Results for
WEINLICH GMBH & CO. KG
Germany
We mount engines to be tested under load or not under load, according to your requests, and ready to start. Wether these engines are provided by us or by you is irrelevant.
Request for a quoteERC ADDITIV GMBH
Germany
- for older generations of gasoline engines - protects against corrosion and deposits - enhances lubrication THE EFFECT Older-generation vehicles are often laid up for long periods after the summer season has finished. Moisture from the air and water precipitated out of the fuel then actively promote corrosion in the fuel tank, fuel lines and the interior of the engine. Old fuels can cause deposits, impairing fuel flow and injection performance. Fouled nozzles, inlet ports and valves thus impair engine performance, raise pollutant emissions and increase consumption. The introduction of low-Sulphur fuels also lessens the lubricant action on the injection and fuel system. The consequence: Increased wear. ERC Oldtimer Performance Additive protects against corrosion, increases the fuels lubricant action and prevents the formation of new deposits. It thus ensures engine reliability, combined with optimized consumption, particularly in older vehicles.
Request for a quoteERC ADDITIV GMBH
Germany
THE EFFECT Deposits on the valves and on the surfaces of the injection jets reduce the fuel flow and lead to a drop-in injection performance. The result of these deposits are increased fuel consumption, a higher level of exhaust emissions, as well as uneven engine running. The fuel-air mixture cannot form properly. Engine performance suffers accordingly. The highly concentrated ERC Valve/Fuel System Cleaner removes deposits from valves, from the injection jets and other fuel system components. THE ADVANTAGES AT A GLANCE - Removes reliably deposits especially from inlet valves, injection jets as well as from other injection system components - Improves reliability and fuel consumption - Restores full engine performance and ensures environment-friendly combustion
Request for a quoteERC ADDITIV GMBH
Germany
THE EFFECT: Lead compounds are added to the fuel in order to prevent engine pinking and valve damage. Older cars therefore have to run on leaded fuel some or all the time. THE ADVANTAGES AT A GLANCE: - Forms a protective layer on the valve heads and valve seats - Protects outlet valves against wear - Works against deposits on valves and sparking plugs - Protects the environment by lead-free operation ERC Lead Substitute is designed for regular application and for all grades of unleaded petrol. Dosing 1:1000/concentrate (e.g. content of 250ml-dosing bottle is sufficient for 250 liters petrol fuel).
Request for a quoteERC ADDITIV GMBH
Germany
The ERC bike fuel system cleaner reduces the susceptibility of modern engines to design-related and operational-related build-up on parts of the valves coming into contact with fuel, on the fuel system, and on the injection system. The Effect Deposits on valves and the surface of the nozzle needle tip reduce the flow of fuel and diminish peak performance. These mixture deposits lead to higher emissions of harmful substances, increased wear, and irregular engine running. The mixture formation is disturbed and the operating behaviour of the engine is worsened. The high-concentration ERC bike fuel system cleaner breaks down build-up on the valves, in the fuel system, and on the injection nozzles. The Result The longer the engine is operated with fuel without additives, the greater the accumulation of deposits and the greater the resulting flow reduction. The use of bike fuel system cleaner removes the build-up on valves and the fuel system and restores the optimal fuel flow.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Inch size petrol hoses for injection engines and carburetor engines. With or without galvanized steel casing
Request for a quoteINOX VERTRIEBS GMBH
Germany
INOX® Nano engine protection can be used in all diesel and gasoline engines, both for common rail and pump nozzle and is recommended for engines with turbo, catalyst and soot filter. The product improves engine performance, has a noise-reducing effect and provides highly active wear protection as well as a smooth engine operation.
Request for a quoteINOX VERTRIEBS GMBH
Germany
INOX PETROL LEAD SUBSTITUTE 1:1000 contains a specially tailored additive combination for older gasoline engines having valve seats requiring leaded gasoline for lubrication. Valve seat wear will be prevented by the optimal lubrication properties. It prevents loss of compression and thus loss of performance and engine damage.
