Nozzle - Import export

Without inserted capillary Good adhesive flow Precise application Thread: 3/8“ UNF Compatible with Nordson (Series H200 / H400 / SolidBlue / MiniBlue) Robatech and ITW-Dynatec (Micro)

The one4all 2B multi-bore nozzles are available with 2 bore holes for bead application. Compatible with Nordson H200 / H400 / SolidBlue / MiniBlue Compatible with Robatech and ITW-Dynatec (Micro) Suitable for BÜHNEN Different diameters for dot and bead application

You can clean your nozzles with a nozzle cleaning set consisting of 6 needles. Extends the useful life of nozzles For bead and spray nozzles For different bore diameters

Optimum surface cleaning with KAMAT high-pressure rotating nozzles In order to ensure a surface treatment with excellent results and within a reasonable time, we have developed special externally driven rotating nozzles suitable for our high pressure pumps: Depending on the customer's requirements, our nozzles can be driven pneumatically, electrically or hydraulically. With traditional, self-powered rotating nozzles, the water jet hits an angle before it exits the nozzle, causing the nozzle to rotate. Driving the rotating nozzle causes the water jet to lose energy and is therefore much less efficient. Our externally driven rotary nozzles concentrate the hydraulic energy entirely on the machining process. KAMAT rotating nozzles provide coherent jets that can be moved precisely and quickly over large areas. In the case of externally driven rotation, the hydraulic energy is used entirely on the surface being sprayed, giving excellent and efficient results on surfaces.

Maker: BOSCH

Maker: BOSCH

The Freek heat transfer nozzle heater type especially addresses manufacturers and users who operated their hotrunner nozzles with cast-in heaters in the past and would like to stick to their engineering know-how without paying the high price of this former heater design. The standard material of our patent pending Freek heat transfer alternative is brass, with or without coating, basically with a slit. Characteristics of our HotMicroCoil nozzle heaters sheathed by a reflection tube are easy mounting and variable heat distribution. Because of its direct touch and toleranced fit, the heater allows a very good heat transmission to the nozzle. In all our HotMicroCoils with reflection tube the assembly of a thermocouple is possible and recommended for bigger diameters and power. Also most common nozzle heater solutions are HotMicrocoil heating elements with clamp bands with diverse locking mechanisms.

The Freek-MicroCoil 1.3 x 2.3 mm used in the "Brazed-Together" energy-saving nozzle heater is wound tightly onto a precision tube with good thermal conductivity and encapsulated and thermally insulated by means of an outer housing. For even more reliable heat transfer, the heater can optionally be vacuum brazed. The "Brazed Together" design combines many advantages: high accuracy, good heat conduction, high power density, mechanical stability and, last but not least, up to 20% higher energy efficiency. Freek is one of the technology leaders in the field of hot runner heating and supplies the who's who of the industry. Energy efficiency is one, if not the central innovation topic here. Manufacturers of high-cavity PET hotrunners and moulds in particular benefit from the BT nozzle heaters, and in several ways: because the less energy that is put into the system, the less energy has to be taken out on the cold side, the mould. This saves even more energy and shortens the cycle time.

The Freek heat transfer nozzle heating system especially addresses manufacturers and users who operated their hotrunner nozzles with cast-in heaters in the past and would like to stick to their engineering know-how without paying the high price of this former heater design. The standard material of our Freek heat transfer nozzle heater alternative is brass, with or without coating, preferably with a slit. The slit allows the assembly of an external bendable thermocouple and facilitates the disassembly, e.g. in case of a revision and can be coiled over. This is not possible at competitor's nozzle heater solutions. Freek's tight coiling at the heater's ends provides a maximum possible power concentration (patented).

Our Locking System provides a quick, easy and reliable clamping of the heating element on the nozzle to be heated. It facilitates an effective heat transfer, as the inside sheath is pressed to the nozzle with a high level of precision creating an interference fit. Due to the method of construction of the lock, installation is possible in the restrictive space of small cavities. The lock can be operated quickly and efficiently with simple readily available tools.

