Personal protection - Import export

The HICPRO is the ultimate portable device for measuring HIC values (Head Injury Criterion). All the measurement and IT technology required to determine the head injury factor is included in the device. The data obtained can be displayed directly on the device or transferred to a PC, tablet or smartphone via WIFI or USB. The device can be easily used to check the safety of floor coverings on playgrounds, in fitness centres or climbing gyms, for example. We can also offer you the systematic and certified testing of your surfaces as a service.

Secure restraining in case of pressure drop Personal protection and accident prevention Safety Catchers are used wherever heavy lifted loads have to be secured against falling or accidentally dropping. Series K, KR, KRP ... For medium-sized, large and very large loads DGUV-approved One load direction

• The aluminium hard hat bracket fits the MSA V-Gard; Centurion Vulcan 12 and 25 and UVEX AIRWING helmets • The bracket is easy to attach to the hard hat • Secure fit on the hard hat due to a powerful tension spring • The bracket is made of robust aluminium profiles and is heat and corrosion resistant • The broad overlapping of the profiles ensures a good seal at the top • The face shields can be lifted into 4 positions • The face shields are attached with a rotating fastener

• Face shield to protect against class 2 (7kA) arcing faults • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The face shield is used with a head gear (GFKKH200) • The visor is manufactured from 2,0mm-thick Polycarbonate • It has excellent optical qualities • High impact strength • Good UV-protection

• Face shield to protect against class 1 (4kA) arcing faults • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The face shield is used with a head gear (GFKKH200) • The visor is manufactured from 1,5mm-thick Polycarbonate • It has excellent optical qualities • High impact strength • Good UV-protection

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to+135°C • Good UV protection • 94% of the radiant heat is reflected by the gold layer • IR-protection shade 4-6

• The aluminium hard hat bracket with cover fits all standard hard hats • The bracket is easy to attach to the hard hat • Secure fit on the hard hat due to a powerful tension spring • The bracket is made of robust aluminium profiles and is heat and corrosion resistant • The broad overlapping of the profiles ensures a good seal at the top. The cover provides an additional seal against dust and debris • The face shields can be lifted into 4 positions • The face shields are attached with a rotating fastener or with a clip fastener

• The aluminium hard hat bracket fits current full brim helmets (Schuberth SUP) • The bracket is easy to attach to the hard hat • Secure fit on the hard hat due to a powerful tension spring • The bracket is made of robust aluminium profiles and is heat and corrosion resistant • The broad overlapping of the profiles ensures a good seal at the top • The face shields can be lifted into 4 positions • The face shields are attached with a rotating fastener

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to+135°C • Good UV protection • 94% of the radiant heat is reflected by the gold layer • IR-protection shade 4-5

FFP2 Face Mask in white or black: Made in Germany in top quality. Features of the FFP2 mask Reliable self and respiratory protection (!) German origin "MADE IN GERMANY", production in Germany with materials from Germany Enormous filter performance, over >98 % according to test criteria of EN149:2001+A1:2009 Optimal breathing comfort - low breathing resistance, no shortness of breath, no difficult inhalation or exhalation Meets the requirements of the Personal Protective Equipment Regulation (EU) No. 2016/425 CE certified according to EU standard EN149-2001+A1:2009 Shelf life is 3 years from production date Free of harmful substances and glass fibres,

Where to buy the best goggles? If you are a bit confused, just opt for the Ronix RH-9028 model. The Ronix RH-9028 is an inexpensive goggle that offers maximum protection in all conditions. To do this, they are made from a flexible PC body for long-lasting comfort. They are also anti-fog, wind, and sand resistant to protect you from dust and water. Compatible with other personal protective equipment, the Ronix RH-9028 has padded temples and nose bridges that offer an optimal fit. Plus, they guarantee 99% absorption of UVA, UVB, and UVC rays between 290 nm and 400 nm

The SK safety position switch is an industry standard and can be used in virtually any application. Its versatility is improved by the variable actuator head and two actuator openings. The design safety attributes befitting to VDE 0660 T200, IEC 60947-5-1 and the test regulations GS-ET 15, the SK is particularly qualified for personal protection applications. Actuators can be repositioned by 180 degree. Two actuators openings which designs horizontal as well as vertical operation possible. This product has a high standard quality and very reliable as well as user friendly device. Additionally, had meet the requirements for its excellent quality.