Request for a quoteINOX VERTRIEBS GMBH
Germany
INOX Valve & Injection Nozzle Cleaner can be used for all gasoline engines. It dissolves carbonization on valves, inlet area and in the combustion chamber and removes deposits in the entire gasoline injection system. At the same time, the cleaner ensures powerful, clean combustion and optimizes exhaust gas values and injection metering. This results in a longer service life, optimal engine protection and smoother engine running. Applicable for all gasoline engines guarantees optimal injection metering and fuel atomization improves starting behavior and engine performance dissolves carbon deposits on valves, inlet area and in the combustion chamber removes deposits from the entire fuel injection system powerful and clean combustion, optimizes the exhaust gas values guarantees optimal injection metering and fuel atomization longer service life, optimal engine protection, easier and smoother engine running
Request for a quoteINOX VERTRIEBS GMBH
Germany
INOX Petrol Power is suitable for all normal and premium petrol engines. It dissolves dirt and resin buildup in the entire fuel system and reliably removes all carbon residues and soot deposits. The service life of the engine is increased. Dissolves contamination and gumming in the entire fuel system clean combustion more gasoline power for all normal and premium petrol engines Reliably removes all carbon residue and soot deposits ensures clean and powerful combustion regulates the PH value in the fuel system improves exhaust emissions removes moisture and condensation from the entire fuel system lubricates and protects the upper cylinder area increases the lifespan of the engine
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Aral EcoTronic F 5W-20 is a high-performance engine oil using Aral synthesis technology specifically developed for the Ford EcoBoost engines, which require an engine oil in accordance with the Ford WSS-M2C948-B specification. The product can also be used in many other modern Ford petrol engines that require engine oil of the Ford WSSM2C913-B, WSS-M2C913-C or WSS-M2C925-B specification (with the exception of Ford Ka, Focus ST and Focus RS). . The innovative additives in the Aral EcoTronic F 5W-20 offer excellent wear protection and additional potential for fuel savings. Application In addition to the applications already mentioned, Aral EcoTronic F 5W-20 can also be used in engines
Request for a quoteLALK GMBH &CO. KG
Germany
The versatile joint cutter CF 13.3 is particularly useful for light road repairs and for gardening and landscaping, especially due to his possibility of quickly and easily changing the cutting side. It features a reliable Honda GX-390 gasoline engine with cyclone air filter and a power of 8.7 kW. The cutting depth is up to 170mm and can be adjusted with a hand crank. The vibration-free push handle is also adjustable to provide comfortable handling of the machine.
Request for a quoteINOX VERTRIEBS GMBH
Germany
INOX® fuel system hybrid cleaner can be used for all hybrid vehicles with gasoline engines. It fights soiling and condensation that occur due to the typically irregular short-term operation of hybrid vehicles. The product also combats the negative effects of fuel aging which is more common in hybrid vehicles. INOX® fuel system hybrid cleaner removes adhesions as well as coking residues, resinification and soot deposits in the entire upper cylinder area.
Request for a quoteINOX VERTRIEBS GMBH
Germany
INOX® engine cleaner performance is suitable for all gasoline / diesel engines, gearboxes and differentials. It dissolves dirt and resin build-up in the entire oil and lubrication circuit. Harmful engine acids will be neutralized and oil and fuel consumption reduced.
Request for a quoteINOX VERTRIEBS GMBH
Germany
INOX fuel system cleaner can be used for all gasoline engines. It dissolves dirt and resin buildup in the entire fuel system and reliably removes all coking residues and soot deposits. This increases the service life of the engine. optimizes emissions values binds condensation Dissolves contamination and gumming in the entire fuel system Reliably removes all coking residues and soot deposits ensures clean and powerful combustion removes moisture and condensation from the entire fuel system lubricates and protects the upper cylinder area increases the lifespan of the engine
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
ARAL HighTronic M 5W-40 is a high-performance engine oil in Aral synthesis technology for demanding driving conditions in gasoline and diesel vehicles from the following vehicle manufacturers, among others: at Mercedes Benz for cars with gasoline and all diesel engines without particle filters, excellently suitable for most AMG and Brabus vehicles For petrol and diesel engines, including those from the VW Group Specifications ACEA A3/B4 API SP MB approval 229.3/ 229.5/ 226.5 VW 502 00/ 505 00 BMW Longlife-01 Porsche A40 Renault RN0700 / RN0710
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
ARAL HighTronic M 5W-40 is a high-performance engine oil in Aral synthesis technology for demanding driving conditions in gasoline and diesel vehicles from the following vehicle manufacturers, among others: at Mercedes Benz for cars with gasoline and all diesel engines without particle filters, excellently suitable for most AMG and Brabus vehicles For petrol and diesel engines, including those from the VW Group Specifications ACEA A3/B4 API SP MB approval 229.3/ 229.5/ 226.5 VW 502 00/ 505 00 BMW Longlife-01 Porsche A40 Renault RN0700 / RN0710
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
DIERMEIER ENERGIE GMBH
Germany
