Results for
Germany
height adjuster with plastic foot plate thread M10 hex bunch SW14 foot plate Ø45mm made of PA black or white
Request for a quoteGermany
heigt adjuster with rotatable riveted plastic foot plate steel plate recasted with octagon SW38 x 7mm high made of plastic. Available thread bolts from M8 - M16.
Request for a quoteGermany
Material: - seat and backrest: plastic - frame: tubular steel, polyester powder-coated or chrome-plated Selection options: - plastic color - frame color - fixed connectors
Request for a quoteGermany
plastic cap for steel foot plate Ø46mm made of PE black or natural colour
Request for a quoteGermany
Screen printing allows the imprint of various plastic types. We are mainly specialised in transparent plastics. Flat-plates can be imprinted and reshaped in a following process if required. On our modern semiautomatics we can imprint sizes up to 1500 x 1000 mm, which are especially used for large series. Components up to 3000 x 1500 mm can be imprinted on our large screen printing table. The screen printing area is placed in a seperate hall in order to guarantee highest cleanness. In addition to the mentioned standards we are offering specialised knowledge, accuracy and precision.
Request for a quoteGermany
Material: - seat shell: plastic - frame: tubular steel, Ø 21 x 1,5 mm - frame color: polyester powder-coated or chrome-plated Selection options: - plastic color - frame color - fixed connectors
Request for a quoteGermany
Table top flame retardant (B1): - Particle board according to DIN EN 312, melamine resin coated on both sides and 2 mm ABS edge - the table top is hygienic, it is not harmful to food, and is simple to clean High-quality frame MILA: - tubular steel, apron: 20 x 40 mm | legs: 30 x 30 mm - color: polyester powder-coated or polished high-gloss chrome-plating - plastic glides for safe standing, inclusive level compensation up to 15 mm Selection options: - table top color - dimension / shape - frame color
Request for a quoteGermany
HPL table top: - chipboard according to DIN 68765, coated on both sides with 0.8mm HPL/CPL coating and 2 mm ABS edge - the table top is hygienic, it is not harmful to food, and is simple to clean High-quality frame MILA: - tubular steel, apron: 20 x 40 mm | legs: 30 x 30 mm - color: polyester powder-coated or polished high-gloss chrome-plating - plastic glides for safe standing, inclusive level compensation up to 15 mm Selection options: - table top color - dimension / shape - frame color
Request for a quoteGermany
Melamine table top: - chipboard according to DIN 68765, melamine resin coated on both sides and 2 mm ABS edge - the table top is hygienic, it is not harmful to food, and is simple to clean High-quality frame MILA: - tubular steel, apron: 20 x 40 mm | legs: 30 x 30 mm - color: polyester powder-coated or polished high-gloss chrome-plating - plastic glides for safe standing, inclusive level compensation up to 15 mm Selection options: - table top color - table top thickness - dimension / shape - frame color
Request for a quoteGermany
In its sensor housing, the combiSENSOR combines two displacement sensors. This unique sensor concept enables one-sided thickness measurement of electrically non-conductive materials on metallic objects. Its field of application is the thickness measurement of plastic film or of plastic coating on metal plates. The eddy current sensor penetrates the plastic layer and measures the distance to a metallic material underneath it, e.g. a metal plate. The capacitive sensor synchronously detects the distance to the plastic material. The thickness is determined based on the difference of both sensor signals.
Request for a quoteGermany
Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.
Request for a quoteGermany
Adjustable feet in over 20,000 variations — fixed adjustable foot — hinged adjustable foot function: — screw-on (with screw-on hole/with extension arm/through accessories: floor mounting for trapeze plate) — levelable — swiveling — anti-slip (by accessories: anti-slip plate made of thermoplastic elastomer) — EDS-capable Plate shape and size: — Round — Trapezoidal shape — Square — Diameter 20 mm to 120 mm other shapes on request Material plate: — Plastic PA, glass ball reinforced — steel, galvanized — zinc die casting — stainless steel other materials and surfaces on request Threaded rods for adjustable feet with/without ball head — swivel range 0° - 20° degrees — M5, M6, M8, M10, M12, M14, M16, M20, M24, M30 — Length: 20 - 300 mm — Alternative: ball head with internal thread — Material: galvanized steel, stainless steel Colors: black, silver, other colors on request
Request for a quoteGermany
T-slot feet — to protect the floor and the aluminium profile — can also be used as spacers, e.g. when transporting aluminium profiles and frames — or as a buffer stop, e.g. for door frames incl. anti-slip-plate, prevents movement of T-Slot foot on slippery surfaces and absorbs some vibration can be mounted into the slot by a quarter turn Profile: 20, 30, 40 Profile slot: 5, 6, 8, 10 Material: Plate: PA plastic, glass ball reinforced Anti-slip plate: thermoplastic elastomer, ≈70 Shore A Color: black
Request for a quoteGermany
CONEC has developed an ODVA compatible IP67 Fiber Optic connection for harsh indoor and outdoor environment. The new system is a bayonet locking enclosure with integrated LC Duplex Connectors and Adapters. The bayonet locking enclosure provides an easy and secured connection also under adverse conditions. The available materials for the housings are plastic, plastic metallized or nickel plated zinc die-cast for extreme harsh conditions. The LC connections are available for single mode or multimode transmission, depending on the requirements of the operated system. The major application for these connectors are connections from base stations to the transmission modules based on antenna poles or for network connections on the last mile into end users homes. This program is supplemented by preassembled patch cables in various lengths.
