaws, edges rounded • Tight-fit joint movement • With box-joint and opening spring • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• Strong design • With long flat jaws • Serrated inside jaws • With lap-joint and strong handles • Handles coated with plastic • Made of tool steel, forged, oil-hardened