Oil spray - Import export

Lubrication, cleaning and protection of bright metal surfaces, e.g. of precision machine tools, measuring equipment, mechanisms in precision mechanics and optics, of precision instruments Can be used at machine elements of all types, for example sliding parts or slideways, at threads, locks, hinges, joints, drives Versatile use over the full range of care, conservation and maintenance applications Advantages and benefits Highly effective due to good wetting, dissolving and protective ability Good creep properties Behaves neutrally with respect to plastics, elastomers and paints Good protection against corrosion-causing moisture and wetness Resin and acid-free OKS 700 is also suitable for use with the refillable Airspray system

Maintenance oil for dismantling, lubrication and care of machine elements and metal surfaces. Dismantling of all seized or sticky components or machine elements, e.g. door locks, hinges, screws, bolts, bushings, cranks, linkages, valves, slide rails, cable pulls, shafts, etc. Lubrication of fine-mechanical instruments, measuring instruments, office and computer equipment etc., even at low temperatures Advantages and benefits Highly effective due to ideal combination of mineral oil and additives with solvent Broad range of uses in the complete maintenance sector Displaces moisture, protects against corrosion Cleans, maintains and lubricates Gets under rust

For cleaning and care of metal surfaces Dismantling rusted-in parts Protects electrical contacts Temporary corrosion protection for bare metal surfaces Elimination of squeaking noises Lubrication of friction points at moving machine parts Advantages and benefits Broad range of uses (6-fold action) Highly effective due to very good creep properties Also infiltrates strong oil and greasy soiling Good lubricating properties thanks to high oil percentage Displaces moisture

Drop lubrication of cutting tools at machining work on ferrous and non-ferrous metals, for example during drilling, thread cutting, sawing, milling, punching and nibbling Advantages and benefits Reduces friction and required force Permits high continuous load and higher cutting speeds Allows optimal cutting surfaces Extend tool lives through reduction in wear Neutral behaviour toward machine coatings Free of chlorine and heavy metals Low tendency to form oil mist Apply a sufficient quantity of OKS 390 to the tool or machining point using a brush, drip oiler or oil can. Spray on sufficiently OKS 391 spray. After use OKS 390 can be removed with OKS 2610/OKS 2611 universal cleaner. Caution: Check compatibility before using on non-ferrous metals.

Lubrication of chains and machine elements operated outdoors Multi Oil also at higher temperatures Advantages and benefits Good lubricating properties Good creep capacity Biodegradable VOC-free Can be used up to 160°C Silicone-free Percentage of renewable raw materials > 90%

Lubrication of chains, hinges, joints, clamping and drying frames or slideways at higher temperatures Suitable for conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Highly effective due to optimum wear protection and outstanding oxidation properties Resistant to water and steam Good creep properties Very good adhesion and lubrication effect with no tendency to drip

Fully synthetic oil for use at permanently low temperatures in all areas of the food processing industry, for example in cold storage houses, shock freezers, etc. Chain lubrication at arctic temperatures Advantages and benefits NSF H1-registered MOSH/MOAH free Excellent low-temperature behaviour Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, as well as disinfectants and cleaning agents Long economic operating times

Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection MOSH/MOAH-free

Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc. Chains in a dusty environment Advantages and benefits Light-coloured High lubrication effect due to optimum product formula Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without solid lubricants Broad range of uses in all maintenance sectors

INOX Slide and Bed Track Oils INOX Spray Oils INOX Compressor Oils INOX Formwork Oils INOX Cutting Oils INOX Grinding Oils

Eckardt Umformtechnik GmbH Contact-free lubrication Flexible & clean application Our spray systems apply oils and release agents fully contact-free. Making use of this method you guarantee the medium is applied cleanly and evenly, which allows you to act flexibly if not all areas of a material are to be lubricated uniformly. One huge advantage of our spray systems is their extremely fast changeover times to use different grades of oils. Oil/release agent storage; manual and fully automatic control and monitoring of the spray process. We offer our customers a wide range of options. Features & benefits • Minimum setup times when changing spray medium • Different spray nozzles available • Suitable for all fluid media and numerous oil grades Individual solutions for all application purposes EOS systems are perfectly designed to meet the needs of industry to apply oils and release agents. They are solidly built and exceptionally easy to maintain; they reliably and precisely control

