Piping construction - Import export

For use in floating or fixed pipelines. To handle fine and coarse-grained materials. Applications: Wet dredging, sand and gravel excavation, water to land transport pipe. Construction: Highly abrasion-resistant tube Tension and pressure-resistant special fabric inlays UV, ozone and weather-resistant, abrasion-resistant cover Interior and exterior smooth Sections cut to length with cuffed ends and/or widened hose endings or built in flanges. Other versions and dimensions on request.

Crossing of traffic routes and waterways in pipeline construction HDD Assist & Rescue Installation of protection pipes Dynamic pipe bursting Vertical applications Construction of circular support structures for tunnelling Tree relocation

We can supply pipes for the construction of pipelines, equipment and tanks subject to low temperatures as Seamless or welded pipes, hot rolled or cold finished. Pipe norms suitable for low temperatures are according to; ASTM A 333 / ASME SA 333 (seamless and welded pipes) EN 10216-4 (Seamless pipes) EN 10217-4 (Welded pipes)

The advantages to you: no more deformation of roundness when cutting bends on site easier extension-pipe/tiered pipe bend construction appealing visually pickled surface All of our pipes and pipe bends (both unannealed and annealed) are made of the following material: stainless steel pipe, material no. 1.4301 (AISI 304) longitudinal seam welded pipes hot rolled & cold rolled coils, unannealed, with or without pickling (W1) Make: IltaInox and/or Marcegaglia

Applications Pipes for the construction of pipelines for water, liquid hydrocarbons, natural gas and for the construstion of chemical and industrial plants, refineries etc. Norms Line pipes are according to the following norms: API 5L (ISO3183) (seamless and welded pipes) ASTM A53 / ASME SA53 (seamless and welded pipes) Manufacturing methods Seamless pipes, hot rolled or cold finished with following heat treatment: ERW pipes up to dia 24" and SAW pipes for the other sizes.

KB Schmiedetechnik manufactures forgings in Germany, made of European quality steel and special alloys. Drop forgings of stainless steel: corrosion-resistant, non-embrittling, seawater-suitable Drop forgings according to Pressure Equipment Directive PED 2014/68/EU, AD 2000-W0, KTA, EDF/Areva/RCC-M Boiler parts for boiler systems and vessels from former Alstom, Babcock/Borsig, CNIM, Mitsubishi/Hitachi (MHPS) and more. Keywords: Valves, valve parts, valve bodies, high-pressure valves, hydraulic valves, nuclear valves, safety valves, pipe flanges, boiler construction, pipeline construction, Y-pipes, forged pipe angles, fittings, fittings, fork pieces, pipe connections, Y-pieces, T-pieces, L-pieces, forged fittings Details: KB Schmiedetechnik, a drop forge in Western Germany, is manufacturing forgings for the construction of boiler systems including tube connections for piping like fittings, flanges and complex manifolds, offshore, marine, shipbuilding

Clamps directly on straight copper pipes ! Double seal construction withstands a vacuum of up to 1.3 x 101 Pa. Clamps direct on to a straight copper pipe eliminating unnecessary welding or flaring. Withstands a vacuum of up to 1.3 x 101Pa (when connected) making it possible to be used in leak testing, evacuation and refrigerant gas charge. Select from three standard types of seal materials to be used with fluids for air conditioner and refrigerator production lines. Many models to suit various pipe sizes. One lever operation simultaneously clamps and seals pipe. Double seal construction for tight fit on end and outside surface of pipe ensures excellent sealing and vacuum resistance.

Spiral wound gasket made of crimped metal tape with sealing wraps of non asbestos gasket material. Optional: inner and/or outer metal ring. Characteristics For flange connections in high pressure pipe line construction and fittings Extremely low leakage with PTFE spiral. Helium leakproof 10 - 8 mbar l/(ms) High temperature resistance to 550 °C with graphite spiral Media resistance: pH 0 - 14 Max. pressure load: p = 400 bar Temperature range: t = -200 to +550 °C Technical parameters pH 0 - 14 Temperature: t = -200 … +550 °C Pressure: p = 400 bar Main application High temperature and high pressure flanges Piping Pressure vessels Heat exchangers Fittings Suitable for Power plants Petrochemical plants Chemical industry Material Centerring ring OD: Carbon Steel galvanized Spiral: 316L Centerring ring ID: Carbon Steel galvanized Other material combinations on request Product Types SF 11 Spiral wound gasket without any center ring for flanges with tongue and groove connection SF...