Spare Heaters suitable for hotrunner nozzles of familiar OEMs: Clamp Band Heaters for Husky Art-No. 520156, 521334, 534192, 534445, 534233, 534234 Kappa heaters for Husky 1250 series,(Bi-Metal, Bi-Metal with TC, Ultra 1250) for Husky 750 series (Bi-Metal, Bi-Metal HTR S/A, Ultra 750) for Husky 500 series (Ultra 500, Copper Ultra 500) Reflection tube nozzle heaers for Husky 500 series (500 HTM Brass) for Mastip MX series (MX13, MX16, MX19) for Mastip DX/MJ series (DX09, MJ09) for Mastip

Flottweg nozzle separators (2- and 3-phase nozzle separators) are used for the continuous separation of solids from liquids and ensure highly efficient clarification or separation. The product to be clarified or separated flows via a stationary inlet pipe into the inside of the bowl and is gently accelerated to operating speed by the distributor. Characteristics of our nozzle separators: — Energy-optimized and low-wear bowl design — High performance — Simple and fast maintenance — Designed for perfect hygiene The Flottweg nozzle separators are available in two basic designs: — Clarifier / 2-phase nozzle separator — Concentrator / 3-phase nozzle separator

Flottweg nozzle separators (2- and 3-phase nozzle separators) are used for the continuous separation of solids from liquids and ensure highly efficient clarification or separation. The product to be clarified or separated flows via a stationary inlet pipe into the inside of the bowl and is gently accelerated to operating speed by the distributor.

Especially for high-cavity PET plastic injection moulding there are various industry standards of clamp-band nozzle heaters available. Most common are the Axial Clamp-Band Heater and the Two-screw Clamp-Band Heater. Our HotCoil cable heaters with clamp band represent a highly demanded and very flexible clamping system, especially for heating larger nozzles and bushings with high power. The size-variable customizable clamp bands counteract the heating's thermal-related "lifting ambition" during heat-up and thus effectively prevent a possible critical overheating. For an even better protection all HotCoil heating elements can also be provided with an integrated thermocouple. As alternative to our standard clamping mechanism with welded clamping elements a space-saving lug clamping mechanism can be supplied.

Flottweg nozzle separators (2- and 3-phase nozzle separators) are used for the continuous separation of solids from liquids and ensure highly efficient clarification or separation. The product to be clarified or separated flows via a stationary inlet pipe into the inside of the bowl and is gently accelerated to operating speed by the distributor. Characteristics of our nozzle separators: — Energy-optimized and low-wear bowl design — High performance — Simple and fast maintenance — Designed for perfect hygiene The Flottweg nozzle separators are available in two basic designs: — Clarifier / 2-phase nozzle separator — Concentrator / 3-phase nozzle separator

Flottweg nozzle separators (2- and 3-phase nozzle separators) are used for the continuous separation of solids from liquids and ensure highly efficient clarification or separation. The product to be clarified or separated flows via a stationary inlet pipe into the inside of the bowl and is gently accelerated to operating speed by the distributor. Characteristics of our nozzle separators: — Energy-optimized and low-wear bowl design — High performance — Simple and fast maintenance — Designed for perfect hygiene The Flottweg nozzle separators are available in two basic designs: — Clarifier / 2-phase nozzle separator — Concentrator / 3-phase nozzle separator

Injector nozzle with control for FERRUM wheel loaders . Will be delivered like shown.

You will find: crevice nozzle in two lengths and pipe diameters Upholstery nozzle, with thread lifter in different pipe diameters Suction brush, with swivel joint in various pipe diameters Suction hose, complete with connections and hand tube Telescopic tube, various telescopic tubes in different tube diameters for vacuum cleaners of well-known manufacturers

You will find: Combination nozzle with tilt and turn joint and thread lifter in different working widths and pipe diameters. Combination nozzle with butt edge gentle on furniture with swivel joint and thread lifter, various pipe diameters Turbo nozzle with brush roller, tilt and turn joint and rollers with different tube diameters Nozzle flat design with tilt and turn joint and two thread lifters

EZM Driveline – This is the brand name under which EZM can supply you with drawn bright steel, ground bright steel, peeled bright steel and ground-and-polished bright steel in virtually all cold-formable alloyed and carbon steel grades. Our bright steel is characterised by great dimensional accuracy and high-quality, bright surfaces. Compared to rolled and forged products, cold-drawn bright steel offers the advantage of a greater range of processing options. Of very special importance in this context is a lead-alloyed carbon steel for diesel injection pumps. The unique properties of this EZM speciality offer the perfect answer to such contradictory demands as maximum pressure resistance, on the one hand, and optimum machining properties, on the other. EZM is also a specialist for the processing of antifriction bearing steel/ball bearing steel, as well as alloyed high-grade structural steel. Nozzle body Nozzle body Injector body Injection nozzle DVTD_2V_Section >> Current...

