Oem application - Import export

Application examples are often found where the standard versions of the sensors and the controller are performing at their limits. One of our special strengths is having the possibility to adapt our sensors to the individual requirements of our customers. The various measuring principles can be modified in different ways. Changes requested include, for example, modified measuring ranges, integrated controller, modified designs, mounting options or integration of different interfaces. Together we will find the best solution for your measurement task.

Draw-wire sensors of the wireSENSOR series measure almost linearly over the entire measuring range and are used for distance and position measurements between 50 mm and 50,000 mm. Draw-wire sensors from Micro-Epsilon are ideal for both direct integration and subsequent assembly in serial OEM applications, e.g., in medical devices, lifts, conveyors and automotive engineering.

The Raytek MI3 digital infrared thermometer represents a new generation of performance and innovation in continuous noncontact temperature monitoring for a broad range of OEM applications and manufacturing processes. Each MI3 infrared temperature thermometer is a two piece system with a miniature sensing head and separate communications electronics. The miniature sensing head can be installed in any system and outperforms much larger sensors, making the Raytek MI3 the best valued IR temperature sensor in its class. The OEMMI3 version of this digital infrared thermometer allows direct digital communication with the host machine controller without the need for an additional communication box. The innovative multiple sensing head interface, which can support up to 8 individually addressable heads per communication box, reduces sensor cost, simplifies sensor installation and applications troubleshooting, and provides the lowest cost per measurement point.

The Raytek CM IR temperature sensor is designed for continuous temperature monitoring in a broad range of manufacturing processes and OEM applications. This sensor provides the advantages of infrared temperature measurement in a powerful, compact, integrated sensor. The CM sensor can easily replace traditional contact probes with a J-type or K-type thermocouple output, or with a user scaleable 0-5 volt output. The CM's onboard electronics are protected by a rugged IP 65 (NEMA-4) stainless steel housing, allowing the sensor to function in ambient temperatures to 70°C (160°F) without cooling. Although small in size, the CM is loaded with advanced features. An RS232 digital interface allows the user to configure all programmable sensor variables with the powerful DataTemp® Multidrop software included with each sensor. The built-in sensor health LED provides a convenient on-line indicator of the sensor's operating status and aids in troubleshooting initial sensor setup.

Features: — nominal pressure: 0 ... 2 bar up to 0 ... 400 bar — accuracy: 1.5 % FSO — display and housing rotatable — up to 2 contacts — configurable via display Optional Features: — analog output

Compact OEM Pressure Transmitter Heavy Duty Applications: ► mobile hydraulic, presses ► general mechanical engineering Characteristics: ► stainless steel sensor, welded ► accuracy according to IEC 60770: 0.5 % FSO ► nominal pressure ranges from 0 … 16 bar up to 0 … 600 bar

Wide temperature range from -20°C to 500°C 13:1 optics at 90% energy 150 ms response time Scaleable 0 – 5 V output or t/c type J or K output Alarm output Sensor status/self diagnostic indicator LED RS232 digital communications for sensor set-up and monitoring Adjustable signal processing Rugged IP65 stainless steel housing DataTemp Multidrop software compatible Accessories for air purging and lens protection

The OPTIFLUX 1000 is an electromagnetic flow sensor. Combined with the IFC 050, IFC 100 or IFC 300 signal converters it forms the OPTIFLUX 1050, OPTIFLUX 1100 and OPTIFLUX 1300 electromagnetic flowmeters for water and other conductive, non-abrasive media and OEM machinery applications.