HUBTEX offers various accessories for your industrial trucks in addition to the vehicle-specific equipment. These accessories are purchased from well-known suppliers unless they are manufactured in in-house to our own design. Below you will find a choice of the most important components. Mobile Person Protection System (PSA)

New Gas Generator to check personal Gas Detectors A 100% Test in just 10 Seconds Personnel working in chemical plants protect themselves with personal gas detectors from gas exposure. Gas leaks are very unlikely to occur, so the gas detector will always display „0“. An instrument displaying zero can do so for two reasons: a) The concentration is zero. b) The instrument is defective. For good reasons a daily check of the instrument is mandatory. It would be too time consuming to perform a complete calibration every day. The daily functional test with the gas generator makes sure that no instrument failure caused by abuse or wear and tear will go unnoticed. To perform a test, it is sufficient to expose the sensor to a short puff of gas and see if the instrument gives an alarm. To make this test as fast, easy and cheap as possible, no accurate gas concentration is used, but approximately twice the value of the alarm threshold. The gas generator stops gas generation after 10 seconds automatically. If the detector fails to alarm within this time interval it is not safe to be used. The amount of gas produced when activated is very small. Therefore no restrictions regarding transportation and storage of the gas generator apply.

This high-quality metal locker (650 x 400 x 350 mm) offers reliable protection for your PPE fall protection kit and is designed for wall mounting. There is a rod inside which allows you to hang your kit up. 2 keys are included in the package. For PPE storage 650 x 400 x 350 mm Incl. 2 keys

Particularly robust self-retracting lifeline (SRL) with a steel cable - available in a range of maximum expandable lengths up to 30 m. Rope-up protection for 1 individual in combination with personal protection equipment (PPE). EN 360:2002 Strength rating: 12kN Upper and lower rotating brackets prevent twisting Carabiner equipped wtih a fall indicator

Specially designed for working on mobile elevating work platforms (in accordance with CNB/P 11.074), this lanyard is based on a robust strap and includes an integrated energy absorber, a carabiner hook for attaching the lanyard to your personal protection kit and a pipe hook. Is it 1.8 m long and can be flexibly adjusted. For individuals weighing up to 140 kg. EN 354:2010 & EN 355:2002 CNB/P 11.074 (for implementation on a mobile elevating work platform) Adjustable length: 1.4 m - max. 1.8 m Max. 140 kg (incl. the user's clothes and equipment!)

Broad experience in nuclear technology More than 5 decades of know-how: From planning and operation to the dismantling and decommissioning of nuclear facilities Siempelkamp NIS Ingenieurgesellschaft has been successfully operating in the nuclear environment for five decades and is considered an established supplier of products and services for nuclear plants. Our specialists plan and support the dismantling/decommissioning, new construction and operation of nuclear facilities Our product and service portfolio for nuclear technology at a glance Decommissioning and dismantling of nuclear facilities (planning, implementation and dismantling technology) Equipment for nuclear installations Calculations of the decommissioning costs of nuclear installations Waste management, residual waste treatment and decontamination Personal dosimetry and radiation protection management Nuclear physics

ENHA’s Ranger helmets reflect the company’s indepth understanding of customer needs and its ability to address demand through product innovation. They are awardwinning, exceed the demands of EN 397 and include innovative features that are revolutionising the head protection market. Such features include the Crashbox as well as patented oval shaped slots on the side of the helmet which refrain from cracking should permanent pressure be applied from the personal protective equipment attached.

This set is suited for momentary, personally protection against slightly radioactive particles in the surrounding: With measurements in radioactive areas Personal protection during evacuations (of population) Consisting of following : High-quality disposable protective suit Effective half mask P3 1x pair comfortable disposable gloves Unventilated goggles 1x pair over gloves with sole 1x rubbish sack of plastic The set are packed/delivered space-saving into a transparent bag (while stock lasts)

"Special features: ›Innovative 1-layer filter material instead of the standard 3-layer material with a significantly lighter weight of ≤ 45 [g / m2] ›Production site: Lichtenau in North Rhine-Westphalia ›Use of 100% renewable energies (RE) in the production process Description: Innovative 1-layer filter material instead of the commercially available 3-layer material with a significantly lighter weight of ≤ 45 [g / m2], Production site: Lichtenau in North Rhine-Westphalia, Use of 100% renewable energies (RE) in the production process. Main features: Particularly suitable due to its pleasantly soft comfort in the common folding design, High quality and skin-friendly material, completely hydrophobic, does not allow liquids to pass through and enables easier breathing, Anatomically adaptable shape with nose clip and elastic ear straps (not latex-free). Instructions for use: For private use only. Not a medical device or personal protective equipment.

The CE-certified FFP2 respirator mask is a specially developed premium mask tailored to the needs of staff in the hospital and care sector. The particularly gentle ear straps are hardly noticeable. The new composition of filter materials enables an even lower breathing resistance during the entire wearing time. • Respirator mask with CE marking, meets the test standard EN149:2001+A1:2009 of protection class FFP2 (PPE = personal protective equipment) • 100% Made in Germany.​ • 5-ply mask • folding mask without valve, • Suitable for hours of professional use