Paint remover - Import export

Dissolving of a wide range of sealants and adhesives such as polyurethane residues, materials containing epoxies Elimination of oily and greasy soiling Removal of bitumen and tar splashes Dissolving of labels and adhesive strips Removal of paints on a PMMA and PU resin basis from metal surfaces Advantages and benefits Good infiltration of adhesive films allows easy removal of the residues from the surface Good washable with water after use Applicable to surfaces of metal, stainless steel, glass, wood, ceramics. Do not apply on sensitive materials such as PVC, PS or on painted surfaces Low effect on the climate and no negative influence on the ozone layer (ozone-depleting potential: ODP = 0) Free of surfactants, halogenated and aromatic solvents

Hand brushes with wooden cores are available in a variety of widths (multiple rows). Strip-type hand brushes have a slimmer working surface for precision work, specifically on the cavities in profiled surfaces. Hand brushes help in cleaning, derusting, paint removal and polishing processes.

Kullen Koti End, Cup and Bevel brushes give a gleaming finish to oxidised or coated metal surfaces. They are all-rounders in drilling machines, on angle grinders and in machining centres, performing such tasks as removing paint, scale and corrosion. They are also ideal for use in places which are difficult to get at, and were specially developed for the processing of edges and corners.

Cleaning discs FAPI-CLEAN provide very good results when grinding and cleaning metal, stainless steel, wood or plastic and can therefore be used as a preliminary stage for grinding/polishing. We will be happy to advise you by telephone or at your site whether the use of cleaning discs FAPI-CLEAN also makes sense in your company for your processes. Construction Cleaning discs FAPI-CLEAN consist of knitted nylon threads which have been soaked in synthetic resin and gently cured. They are available on fabric plates and for use on straight and shaft grinders. Applications The cleaning discs are suitable for cleaning and polishing all surfaces. Scratch-free removal of paint, rust, scale and welding spots from metal Cleaning wood and plastic Remove paint from wood Free stainless steel from blue colouring Dimensions For cleaning discs FAPI-CLEAN the principle applies that they may only be used in conjunction with a clamping shank. Notice: For cleaning discs, the principle applies...

The following list is only a sample of our capabilities. We are happy to give you information and advice on other product options - please contact us! Screen cleaning wipes without alcohol (also for laptops, smart phones, navigation systems, etc.) Lens cleaning wipes (suitable for all glasses, also those made ​​of plastic and sunglasses) Disinfectant wipes for surfaces (as well as skin and hands) Stainless steel care wipes (with anti-finger print) Descaler sachets (powder or liquid) Colour removal wipes (for removing colours, including paints from skin and hands) Stain removal wipes (to remove food stains from textiles) Rubber and plastic wipes Polishing cloths Glass cleaning wipes Jewellery cleaning cloths (for gold and silver jewellery) Shoe cleaning wipes

Our Surface Cleaner 3000 air is an extremely powerful high pressure cleaner. It is capable of cleaning at pressures of up to 3,000 bar. To make it even more efficient and smooth in operation, we have fitted it with pneumatically driven rotating nozzles. This ensures an even cleaning process at all times. A common application for our hp floor cleaner is the removal of rubber residue from airport runways. All our surface cleaners can be fitted with a vacuum. This ensures a trouble-free and dirt-free working environment, improves visibility and workplace safety and reduces the impact of the process on the environment.

Special thinner for degreasing with excellent fat- dissolving properties. Evaporates without leaving any residue. Dissolves and removes paint residues. For degreasing paints of all kinds on work surfaces and materials before painting. The washing dilution can be used in washing-off, dipping, spraying and flooding processes. Other sizes available on request

A robust and versatile power tool tailored for heavy-duty household tasks. With its 1800W induction motor, it delivers a maximum pressure of 140 bar, making it ideal for a wide range of high-pressure cleaning applications. Its ergonomic design ensures comfortable, fatigue-free operation even during extended use. The RP-0140 excels in heavy-duty household chores such as rust removal, descaling, paint stripping, and tackling greasy and oily residues. When it comes to convenience, this high-pressure washer doesn't disappoint. Despite weighing 14.7kg, its ergonomic design, coupled with attached wheels and handles, facilitates effortless transportation. If you're considering adding a high-pressure washer to your store's inventory, the Ronix RP-0140 is an excellent choice that will satisfy your customers.

