Results for
GLT BEARINGS GMBH
Germany
Thermoplastic all-plastic plain bearing | Maintenance-free COM-KU®/X is a self-lubricating and maintenance-free plastic plain bearing made of a high-quality plastic compound with the best sliding properties. Excellent tribological properties, especially for dry running. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Filament-wound composite bearing with self-lubricating inner | Surface backed with a high-strength | Maintenance-free | With a sliding layer of PTFE with lubricant additives COM-KU®/M is a self-lubricating and maintenance-free plastic plain bearing. Using a heavy-duty glass fibre fabric combined with a selected binder resin helps to increase the mechanical properties, pressure further and wear resistance of this bearing type. The special lubricant additives and the PTFE in the sliding layer reduce the friction coefficient, optimising the wear behaviour and thus the material's service life as a dry sliding bearing. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Fibre-reinforced compound plain bearing in wound technology | Maintenance-free | High load capacity COM-KU®/D is a self-lubricating and maintenance-free compound plain bearing. It has good sliding properties and is suitable for loads (also impact loads and with edge pressures). Good damping properties, very suitable for low sliding speeds, good chemical resistance, and long service life. Suitable as a replacement for lubricated bearings. For technical details, please visit the product page on our website!
Request for a quoteROLLON GMBH
Germany
Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...
Request for a quoteROLLON GMBH
Germany
Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GEORG H. LUH GMBH
Germany
Mineral additive for thermal conductivity with simultaneous electrical insulation With the white, mineral additive, thermal conductivities of more than 2 W/mKin plastic compounds are possible without any problems.
Request for a quoteHFP BANDSTAHL GMBH & CO KG
Germany
Our ACP Group offers over 400 different variants of stamped and lanced metal carriers. These carriers are used in a wide variety of sealing systems. Only high-quality raw materials such as steel, aluminium and stainless steel from certified suppliers are used for production. The Huehoco Group also offers a wide range of coating options. From functional to decorative coatings, our customers can choose from a wide range of products. We offer suitable bonding agents for almost all types of rubber and plastic compounds.
Request for a quoteDEUTSCHES METALLFASERWERK DR. SCHWABBAUER GMBH & CO. KG
Germany
Material: low carbon steel We offer our STAX steel fibers as short fiber according to customer specification (on special request as well as strand on reels). The Ø-fiber strength is approx. 30-50 μm. Regular analyses in our laboratory ensure the quality of our products. Main area of application for our STAX steel fibers is friction material for brakes and clutches, and as concrete reinforcement or in plastic compounds. Further we produce segment wire steel fibers for reinforcement of conrete floors for example.
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Elastomer or plastic sealing elements and also elements made of composite materials (elastomer + plastic or metal) can be compounded with metal detectable additives.
Request for a quoteDEUTSCHES METALLFASERWERK DR. SCHWABBAUER GMBH & CO. KG
Germany
Material: E-Cu58 Properties: good electrical and thermal conductivity We produce our STAX copper fibers Cu99 in the grades coarse with an average fiber strength of approx. 120 μm, medium 90 μm and fine 60 μm. STAX copper fibers Cu99 are available as following: Strand on reels with defined weight per meter and a width of 100 mm Short fibers according to customer requirement Fleece on bales with defined weight per square meter Applications for STAX copper fibers Cu99 are found in friction material as brake pads or clutches, further in plastic compounds, for shielding, in sport floors, on thatched roofs against growth of moss, as electrical and thermal conductor in different versions. If you are looking for copper fibers for your specific application, please do not hesitate to contact us.
Request for a quoteBALLERSTAEDT & CO. OHG
Germany
Preformed aluminium seals protect the product as well as the environment. They are made of aluminium-plastic compounds that provide an ideal protection against leaks and 100% tamper-proof. They can also be used to seal containers with aggressive chemicals and agro-chemicals. Their recessed shape or cap shape makes them idel for manual processing as they can easily be manually placed on the containers. Advantages reliable protection, also for aggressive products easy manual handling, self-centring
Request for a quoteBALLERSTAEDT & CO. OHG
Germany
Preformed aluminium seals protect the product as well as the environment. They are made of aluminium-plastic compounds that provide an ideal protection against leaks and 100% tamper-proof. They can also be used to seal containers with aggressive chemicals and agro-chemicals. Their recessed shape or cap shape makes them idel for manual processing as they can easily be manually placed on the containers. Advantages reliable protection, also for aggressive products easy manual handling, self-centring Delivery MOQ: 10,000 pcs per size different shapes, sizes and materials available peelable and strong-weldable specifications availbale individual logo embossing possible customer specific design possible using digital print (also small batches) Application areas Chemical industry Cosmetics industry Pharmaceutical industry Food industry
Request for a quoteHEXPOL TPE GMBH
Germany
TPE compounds for plastic closures using the in shell liner moulding process The EPSeal 800 series was developed for PE and PP closures specially designed for the in shell moulding liner technology. The series includes versions for cold fill, pasteurisation and hot fill beverage treatment systems. This series also includes versions with different rheological values to address the special processing requirements of different lining machine types. An assortment of lubricant packages addresses the spectrum of closure and liner profile designs but all lead to a neutral taste and odour sealant whilst remaining consumer friendly and reliable. Download EPSeal Product Guide
Request for a quoteMOTAN-COLORTRONIC GMBH
Germany
In the plastics compounding and manufacturing process there are many powders (all with different flow properties) which require handling. For the vacuum conveying of both free-flowing and non-free-flowing powders, motan has a solution. The METRO P series of hopper loaders are available in two versions and guarantee reliable and dust-free conveying. The METRO PC system loaders are designed to be integrated into centralised motan conveying systems. The METRO PB single loaders are designed to be used as a “stand-alone” solution. From the material source right through to the point of processing, motan offers the ideal solution for your powder handling requirements.
Request for a quoteLAUSITZ ELASTE GMBH
Germany
Rubber-plastic compounds are a good alternative to rubber-metal compounds and bring significant weight advantages.
Request for a quoteResults for
Plastic compounds - Import exportNumber of results
16 ProductsCountries
Company type
Category