Plant testing - Import export

Displacement and all mechanical values which can be converted to displacements (e.g. compressive and tensile force, strain, torque and vibration) may be measured by this DC/DC displacement sensor. Typical application areas are the measurement of displacement and strain on machines, servo systems, vehicles, on test plants, in civil engineering and tunnel construction. An integrated maintenance-free electronic and a high-level DC output signal provide an easy handling without any problems. Displacement sensors of series 87240 convert a displacement into an analog electrical signal. They consist of a differential transformer with moveable core, an oscillator and a demodulator. These components are integrated and encapsulated in a cylindrical housing made of stainless steel. The sensors are energized by DC voltage, which is converted to AC by the oscillator and brought to the primary coil of differential transformer.

Inductive displacement sensors of this series measure linear displacements and indirectly all mechanical values convertible into displacements by additional equipment (i.e. tension and compression forces, extension, torque, vibration). The sensor body equipped with a connector has an outer diameter of only 8 mm and therefore is especially well suitable for the integration in dimensionally restricted structures. Typical application fields are displacement and extension measurements on: —Machines —Servo systems —Motor vehicles —Test benches —Production plants The cylindrical case made of stainless steel, houses a differential transformer (LVDT). It consists of a primary and two secondary coils with axially moveable core. A displacement of this core changes the magnetic induction of the coils. The INLINE carrier frequency amplifier converts the displacement into a direct proportional electrical DC voltage.

OUR IN-HOUSE TEST PLANT AND LAB In order to ensure the high quality and long service life of our agitators, we have set up an in-house plant for testing our agitators. At the end of the manufacturing process, all of our agitators undergo a specific test procedure with a final test run. Here, we can test agitators with a shaft length of up to twelve meters. When designing our agitators, we use fluid mechanics simulations in our in-house laboratory. All Geppert mixing systems are delivered with O&M Manual and worldwide technical service.

The GEMÜ SUMONDO® single-use diaphragm valve consists of a diaphragm valve body and a manual or pneumatic operator. The single-use diaphragm valve body has an internally welded diaphragm. The single-use diaphragm valve body is fastened to the operator using a clamp. The valve body and the operator are locked using a defined closing and opening procedure. After use, the single-use diaphragm valve body and its diaphragm can be removed from the operator and disposed of. The operator can be used multiple times and remains in the plant. — Tried and tested actuator design — Impact resistant, corrosion resistant — The diaphragm valve body meets the purity requirements of the pharmaceutical industry (USP 85, USP 788) — Integral optical position indicator — Validation Guide on request — Gamma-sterilizable valve body

Systems & Modules SMS designs, manufactures and supplies complete systems & modules for evaporation, drying and membrane applications. Our scope of supply includes: Consulting / Feasibility Studies Pilot Test Process Design Plant Engineering Project Management Procurement / Manufacturing / Delivery Erection / Installation Start-Up / Commissioning After-Sales Service Skid-Mounted Modules For more than 40 years SMS has been supplying skid-mounted units for the benifit of our customers. The skids are fully assembled, including piping, wiring and testing in the SMS Workshop or in our partners´ workshop. The modular design significantly reduces the required amount of work for assembly and start-up which minimizes the downtime of the existing plant equipment and - as a result - just minor effects occur on the current production.

- Quality control and safeguarding - Individual test values and criteria - Customer-specific measuring and testing plants - Single measuring systems with manual assembly - Fully integrated and automated testing plants using robots - Optical, acoustic or electrical systems with/ without parts contact, data preparation, analysis Measuring and testing systems we were involved in: - Camera systems with corresponding image processing - Part recognition, positioning, color and surface examination, checking for damages - Optical / tactile / ultrasonic tests using sensors and displacement measurement systems - Leakage and pressure tests - Inspection and monitoring of filling level - Run-out properties and accuracy - Backlash measurement - Electrical tests and measurements - Electrical values, check measurements, switching and opening properties Used in all branches: e.g. pharmaceuticals industry, medical engineering, cosmetics, electronics and automotive industries.

