Plant machinery - Import export

Precision locking Clamping of machinery and plant components Locking units are used primarily as functional clamps for precision locking, but also for preventing unwanted movement. Series KFH, KFP, KB... Extensive standard range with numerous series for special applications, including outdoor, cylinders, machine tools DGUV and Lloyd’s approved series available Both load directions

One of the greatest challenges facing our society is the reclamation of valuable raw materials from electrical and electronic scrap. A global scrap volume exceeding 40 million tonnes a year – a figure forecast to double by 2025 – presents both a challenge and an opportunity. Since even in Germany only some 40% of scrap is currently fed into a waste management process, we may assume that the global rate of waste management is still substantially lower. With additional support from WEEE Directive legislation, this represents enormous growth potential for recycling companies in all consumer-oriented markets. For many years now, ERDWICH has specialised in the reclamation of valuable primary materials from electronic waste with its shredding machinery and turnkey plant solutions. As a result, economical and mature solutions are available for meeting any of these challenges. ERDWICH pre-processing: Whether you’re handling electrical/electronic waste, small/large household appliances,...

Discover the ideal companion for your winemaking - our food-safe and robust plastic vat combines quality, safety and functionality for optimum results in your wine cellar. Features of the plastic wine tub: Material: High-density polyethylene (HDPE) Colour: Burgundy red Food-safe: Suitable for direct contact with food Versatile use: Ideal for oenology and other applications in the wine cellar Temperature range: from -20°C to +100°C

The capaNCDT MD6-22 capacitive dual-channel handheld gauge is used for mobile and precise measurement of gaps. This measuring device impresses with high accuracy, intuitive operation and long battery life. Thanks to preset measurement modes, the handheld gauge is immediately ready for use. Compatible with all capacitive sensors from Micro-Epsilon, the MD6-22 is used in different measurement tasks, e.g. for rotor gap monitoring in wind turbines and alignment of rollers in plant and machinery.

The capaNCDT DT61x0/IP is an industrial-grade, capacitive sensor system for displacement, distance and position measurements. Consisting of a sensor, a sensor cable and a controller, the measuring system is ready for use without any on-site calibration. Due to its very good temperature stability, immunity to magnetic fields and robust design that is protected to IP68, the capaNCDT DT61x0/IP is used for industrial measurement tasks such as air gap measurement in generators and regulation of plant and machinery.

Demag rope hoists feature high handling rates, cost-effective operation and maximum safety. As basic hoist units for integration into plant and machinery or as lifting solutions with electronic controls that are optimized for crane applications, with our wide range of rope hoists we offer the optimum solution to meet our customers' specific requirements for efficiently lifting loads weighing up to 100 tonnes.

SCHMIDT Zerspanungstechnik manufactures machines for many different industry sectors With our high-precision machinery and qualified employees, we fabricate custom machinery and plant equipment individually tailored to the needs of the particular industry. We act as dialogue and development partner for industry in the field of mechanical and plant engineering, and our service portfolio encompasses everything from consultancy and development work and implementing precisely tailored solutions to on-time assembly and installation on site. We design and develop machinery and plant equipment for our customers that need to meet very stringent requirements. SCHMIDT Zerspanungstechnik has a very high degree of vertical integration - something that has resulted in us becoming system partner in many branches of industry. We construct machinery and plant equipment for the following branches of industry: Steel processing Automotive Defence engineering Energy technology

With maintenance-free Levelmount® machine supports, EFFBE meets the high expectations for the elastic support of machinery, plant and equipment. Thanks to our sophisticated logistics, we deliver most EFFBE parts directly from stock without delay. Nowadays, in the installation of machinery ever greater demands are placed on elastic supports: It is important to combine increased work performance with optimized production processes and greater environmental awareness, from vibration protection and noise insulation to vibration decoupling. EFFBE faces up to this challenge with maintenance-free Levelmount® machine supports, which keep rational, reliable production planning free from structural and environmental constraints. We offer vibration dampers and vibration isolators tailored exactly to your needs to reduce the transmission of vibrations - right through to vibration decoupling.

With our high-precision machinery and qualified employees, we fabricate custom machinery and plant equipment individually tailored to the needs of the particular industry. We act as dialogue and development partner for industry in the field of mechanical and plant engineering, and our service portfolio encompasses everything from consultancy and development work and implementing precisely tailored solutions to on-time assembly and installation on site. We design and develop machinery and plant equipment for our customers that need to meet very stringent requirements. SCHMIDT Zerspanungstechnik has a very high degree of vertical integration - something that has resulted in us becoming system partner in many branches of industry.

The SRF (Safety RFID) is a non-contact safety sensor, that monitors moveable safety guards, such as doors, flaps and hoods. With its innovative diagnostic system, the SRF makes safety circuits suitable for Industry 4.0. The system provides a multitude of diagnostic data of each sensor, even in a series connection, to support smart production. Diagnostic data is fed into the machine control system via I/O Link or alternatively displayed on a smartphone by way of NFC technology. In this way, 20 different diagnostic information of each sensor can be retrieved and made available. This diagnostic data delivers cost-effective predictive maintenance in a simple way. Through its advanced fault recognition capability, costly machine shutdowns can be prevented. This way, your machinery and plant will work even more efficiently!