Drop lubrication of cutting tools at machining work on ferrous and non-ferrous metals, for example during drilling, thread cutting, sawing, milling, punching and nibbling Advantages and benefits Reduces friction and required force Permits high continuous load and higher cutting speeds Allows optimal cutting surfaces Extend tool lives through reduction in wear Neutral behaviour toward machine coatings Free of chlorine and heavy metals Low tendency to form oil mist OKS 390 is suitable for use with the OKS Airspray system Also available as spray version OKS 391Apply a sufficient quantity of OKS 390 to the tool or machining point using a brush, drip oiler or oil can. Spray on sufficiently OKS 391 spray. After use OKS 390 can be removed with OKS 2610/OKS 2611 universal cleaner. Caution: Check compatibility before using on non-ferrous metals.

Oil mist separator Best possible protection against oil and spray mist Clean air – always With our special filter system EONA 3000 you efficiently remove oil mist and oil vapour emitted during lubrication procedures to maintain high air quality at the machine and place of work. Features & benefits • High separation efficiency thanks to the integrated F9 class filter • Several filter stages, which ensures the last filter stage enjoys a particularly long service life • Installed in a sturdy sheet-steel housing • Various “docking sizes” for suction hoses • Controllable ventilator (including remote control) Design versions and details The extremely sturdy filter system EONA 3000 is designed for horizontal extraction. We offer this product suitably sized for all working environments. The extraction capacity of the EONA 3000 is 3000 m3/h. The separated oil is collected or is allowed to drain. An electrostatic extraction filter is available as an optional extra. Moreover, the system is a

Our supply tanks are suitable for all common lubricants. No matter if graphite containing, salty or oil based products, the Jerko spraying unit is equipped for all applications. Standard sizes form 250 litres up to 2.000litres Due to the special surface and well thought-out cleaning function, the unit is durable and requires low maintenance. For cleaning, the complete cover can be lifted off with a few simple movements. This modular system allows easy replacement of the components. The necessary pressure to supply the spray equipment is generated by a piston pump developed by Jerko with a transmission ratio of 1:3.

DF-40 provides several application possibilities, for example: rust dissolver (will make corroded bolts easy to loosen), corrosion protection, penetrating oil, lubricant, maintenance oil for measuring tools, cleaning agent and many more. DF-40 is made of renewable raw materials.

-perforated intermediate floor 100 mm above the floor, perforation Ø 3 mm, separation 6 mm -1” drain-cock for drainage of liquids -can be emptied at any height by cable operated from the driver’s seat -body wall with reinforced edging -sturdy frame with fork sleeves -can be secured to prevent slipping and unintentional emptying -welding, oil- and watertight -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,3 / 0,5 / 0,75 / 1,0 / 1,5 -Load capacity in kg: 750 - 1500

Light, synthetic oil with extremely powerful release for minimal-/micro spraying Alloy Al, Mg Properties and Advantages • film-forming ability at temperatures exceeding 400 °C • release agent for minimal-/micro spraying • improved viscosity for even better atomizing • start up of new dies • forms release layer lasting multiple cycles • reduces metallization in problem areas • replaces traditional pastes (e.g. silver- and acid containing pastes) • significantly reduced smoke development • 25 % more active substance compared to Isolat® UP 78

SCHÜTZE spray valve ASV pneumatically controlled spray valve. Suitable for spraying release agents, oils, colours, etc... .Spray angle can be regulated individually from round- to flatspray without changing the aircap. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø

SCHÜTZE spray valve MKD-IS R/F The spray valves are electro-pneumatically controlled spray valves. They are suitable for spraying release agents, oils, colours and in version KLS also for glues and adhesives. The specific features are the regulation for atomizing air, separate for cone and middle holes and the integrated control valve for pre- and purging air. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5 mm ø

SCHÜTZE spray valve MKD-IS R/F The spray valves are electro-pneumatically controlled spray valves. They are suitable for spraying release agents, oils, colours and in version KLS also for glues and adhesives. The specific features are the regulation for atomizing air, separate for cone and middle holes and the integrated control valve for pre- and purging air. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5 mm ø

SCHÜTZE spray valve MFS pneumatically controlled spray valve. Suitable for spraying release agents, oils, colours, etc... . Also in version MFS/KLS available. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5; 2,0; 2,5 mm ø flatspray or roundspray pattern depending on aircap