ARAL HighTronic M 5W-40 is a high-performance engine oil in Aral synthesis technology for demanding driving conditions in gasoline and diesel vehicles from the following vehicle manufacturers, among others: at Mercedes Benz for cars with gasoline and all diesel engines without particle filters, excellently suitable for most AMG and Brabus vehicles For petrol and diesel engines, including those from the VW Group Specifications ACEA A3/B4 API SP MB approval 229.3/ 229.5/ 226.5 VW 502 00/ 505 00 BMW Longlife-01 Porsche A40 Renault RN0700 / RN0710
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Aral EcoTronic F 5W-20 is a high-performance engine oil using Aral synthesis technology specifically developed for the Ford EcoBoost engines, which require an engine oil in accordance with the Ford WSS-M2C948-B specification. The product can also be used in many other modern Ford petrol engines that require engine oil of the Ford WSSM2C913-B, WSS-M2C913-C or WSS-M2C925-B specification (with the exception of Ford Ka, Focus ST and Focus RS). . The innovative additives in the Aral EcoTronic F 5W-20 offer excellent wear protection and additional potential for fuel savings. Application In addition to the applications already mentioned, Aral EcoTronic F 5W-20 can also be used in engines for which the manufacturer recommends or requires an engine oil in accordance with API SN or ILSAC GF-5 or their previous specifications with
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Aral EcoTronic F 5W-20 is a high-performance engine oil using Aral synthesis technology specifically developed for the Ford EcoBoost engines, which require an engine oil in accordance with the Ford WSS-M2C948-B specification. The product can also be used in many other modern Ford petrol engines that require engine oil of the Ford WSSM2C913-B, WSS-M2C913-C or WSS-M2C925-B specification (with the exception of Ford Ka, Focus ST and Focus RS). . The innovative additives in the Aral EcoTronic F 5W-20 offer excellent wear protection and additional potential for fuel savings. Application In addition to the applications already mentioned, Aral EcoTronic F 5W-20 can also be used in engines for which the manufacturer recommends or requires an engine oil in accordance with API SN
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Low-friction engine oil with Aral synthesis technology. Aral BlueTronic II SAE 10W-40 can be used in gasoline and diesel engines (including turbocharged engines) used in cars or light commercial vehicles. Specifications ACEA A3/B4 API SP Meets - Fiat 9.55535-D2 MB Approval 229.3 VW 5 01 01 / 505 00
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Low-friction engine oil with Aral synthesis technology. Aral BlueTronic II SAE 10W-40 can be used in gasoline and diesel engines (including turbocharged engines) used in cars or light commercial vehicles. Specifications ACEA A3/B4 API SP Meets - Fiat 9.55535-D2 MB Approval 229.3 VW 5 01 01 / 505 00
Request for a quoteINOX VERTRIEBS GMBH
Germany
INOX oil booster system care is suitable for all 4-stroke, gasoline and diesel engines. It has been optimized for usage in vehicles with soot particle filters, has a reduced phosphate content, uses ash-free ingredients and is free from heavy metals.
Request for a quoteINOX VERTRIEBS GMBH
Germany
INOX® hydraulic valve lifters care can be used in all gasoline and diesel engines. It cleans the hydraulic valve lifters and eliminates unpleasant rattling noises. It ensures optimal functioning of the hydraulic valve lifters, less wear and tear and improved cold start behavior.
Request for a quoteINOX VERTRIEBS GMBH
Germany
INOX Oil Loss Stop can be used in all petrol, gas and diesel engines. Abrasion and wear will be significantly reduced ultimately leading to a reduction in oil consumption. INOX Oil Loss Stop can be mixed with all commercially available oils.
Request for a quoteINOX VERTRIEBS GMBH
Germany
INOX® engine cleaner is suitable for all gasoline / diesel engines, gearboxes and differentials. It dissolves dirt and resin build-up in the entire oil and lubrication circuit. Harmful engine acids will be neutralized and oil and fuel consumption reduced. INOX® engine cleaner protects the entire engine system and increases the service life its units.
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
BlueTronic II 10W-40 (09/01/2022) Engine oil with Aral synthesis technology Description Low-friction engine oil with Aral synthesis technology. Aral BlueTronic II SAE 10W-40 can be used in gasoline and diesel engines (including turbocharged engines) used in cars or light commercial vehicles. Specifications ACEA A3/B4 API SP Meets - Fiat 9.55535-D2 MB Approval 229.3 VW 5 01 01 / 505 00
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Aral BlueTronic 10W-40 (June 1, 2018) Engine oil with Aral synthesis technology Description Low-friction engine oil with Aral synthesis technology. Aral BlueTronic SAE 10W-40 can be used in gasoline and diesel engines (including turbocharged engines) installed in cars or light commercial vehicles. Specifications ACEA A3/B4 API SN MB approval 229.1 VW 501 01 / 505 00 Meets Fiat 9.55535-D2
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Aral BlueTronic 10W-40 (June 1, 2018) Engine oil with Aral synthesis technology Description Low-friction engine oil with Aral synthesis technology. Aral BlueTronic SAE 10W-40 can be used in gasoline and diesel engines (including turbocharged engines) installed in cars or light commercial vehicles. Specifications ACEA A3/B4 API SN MB approval 229.1 VW 501 01 / 505 00 Meets Fiat 9.55535-D2
Request for a quoteResults for
Petrol engines - Import exportNumber of results
31 ProductsCountries
Company type