The OPTIBAR LC 1010 is a submersible level probe for water and wastewater, environmental engineering and OEM applications. It is particularly suitable for continuous hydrostatic level measurement in water wells, rainwater retention and overflow basins or tanks. The level transmitter features a robust stainless steel housing and a high overload-resistant ceramic diaphragm for long-term operation. The diaphragm is flush mounted for safe and easy cleaning on site. The level probe comes with pre-configured measuring ranges from 100 mbar / 1.5 psi to up to 10 bar / 150 psi. Customer-specific ranges are available on request. Its corrosion-resistant TPE cable is approved for use in potable water applications. The OPTIBAR LC 1010 features a 4…20 mA output and optional HART®7 for convenient configuration. The level probe can also be provided with an integrated Pt100 temperature sensor.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FTSS355-300 laser delivers 300 µJ pulse energy at a maximum repetition rate of 20 Hz and a pulse width of 1.7 ns, i.e. a peak pulse power of 175 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FDSS532-1000 laser delivers 1 mJ pulse energy at a repetition rate of 20 Hz and a pulse width of 1.8 ns, i.e. a peak pulse power of 550 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FDSS532-150 laser delivers 150 µJ pulse energy at a maximum repetition rate of 100 Hz and a pulse width of 1.2 ns, i.e. a peak pulse power of 125 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FQSS213-50 laser delivers 50 µJ pulse energy at a maximum repetition rate of 30 Hz and a pulse width of 1.3 ns, i.e. a peak pulse power of 40 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS Q series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. This consists of an Nd:YAG resonator with a directly coupled saturable absorber which works as a passive Q-switch. The compact housing and easy operation make the lasers an optimum light source for applications that require minimal housing dimensions with highest performance. Based on the 1064 nm fundamental, harmonics are generated using non-linear (NLO) crystals that allow a wide spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS213-Q2 laser emits pulses with approximately 1 ns pulse width at 213 nm, and can be modulated from single shot to 10 kHz. The pulse energy is 0.1 µJ. CryLaS lasers impress with their easy installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The CryLaS Q series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. This consists of an Nd:YAG resonator with a directly coupled saturable absorber which works as a passive Q-switch. The compact housing and easy operation make the lasers an optimum light source for applications that require minimal housing dimensions with highest performance. Based on the 1064 nm fundamental, harmonics are generated using non-linear (NLO) crystals that allow a wide spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS213-Q1 laser emits pulses with approximately 1 ns pulse width at 213 nm, and can be modulated from single shot to 20 kHz. The pulse energy is 0.05 µJ. CryLaS lasers impress with their easy installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FTSS355-50 laser delivers 50 µJ pulse energy at a maximum repetition rate of 100 Hz and a pulse width of 1.3 ns, i.e. a peak pulse power of 60 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS266-Q1 laser emits pulses with a pulse width of approx. 1 ns at 266 nm and can be modulated from single shot to 20 kHz. The pulse energy is 0.3 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS266-Q2 laser emits pulses with a pulse width of approx. 1 ns at 266 nm and can be modulated from single shot to 10 kHz. The pulse energy is 0.8 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FQSS266-50 laser delivers 50 µJ pulse energy at a maximum repetition rate of 100 Hz and a pulse width of 1.1 ns, i.e. a peak pulse power of 45 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS Q series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. This consists of an Nd:YAG resonator with a directly coupled saturable absorber which works as a passive Q-switch. The compact housing and easy operation make the lasers an optimum light source for applications that require minimal housing dimensions with highest performance. Based on the 1064 nm fundamental, harmonics are generated using non-linear (NLO) crystals that allow a wide spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS213-Q4 laser emits pulses with approximately 1 ns pulse width at 213 nm, and can be modulated from single shot to 1 kHz. The pulse energy is 2.5 µJ. CryLaS lasers impress with their easy installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FTSS355-50 laser delivers 50 µJ pulse energy at a maximum repetition rate of 100 Hz and a pulse width of 1.3 ns, i.e. a peak pulse power of 60 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FQSS266-200 laser delivers 200 µJ pulse energy at a maximum repetition rate of 20 Hz and a pulse width of 1.5 ns, i.e. a peak pulse power of 130 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS Q series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. This consists of an Nd:YAG resonator with a directly coupled saturable absorber which works as a passive Q-switch. The compact housing and easy operation make the lasers an optimum light source for applications that require minimal housing dimensions with highest performance. Based on the 1064 nm fundamental, harmonics are generated using non-linear (NLO) crystals that allow a wide spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS213-Q3 laser emits pulses with approximately 1 ns pulse width at 213 nm, and can be modulated from single shot to 2.5 kHz. The pulse energy is 1.5 µJ at 1 kHz. CryLaS lasers impress with their easy installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS266-Q3 laser emits pulses with a pulse width of approx. 1 ns at 266 nm and can be modulated from single shot to 2.5 kHz. The pulse energy is 4 µJ @ 1 kHz. CryLaS lasers impress with their simple installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The DSS1064-3000 laser delivers 2.5 mJ pulse energy at a repetition rate of 20 Hz and a pulse width of 2.5 ns, i.e. a pulse peak power of 1 MW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

STAUFF BPS Bypass Filter can be used for OEM first fit applications as well as for retro-fitting. The filtration is done in a bypass configuration from the main hydraulic system.. Clogging Indicator (available as an option) ▪ Visual clogging indicator Valves ▪ Flow control valve Filter Elements ▪ Filter Elements of SRM series Construction ▪ Bypass Filter Units are especially designed for mobile applications in hydraulic and/or transmission systems ▪ No special motor/pump unit neccessary ▪ Single or double housing Nominal Flow Rate ▪ Max. 4,2 l/min / 1.1 US GPM Max. System Volume ▪ Up to 1.500 l / 400 gal Port Connections ▪ G1/4, G1/2 Materials ▪ Anodised Aluminium Media Compatibility ▪ Mineral or lubrication oils, others on request

The micro-module DKRF4002 is designed for humidity measurements withing the range of 0...10%. Its humidity sensor offers high accuracy and excellent long-term stability and was specifically developed for OEM applications which require a RS232 interface Signals both for temperature and relative humidity can be output through the serial interface. Two models differing in measuring accuracy are available: DKRF4002 with +/-3.5RH and DKRF4002-P with +/-2%RH.

The humidity sensor DKRF4001 comes with two analog outputs. Its micro-module is specifically designed for OEM applications. High accuracy as well as excellent long-term stability are among its features. The calibrated, linear outputs offered are 0..1/0..5/0..10VDC. The sensor modules can perform measurements at 0...100%RH and between -20...+80C. With the right configuration measurement applications which demand higher temperatures can be performed.

Oil free compressors from Dürr Technik are of the highest quality, maintenance-free, extremely quiet, especially reliable and long lasting. Oil-free compressors in this range are mainly used for valve- or cylinder control in OEM applications, but these compact products with protection class IP 54 have also been proven in the water treatment sector for many years. The KK15 range also covers oil-free compressors with DC motors. Advantages small dimension (smaller than a shoe box) continious-running maintenance free extremely quiet