With high-quality filter tubes and PTFE diaphragms. Paint dust filters Wet painting also results in overspray. Overspray is the solid portion of the paint that is not taken up by the workpiece. According to the purpose of use, the overspray is moist and sticky immediately after release. It is captured by the exhaust air stream in the spray booth and fed to a filter. This can be, for example, a baffle plate filter, paper filter, fleece filter, glass fibre filter or also combinations of these. The adhesive effect causes the paint particles to adhere to the contact surfaces of the respective filter medium, as a result of which a good degree of separation is achieved. However, all these filters are storage filters, i.e. the filters clog up more and more during operation and cannot be regenerated. A filter exchange becomes necessary if the exhaust air rate of the spray booth falls below the minimum. This can be very time-consuming under certain circumstances and the work process must be interrupted in order to do it. To make things worse, not only must the filtered and bound paint residues be disposed of, but also the actual filter materials. Such tooling times are not justifiable for automatic, continuous or multi-layer painting processes. Continuous procedures such as automatically cleaned filters are likewise required for this. The humidity and the adhesiveness of the particles to be filtered are thereby the problem. In order to solve this problem, the paint particles should be relieved of their adhesive capability as far as possible whilst still inside the paint booth. Our patented ‘RTS-Rotation’ system is outstandingly well suited for this. The system is comprised of slowly rotating brush rollers, which take up the adhesive paint particles on the surface of the bristles and allow them to dry there. The bristles are automatically regenerated at pre-specified time intervals by combing devices that swing in at the rear of the brush rollers. The dislodged paint residues can then be removed and disposed of either manually during work breaks or automatically during operation. The degree of separation of this system is, however, insufficient to satisfy the environmental protection requirements concerning residual dust content in the exhaust air. A further filter stage is necessary for that. It must be assumed that the paint particles arriving here are to a certain extent still damp and sticky. For this we use special paint dust filters with high-quality filter tubes with PTFE diaphragms. If necessary, precoating agents (auxiliary dust) are used in order to neutralise the adhesive capability of the particles and to keep the dust layer on the filter elements permeable to air. The precoating agent is injected into the raw air pipe by means of special dosing units. The filter tubes are cleaned by means of compressed air impulse cleaning. The use of this technology requires special know-how. We have had the appropriate experience for almost ten years. The implemented plants have capacities ranging from 5,000 to 90,000 m³ /h. Because of the large number of different paint systems, individual experiments are usually necessary in our pilot plant in order to find the correct solution for the individual case.

The majority of plastics used today are very susceptible to the formation of electrostatic charges on the surface. The result of this is that the surfaces are strongly attractive to particles floating in the surrounding air. These adhering particles must be removed before painting. Dirt is difficult to remove from three-dimensional or structured surfaces using conventional methods. Components such as goods carriers, which are used continuously in circulating operation, are usually also difficult to clean on account of their geometry. The dynamic ionisation station has been developed especially for these applications. The goods carriers with the three-dimensional workpieces usually pass through the ionisation station standing on, or suspended from conveyor systems. Ionisation electrodes installed in the inlet and outlet generate positively and negatively charged ions, which are transported by the flow of air to the plastic surfaces. The static surface charges are neutralised as a result. The rotary cleaning nozzles located in-between remove adhering particles from the surfaces of the workpieces using cleaned compressed air. Dust and material particles are blown away by a pulsating air flow from different directions due to the rotation of the nozzles. This highly effective method enables even dirt on shaped parts to be cleaned off reliably. The particles cleaned off in this station are fed to a filtered extraction device by targeted air guidance.