Bomag BT 65 rammer for frequent use Fields of application: - Earthwork and asphalt construction. Pipe and conduit construction - Trench and canal construction, backfilling, foundations and repair work on asphalt. For frequent use with the highest demands on compaction results and efficiency. - Most powerful rammer in its class - Proven Honda 4 -stroke engine - Optimized full engine protection - Double air filter system - Hour meter and tachometer - On/Off safety switch for simultaneous switching on and off of engine and fuel supply in one hand movement Incl. 3-2-1 original Bomag warranty!

Split pipes made of PE-HD with snap-on system For the subsequent protection of cables, which have already been laid, or for repairing damaged pipe systems - Sealed against fine sand - Reusable - No sleeve required - Extendable to any length - The joining of the split pipes does not require any tools - A continuous pipeline is achieved by offsetting the top split pipe (no sleeves required) Use as a repair split pipe: Our 120 mm x 5,0 mm split pipe is constructed in a way that the locking mechanism is on the outside of the pipe, which means that the inner diameter of 110mm is fully usable without dimensional limitations. Therefore, the split pipe can be clamped over the defective cable conduit like a plaster over a wound. You don’t need to saw off the damaged pipe section! Standard design: Material: PE-HD Locking system: snap-on locking Colour: black Length: 3 m

Split pipes made of PVC-U with snap-on locking For the subsequent protection of cables, which have already been laid, or for repairing damaged pipe systems. - sealed against fine sand - reusable - extandable to any length - the joining of the split pipes does not require any tools - a continuous pipeline is achieved by offsetting the top split pipe (no sleeves required) Use as a repair split pipe: Our split pipe is constructed in a way that the locking mechanism is on the outside of the pipe, which means that the inner diameter of 100 mm is fully usable without dimensional limitations. Therefore, the split pipe can be clamped over the defective cable conduit like a plaster over a wound. Standard design: Material: PVC-U Locking system: snap-on lock Colour: grey Length: 3 m Possible designs: Length: 1 m to 3 m Colour: special colours are available on request Labelling: acc. to customer specifications

This PERKUTE cleaning system cleans simply and effectively with a very confined cleaning space. The machine is easily loaded by using either a crane or a loading carriage to place the items to be cleaned on the platform. A noticeable feature of the FR cleaning machine is that it offers several simultaneous work process. The PERKUTE-system: economically - environmental – effektive Basic equipment Made of stainless steel Simple operation Space-saving Tank cover, filter basket incl. Low water pressure switch as dry-run protection Suction filter made of stainless steel in front of the pump Adapter for steam extraction Minimum operational costs because of housing insulation in sandwich construction Rotationg blast pipe system incl. fan nozzles Adjustable feed Pneumatic lift gate Programmable electronic control

The exclusive MASTER 3 sound-insulating drain system from SANHA consists of high-quality three-layer pipes and modern fittings. The drain pipes are constructed with three perfectly matched layers that work together to meet all the demands that a drain system is subjected to in the construction of a modern house, apartment and industrial building. Each layer optimises the properties of the pipe: The smooth inner layer prevents encrustations and is partly responsible for the good sound insulation properties. The solid middle layer is extremely robust and the brown outer layer provides excellent impact resistance even at low temperatures. The sealing ring consists of styrene-butadiene rubber (SBR).

Washing machine installation box with through-flow circulation pipes for drywall construction, with thermally insulated and condensate-proof insulating body, with 1 internal thread Rp 1/2 and 2 MultiFit-Flex system pipe connections 16 mm and drain connection 50 mm 50 mm, dimensions 270 x 350/430 x 70 mm