Request for a quoteGermany
In many areas, stud welding is considered to be the most economic fastening method for components and is sometimes even the only technically feasible solution. Because the stud is joined with the substructure over the entire surface of the stud without any hollow areas, a high strength can be achieved. STAUFF is now using this proven principle for the installation of pipe, tube, hose and cable clamps in the Standard and Twin Series (according to DIN 3015, parts 1 and 3) with M6 mounting thread, where female threaded weld studs replace the regular weld plates; distance plates made from plastic provide the necessary spacing between the clamp bodies and the substructure. If required, the system can also be adopted for alternative fastening methods, e.g. for clamping belts, cable ties or corrugated cable protection hoses. In addition to the individual components – weld studs, distance plates, clamp bodies and metal hardware required – the company also provides the correspondingly...
Request for a quoteGermany
Vacuum lifting devices standard are for the horizontal handling of plates. Transportation auf sheet metal, plastic plates, covered wooden plates or glass panes up to 2000 kg. Loading and unloading of machine tools. All AERO-LIFT vacuum lifing devices are build according the actually safety regulations EN13155. Standard lifting device AERO 350-6R Functionality and features Die Vakuumerzeugung der Vakuumheber geschieht durch wartungsarme trockenlaufende Drehschieberpumpen , ölumlaufgeschmierte Vakuumpumpen mit sehr hohem Endvakuum, druckluftbetriebene leistungsstarke Vakuumejektoren beim AERO-LIGHT oder Vakuumgebläse mit Sicherheitsnachlaufschwungmasse bei luftdurchlässigen Transportgütern. Alle AERO-LIFT-Vakuumheber haben eine nach EN13155 vorgeschriebene automatisch...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, short connection thread: M12-M63, PG7-PG42, long connection thread: M12-M63, PG11-PG29
Request for a quoteGermany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, protection class: IP54, thread: M12-M63, PG7-PG48, G 1/2"
Request for a quoteGermany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, thread: M12-63, PG7-PG48 - please have a look on our data sheet.
Request for a quoteGermany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, short connection thread: M12-M63, PG7-PG48, long connection thread: M12-M63, PG7-PG48
Request for a quoteGermany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, o-ring: NBR-Oz, protection class: IP768, range of temperature: -40 °C to +140 °C, thread: M12-M40, PG9-PG36
Request for a quoteGermany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, o-ring: NBR-Oz, protection class: IP68, range of temperatur: -40 °C to +140 °C, thread: M12-63
Request for a quoteGermany
wege® - the flexible cable gland system in brass, stainless steel and plastic. Accessories. material: brass nickel-plated, thread: M12-63, PG7-PG48
Request for a quoteGermany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, screwing insert: PE, protection class: IP54, range of temperature: -30 °C to +75 °C, connection thread: M12 - M63, PG7 - PG48
Request for a quoteGermany
wege® - the flexible cable gland system in brass, stainless steel and plastic. Accessories. material: brass nickel-plated, thread M12-M63, PG7-PG36
Request for a quoteGermany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated (screws are stainless steel), lamellar insert: PA 6, sealing ring: CR, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar / IP69k, test standard: UL 514B, range of temperature: -30 °C to +100 °C, connection thread: M12 - M32
Request for a quoteGermany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, lamellar insert: PA 6, sealing ring: CR, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar / IP69k, test standard: UL 514B, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -30 °C to +100 °C, connection thread: M12 - M63 / PG 7 - PG 29, additional information: cable in the whole clamping range can't be operated without removing the isolation (substitute product would be our wege® M Standard EMC 359.)
Request for a quoteGermany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, lamellar insert: PA 6, sealing ring: CR, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar / IP69k, test standard: UL 514B, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -30 °C to +100 °C, connection thread: M12 - M63, additional information: cable including the whole clamping range with isolation is operable. (Substitute product would be our wege® M Standard EMC)
Request for a quoteResults for
Plastic plates - Import exportNumber of results
48 ProductsCountries
Category