Suitable for removal of varnish, oil paints, synthetic resin paints, dispersion paints and for cleaning stone hard brushes (not plastic bristles). The stripper also dissolves several layers in one operation. Substrates made of wood, metal and masonry are not attacked. Plastics and non-solvent-resistant substrates can be attacked.

The unique scaler preforms scores of industrial and shipboard descaling and cleaning jobs quickly, efficiently and economically. Removes old paint and rust, dislodges solid matter or scale tar. Removes concrete adhering to panels, conveyors, mixers. Strips off bark from lumber, and scores of other applications.

The unique scaler preforms scores of industrial and shipboard descaling and cleaning jobs quickly, efficiently and economically. Removes old paint and rust, dislodges solid matter or scale tar. Removes concrete adhering to panels, conveyors, mixers. Strips off bark from lumber, and scores of other applications

The unique scaler preforms scores of industrial and shipboard descaling and cleaning jobs quickly, efficiently and economically. Removes old paint and rust, dislodges solid matter or scale tar. Removes concrete adhering to panels, conveyors, mixers. Strips off bark from lumber, and scores of other applications

SANHA®-Heat Distribution cabinet, surface-mounted, galvanically zinc-coated steel sheet, painted white (RAL 9010), with removable door and locking bolt, installation depth 125 mm.

Scalable system, consisting of paint stripping, rinsing, conveyance of the workpieces, and (optional) vacuuming. Multitank systems can be manufactured on the basis of the TB400 or the TB1000. The basic unit is a system consisting of 1 paint stripping tank, 1 rinsing tank, drip station, semi-automatic conveyance system, and vacuum (optional). On this basis, we can design systems with various different paint stripping tanks (e.g., for different kinds of paint stripping agents), with one or several rinsing tanks, and (optionally) vacuuming for connection to the customer's waste gas disposal system.

SMiTO TECHNIC is highly specialized in the field of paint removal technology and thus able to design and develop individual systems exactly tailored to your specific paint stripping tasks. Wherever our standard systems do not match your needs, we can develop creative solutions for the most-varied of requirements. In doing so, we attach special importance to plant safety and high quality.

Suitable for water-based paint strippers with operating temperatures of up to 90 °C. Modular design for the highest level of safety and (if needed) customization to the desired height of the spraying chamber. Electronics and paint stripping agent tank in separate "technical module." Uniform coating of the workpieces through the use of a nozzle system in the spraying chamber, consisting of needle-nose jet nozzles and flat-jet nozzles and a rotatable cage for the workpieces. High loading capacity by virtue of the cage diameter of 1500 mm and effective interior height of 2100 mm; max. cage load: 750 kg. Stripping agent tank: 1000 liters for long effective life of the medium, indirect electrical heating. All parts coming into contact with the media are made of stainless steel. Easy operation with clearly arranged displays and operating controls. High-quality Siemens control for monitoring the paint stripping process.

Lifting aid with smooth hoist to lower / raise the racks (sieve basket, hooks, wire mesh crates, or similar) holding the workpieces into / out of the tank. This facilitates loading and unloading at a comfortable height, and without any direct contact with the chemicals.

Lifting aid with smooth hoist to lower / raise the racks (sieve basket, hooks, wire mesh crates, or similar) holding the workpieces into / out of the tank. This facilitates loading and unloading at a comfortable height, and without any direct contact with the chemicals.

The dip tank TB400 is the smallest model in our line of paint stripping systems. It is ideally suited for wheels / light-alloy rims, bicycle and motorcycle frames, painting aids or hooks. Insulated, double-walled dip tank ("vat-in-vat" system) with insulated top cover, indirect electrical heating, circulating system, and high-quality safety and monitoring technology.

for removal of paints, varnishes, oils, bitumen and rubber com-pounds Art.-No. 3204446