GLOBALFLEX®-H05VV-F conrol cables have been successfully used or many decades as measuring and control cables in tool machinery, plant installation, power stations and in data equipment. GLOBALFLEX®-H05VV5-F control cables are used for forced movements in dry, moist and wet rooms (also water-oil-mixtures) but not suitable for outdoor. Extremely flexible, the GLOBALFLEX®-H05VV5-F control cables are particulary suitable for laying where there is free movement. The product correspondents to the directive 2014/35/EU (low voltage directive). EN 50525-2-51 / VDE 0285-525-2-51 approved CCC approved EAC (GOST) approved

Modular SOMOS® RDC stationary drying systems are suitable for efficiently drying virtually any kind of hygroscopic polymer pellets and regrind. The material is dried with heated drying air, optimum air distribution in the material being dried ensuring uniformly good drying results. ProTec designs and supplies RDC drying systems made to measure for all polymer processing processes. Material throughputs meet demand from individual machines right up to a plant's entire installed base of machinery.

Lift castor system for a fast and flexible placing of plant and machinery or assembly tables; gear transmission ratio: 10:1 Max. Load: 500 kg per lifting unit Material: Housing: Die-cast aluminum with PTFE bearing Roller: Plastics PA with ball bearing Roller housing: Zinc plated steel Set: 4 lifting units 1 hydraulic drive unit 4 hydraulic pipes at each 3 m, pre-filled Extras: Other sets on request

Sustainability is very important to us, so we buy back existing plants, upgrade and adapt them to customer needs Siempelkamp machines and plants go through a sustainable life cycle We buy back machines and entire plants that were in operation and adapt them to the individual needs of our customers. We modernize used plants and upgrade them to current industry-standards with increased performance. Siempelkamp offers you a wide range of pre-owned machines and plants When purchasing a plant that has been in operation, professional and cost-effective implementation of all measures - from dismantling to commissioning - are decisive processes for project success. We offer you second-hand plants for the production of particleboard, MDF and OSB with continuous press systems from well-known brands such as Siempelkamp, Küster, Bison, and Metso.

Tube Bundle Cooler for heating or cooling of low-viscosity media with a low solids content (e.g. must recooling, system separator for vegetable cooling baths, pre-cooling for spirits filtration). The heat exchanger consist of several small tubes, through wich the product flows. The several small tubes are inside a bigger shell tube and welded. Through the shell tube flows the cooling- or heating medium in counterflow to the product.

Intelligent Chain Monitoring - Gives maintenance staff time to (re)act! - No long downtimes for plant or machinery - No risk to promised delivery dates -no interruption of the logistics chain - Prevents financial losses caused by missed production - Monitoring of precision chain applications - "Plug 'n' play" principle applies – does not require calibration etc.

We build entire plants and components for your recycling process line: separating – washing – conveying – processing METZEN provides you with machinery and complete plants for plastics recycling, e.g., for agricultural films, PET bottles, mixed municipal waste and much more. We build components for every stage of your process line: separating – washing – conveying – processing

The temperature transmitter PA2530 with mit IO-Link is suitable for hygienic temperature measurement in connection with the following resistance thermometers ■ LABOM MiniTherm, Type series GA27 (see data sheet T4-014, T4-015 and T4-017) ■ LABOM Clamp-on, Type series GA2610 (see data sheet T4-028) Due to its compact design the transmitter fulfils the hygienic requirements of plant and machinery engineering.

The temperature transmitter PA2530 with mit IO-Link is suitable for hygienic temperature measurement in connection with the following resistance thermometers ■ MiniTherm, Type series GA27 (see data sheet T4-014, T4-015 and T4-017) ■ Clamp-on, Type series GA2610 (see data sheet T4-028) Due to its compact design the transmitter fulfils the hygienic requirements of plant and machinery engineering.

Features ■ Digital pressure transmitter with IO-Link V1.1 output signal ■ Data transmission rate COM 3 (230.4 kBaud) ■ Hygienic design as per EHEDG recommendation ■ Accuracy ≤ 0.3 % ■ Case and wetted parts of stainless steel, degree of protection IP 65 ■ Nominal range -400…400 mbar up to -1…100 bar ■ 2 switching outputs maximum Additional features ■ Approvals/Certificates - Material certificate per EN 10204 - Calibration certificate per EN 10204 - Roughness height rating with inspection certificate acc. to EN 10204-3.1 ■ Hygienic design ■ Wetted parts electropolished Application The pressure transmitter COMPACT with IO-Link is suited for measuring the relative pressure of gases, vapors and liquids. Due to the case design as per EHEDG recommendation and various process connections, the transmitter is suitable for the hygienic requirements of plant and machinery engineering.

There are 2 different product lines available: INDUSTRY STANDARD CHROME 90% Mirror Base paint 2k and 2k chrome 90. Chrome only 5 / 25 / 50 / 100 litres SPECIAL CHROME Colour 98% MIRROR [base 3k, chrome 1k, primer 1k]. It is a paint which is applied on a special base black 3k glossy with or without firing. Special paint for maximum mirror effect. Chrome finish in one pass a single layer Ultra-productive 5 / 25 / 50 / 100 litres ONLY 1 LITER for 14-16 m2. !!!!!!!!

The easy way to chroming: Mobile Chrome spray KIT! Information, delivery and non-binding product information form With our reasonably priced starter system, you can quickly achieve first results in chemical chrome plating. The transportable system is also suitable for use on hard to reach objects or on site at the customer. In addition to small parts such as moldings, fittings or mirrors, you can also chrome tanks, rims, lamp stands, sculptures and all sorts of surfaces. The choice of materials is almost unlimited like in our other systems. In addition to metal parts, you can easily chromed plastics, wood, glass or stone. In addition to the classic silver chrome, you can refine surfaces with black chrome or choose other shades. Whether you use reds, blues, greens, or golds, anything is possible. Since you do not need a compressor with our Hobby Chrome Spray Set, it is the ideal set for the entry into the chemical chrome plating