Pipe cleaning - Import export

Properties: SYSTEM-CLEANER is a cleaning concentrate which has been specially developed to eliminate organic and inorganic dirt like mucus, residual medication and incrustations in drinking water systems for poultry, pigs and bovines. Application: SYSTEM-CLEANER is particularly suitable for the cleaning of pipe systems, containers, tanks and drinking systems for the animals. Rinse thoroughly with water after use. overall cleaning :2-5 % for 6-12 hours

High-pressure cleaning and surface preparation with water requires precise management of the water jet. This precise management is necessary to ensure that the required result (e.g. surface finish) is achieved within a reasonable time. The method must be safe and fatigue free. With this in mind, we offer a specially designed and manufactured range of high pressure guns with electrical or mechanical control. The exceptional ergonomics of these tools have been achieved through innovative detail solutions: For example, our high-pressure guns are equipped with a special swivel handle that transmits any torque to the wrist. In addition, the hose connection can be swivelled in all directions, allowing optimum hose routing for all working situations. Our range of high pressure guns is complemented by various versions of foot valves, rotating gun lances, rotating nozzles and other accessories for a wide variety of applications, such as pipe cleaning.

Short description: The ideal tool for all-round cleaning smaller lines The cleaning nozzle is used for all-round cleaning operations in smaller lines up to 400 mm in diameter. This light nozzle has patented fluid mechanics (patent no.: DE 19516780) and two different jet angles. With its eight nozzle inserts it slides in the pipe. The cleaning nozzle goes around bends and is successfully used in difficult pipes.

Short description: The solid nozzle for everyday use The sewer nozzle is best suitable for a heavy everyday operation. With its 10 to 12 nozzle inserts and two different jet angles it is primarily used for the all-round cleaning of pipes up to 800 mm in diameter. The sewer nozzle has patented fluid mechanics (patent no.: DE 19516780) and is made of highly wear-resistant special steel. This universal nozzle of heavy construction is characterized by high efficiency and absolute reliability. It is an efficient and low-cost alternative to the conventional standard products.

The highpressure pumps of the 2series with operating pressures up to 750 bar and volumetric flow rates up to around 230 l/min are ideal for cleaning pipes and tube bundles, containers and containers.The seal system of this plunger pump is very easy to maintain due to fewer wearing parts. The ceramic plungers used are highly resistant to acid and alkaline liquids. The 2series impresses with a good price/performance ratio due to long service lives – even in rough everyday work.

The application fields of the EcoMaster D 150Z Classic are the internal cleaning of tanks, containers or autoclaves, as well as the cleaning of large pipes. All Classic devices are fitted with robust, low maintenance and strong performance WOMA high pressure pumps. The compact design with stable frame construction enables easy usage in difficult areas. Fitted with crane hooks a simple transportation is guaranteed. Effortless regulation via optional manual pressure control or Dump Gun is possible and the large water tank ensures a calm water cycle. The Ecomaster Clasicseries brings a very good price performance ratio thanks to functional construction and proven mechanical components combined with low operational costs due to high service life, minimal maintenance costs and simple servicing.

The FERRET pipe cleaning machine is a user-friendly and handy tool for cleaning horizontal and vertical flue gas pipes. This eliminates the need for strenuous cleaning with brushes on a rod or awkward fiddling with rotating shafts. This significantly reduces the cleaning time. The FERRET machine is driven pneumatically. The oscillating brush propels the machine forward automatically and ensures an excellent cleaning result. Air consumption is low. A work area of approx. 0.5 m in front of the boiler is more than sufficient. Use the FERRET machine to clean your flue gas pipes up to a residual temperature of 150 °C. The use of special vacuum cleaner nozzles means that work is carried out virtually dust-free.

The STAUFF Clean System comprises of a pneumatic launcher and a range of specially designed nozzles and projectiles. The launcher uses standard industrial compressed air pressure between 6 and 8 bar / 87 and 116 PSI to propel a foam projectile through the nozzle and into the pipe, tube or hose bore to have their inside surface cleanedfrom any unwanted contamination. This provides a safe and environmentally friendly tool that requires little formal expertise to operate and apply. The launcher is the part of the system that controls the air supply to propel the projectile from start to finish of the cleaning job. The nozzles are specially designed to affect an airtight seal on any pipe, tube or hose with or without end fittings. Its main purpose is to compress the foam projectile allowing it to enter the internal diameter of the pipe, tube or hose to be cleaned. The projectile is the part of the system that does the cleaning: The foam projectile is sized to be approximately 15 %...

The divisible corrugated conduits from FRÄNKISCHE Industrial Pipes offer the perfect solution for retrofit application of cable protection, also pre-assembled cable harnesses with already installed connectors. This divisible conduit type is suitable for applications in which cables or pipelines have to be marked separately. The suitable accessories from FRÄNKISCHE Industrial Pipes enable clean laying and fixing of pipes that are safely protected by FIPSPLIT - divisible corrugated pipes.

The GP 150 consists of a modular cage system with variable width and height for large profile channels (circular, egg, box profiles as well as profiles with dry weather channel). It is designed to enable the user to process a corresponding profile size with as few components and assembly work as possible. With only five plug-in connections and three screw connections, a maximum body size of DN 4,000 can be achieved.

The PowerJet series with single or double jet is particularly suitable for cleaning water-bearing pipes and ducts. The increase in working performance with low energy input is due to the novel implementation of the available performance variables such as pressure and volume flow. Even with a volume flow of 280 l/min. and 130 bar, large quantities of loose material (stones, sand, sludge and paper/cellulose) can be transported efficiently. This cleaning method also makes it easy to maintain and preserve old sewer systems (the latter is in line with municipal requirements). Any industrial water can be used to drive the system. The use with water recovery is problem-free.

Pipe cleaning systems are designed according to the processing requirements. Here the machine line length changes equivalent to the throughfeed speed. An alkaline cleaning station that adjusts to the individual degree of soiling of the pipe surface to ensure optimum results can be optionally installed together with a drying unit upstream of the pipe coating line.

The Drakula universal cleaning nozzle made of case-hardened VA steel with large jet angles for pipe and sewer cleaning is particularly suitable for standard cleaning.

The standard nozzles made of partially hardened VA steel, are best suited for standard cleaning of smaller pipes and house connections.

The standard nozzles made of partially hardened VA steel, are best suited for standard cleaning of smaller pipes and house connections.

The Tristar poke nozzle is one of the absolute bestsellers in pipe and sewer cleaning. It was specially designed for the removal of blockages or root and soil compression. Optimum use is guaranteed by the four pre-jet nozzles in conjunction with the machined cutting surfaces.

Especially in the field of shipping, CYTOCLEAN® makes a significant contribution to the effective and cost-effective compliance with the applicable environmental standards with its diverse and wide range of uses, as well as the unique possibility of cleaning during the ship's journey. In shipping, CYTOCLEAN® is used in tank, pipe and hatch cleaning. CYTOCLEAN® has also made a name for itself as an effective and environmentally friendly product when it comes to cleaning and maintaining boilers or filters. In the mineral oil and processing industry, CYTOCLEAN® is the environmentally friendly solution when tank wagons, storage and service tanks or oily industrial plants, or e.g. Steel plates or finished products are to be successfully freed from oil residues. Because of the many possible uses of our CYTOCLEAN® process, it is unfortunately not possible to show the full range of possible applications in detail.