Our services for mobile natural gas supply include the entire handling of the project, from receipt of your inquiry through preparation on-site, procurement and delivery of the gas to feed-in. We advise you on the optimum procedure, technical prerequisites and the necessary preparations on your part. Throughout all project phases, experienced staff are on hand to professionally manage and monitor the mobile supply, ensuring the highest degree of safety and efficiency. We can supply you with natural gas in the quality you require, e.g. For uninterrupted gas supply to your customers during maintenance work on your network For testing purposes in industrial companies considering switching to natural gas (e.g. in the steel, glass, porcelain and ceramics sectors) For testing purposes in plant sections where natural gas is not yet available For the initial fill and for purging of pipelines

PERO Centre of Competence in Königsbrunn in a dedicated area measuring 1,100 m², there are more than 15 separate units available for parts cleaning tests. PERO Centre of Competence in Königsbrunn in a dedicated area measuring 1,100 m², there are more than 15 separate units available for parts cleaning tests. In manufacturing plants, parts cleaning is one of the key activities along the production line. The productivity of a manufacturing plant is determined by the availability of the cleaning technology. At the PERO Centre of Competence, PERO specialists work together with operators to develop the cleaning method that best suits their needs.

In the field of minimum application unit we can offer different application units such like floating knife, mini kissroll, knifeoverroll and screen or predosed kissroll units. These units offer the following advantages compared to a traditional padder process Lowaddon technology with a fabric moisture of 60 g/sqm, lower water consumption and thus high energy savings during the subsequent drying processes, low residual liquor (2.5 litres per metre working width) and thus fewer chemicals which have tob e disposed of during a batch change. Test can be carried out at any time on our test plant in our Technology Centre in Germany.

Siempelkamp's continuous saws are a tried-and-tested solution for plants with highest outputs. The saw throughput does not depend on the number of cuts and is therefore superior to other cutting solutions, particularly for large master boards. Continuous saws also permit in-line quality grading. This means that the combined sanding and saw line is able to deliver sorted stacks of nished boards from the master boards in a single stage of work. This allows investment and operating costs to be minimised. The cut-to-size saws may be combined in-line with a sanding machine or set up separately just as a cutting system Features and functions Continuous saws for longitudinal and horizontal cuts Scoring unit and main saw blade for top-quality edges Reliable guiding of the board using chains and/or rollers to ensure accurate cutting Trimming of the edges directly by the tool, no additional conveyors and follow-up work required

Testing plants in the area of bulk material processing Innovations made by Ebbecke Verfahrenstechnik To create a product exactly according to the ideas of the customer, standardized procedures are sometimes not enough. That’s why customers come from all over Europe to Ebbecke Verfahrenstechnik AG in Central Hesse – because our engineers are prepared to develop entirely new process engineering methods. With the new and further development of procedures and machines we are at the same time opening up alternative business areas for our customers. Testing and development without financial risk With all technical developments, our engineers keep the efficiency of the processes in sight. Because one thing is clear: An innovation can only prevail on the market if the development and subsequent purchase price remain within defined economic boundaries. This is where Ebbecke Verfahrenstechnik AG has been impressing for years with its pilot plants as centers of in-house development work. Toget

In the production phase, our experienced engineers will implement our innovative ideas in turn-key plants. The close coordination between our project managers and our assembly teams ensures efficient and high-quality production results. After the successful completion of the test phase, the plant will be handed over to you. Safety certificates and declarations of conformity (CE marking) will be issued upon your request. Electrical Assembly esmo automation provides and installs electrical cabinet systems and components as per customer specifications. We will check your equipment prior to commissioning, and support you in any maintenance issues as well. Furthermore, we conduct safety checks and adapt obsolete facilities to current standards. Design + Engineering We plan and design control cabinets and create wiring diagrams for your individual applications. With the support of professional tools, such as EPLAN P8, we develop customized designs.