EZM Driveline – This is the brand name under which EZM can supply you with drawn bright steel, ground bright steel, peeled bright steel and ground-and-polished bright steel in virtually all cold-formable alloyed and carbon steel grades. Our bright steel is characterised by great dimensional accuracy and high-quality, bright surfaces. Compared to rolled and forged products, cold-drawn bright steel offers the advantage of a greater range of processing options. Of very special importance in this context is a lead-alloyed carbon steel for diesel injection pumps. The unique properties of this EZM speciality offer the perfect answer to such contradictory demands as maximum pressure resistance, on the one hand, and optimum machining properties, on the other. EZM is also a specialist for the processing of antifriction bearing steel/ball bearing steel, as well as alloyed high-grade structural steel. Nozzle body Nozzle body Injector body Injection nozzle DVTD_2V_Section >> Current...

Short description: The ideal tool for all-round cleaning smaller lines The cleaning nozzle is used for all-round cleaning operations in smaller lines up to 400 mm in diameter. This light nozzle has patented fluid mechanics (patent no.: DE 19516780) and two different jet angles. With its eight nozzle inserts it slides in the pipe. The cleaning nozzle goes around bends and is successfully used in difficult pipes.

Short description: The solid nozzle for everyday use The sewer nozzle is best suitable for a heavy everyday operation. With its 10 to 12 nozzle inserts and two different jet angles it is primarily used for the all-round cleaning of pipes up to 800 mm in diameter. The sewer nozzle has patented fluid mechanics (patent no.: DE 19516780) and is made of highly wear-resistant special steel. This universal nozzle of heavy construction is characterized by high efficiency and absolute reliability. It is an efficient and low-cost alternative to the conventional standard products.

Short description: Top quality nozzle for everyday use The torpedo nozzle is the ideal tool in all cases where high demands are placed on cleaning and pulling properties. Due to the patented fluid mechanics (patent no.: DE 19533654) and the highly wear-resistant material used it sets new standards on cost reduction and increase in efficiency. The torpedo nozzle that belongs to the most efficient sewer cleaning tools was designed for cleaning lines up to 400 mm in diameter. Two different jet angles contribute to an effective transport of dirt and silt. The torpedo nozzle can cope with difficult tasks in round as well as in egg-shaped pipes.

Short description: All-round cleaning The royal nozzle is one of the most efficient tools for extremely dirty sewers. It adds a new dimension to cost reduction and increase in efficiency. The royal nozzle is specially designed for the all-round cleaning of sewers from 300 mm in diameter. Due to the patented fluid mechanics (patent no.: DE 19533654) its efficiency is unequalled. Two different jet angles ensure optimum cleaning performance in lines up to 1200 mm in diameter.

Category Diesel technology / Sealings diesel fuel systems / Nozzle rings Product number supplier 110240

Spit nozzle SD 17: version for pin-point and linear application The pneumatically operated SD 17 is also available as a spit nozzle version. The fully spray valve has been specifically developed for pin point and linear application of oils, release agents and other low-viscosity media; it maintains its precision at certain distances between the nozzle and the application object. The spit nozzle SD 17 is particularly suitable for precision lubrication tasks of components and tools; it can also be setup for higher viscosities via an optionally selectable heating unit.

High-tech system for maximum process reliability. Automatic nozzle SDA 30: high-tech system for maximum process reliability The SDA 30 is an integrated system consisting of a nozzle and a control module. The nozzle is equipped with a Hall sensor that monitors and controls the position of the nozzle needle. All operational settings/adjustments (oil rate and so forth) are automated via the controller of the proprietary Eckardt control unit. This makes it possible to control up to four nozzles at the same time.

Spray and spit nozzles Variety, precision, flexibility: the right solution for every spray task Uniform precision No matter if thin films are to be applied evenly or the smallest lubrication points need to be met with precision – we have the right spray nozzle for you. We have the right solution for all of your application tasks: from a spare part through to an individual standalone configuration to meet your requirements. Features & benefits • Infinitely variable, precise control (spray interval, pressure) • Pneumatic or electric control • Low mist nozzle caps for flat or round spraying • Self-cleaning Design versions and details Spray nozzle SD 16: precision application of fluid media The SD 16 ensures you are able to apply the thinnest films of media such as low-viscosity oils and release agents with precision. For example, the pneumatically controlled, compact nozzle can be integrated directly in a forming tool to facilitate targeted, practically mist-free wetting. Depending o