Viscose - Import export

For the most cost-effective filtration: The binder-strengthened (chemically bonded) viscose fibres from Cora®Visk have a high pore volume and are therefore ideal for coarse and medium fine filtration.

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences NSF H1-registered

The ViscoTec dosing and filling pump RD-Hygiene for food and cosmetics is a volumetric pump based on the continuous piston principle. It is ideally suited for discontinuous or continuous pulsation-free dosing of viscous, structure-sensitive and solids-laden media. Thanks to the high-quality ViscoTec dispensers, high-precision dosing applications can be realized in the food and cosmetics sector. The systems are used e.g. in the bakery and confectionery sector for decoration. Typical doses are icing or fondant, but also fillings such as vanilla or chocolate cream. Your advantages: - Specially adapted filling tubes for a wide variety of filling applications - Application and dosing in automated systems - Low to high viscosity as well as abrasive, shear-sensitive or lumpy media - hot and cold filling - Optimum results for CIP/SIP (Cleaning in Place/Sterilisation in Place) cleaning

After every successful filling of a package, it is a basic condition for precise dosing that the thread is defined and breaks off cleanly. This effect usually occurs with water-like materials - with viscous products, so called semi-solids, but often not: Many products such as creams, gels and ointments pull long threads from the tip of the dispensing needle into the respective packaging. The ViscoTec Pharma Dispensers provide a solution: After a dosing shot of the Pharma Dispenser, the product path through the chambers in the rotor-stator system is blocked, thus preventing dripping of the dosing medium. A valve at the dosing needle or at the pump is not necessary. Thanks to the reversible direction of rotation, retraction can be set after the end of dosing: The material is drawn back into the dosing needle in a defined manner.

The ViscoMT-XM barrel emptying system with volumetric pump based on the endless piston principle. Your advantages: - for medium to high viscosity products (up to 7,000,000 mPas) - suitable for abrasive, shear-sensitive or lumpy materials loaded with fillers - clean wiping of the inside wall of the barrel due to follower plate with special sealing lip - suitable for cylindrical, ribbed or slightly conical barrels, plastic containers or containers with inliners - no lateral squeezing of the medium, as the follower plate is guided almost without pressure - discharge speed electronically adjustable - easy handling - pulsation-free conveyance/discharge - Residual quantity in the barrel: < 1% - compact design Application: Withdrawal of products directly from the delivery or storage container, e.g.: Tomato paste, honey, fats, icing, mascara and much more. pressure-controlled or level-controlled feeding of the products to filling machines or mixing processes.

The compact 3RD4-EC dispenser from ViscoTec ensures an even and reliable product supply of viscous, structure-sensitive and solids-laden products. Absolutely precise, uniform and reliable dosing of various media, such as adhesive dosing or sealant dosing, thanks to the special rotor-stator geometry. Alternating opening chambers ensure gentle product transport and pulsation-free output. Your advantages: - interior non-stick coated - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - long service life due to media-specific component selection - easy cleaning and condition check of the pump interior - quick disassembly

Application: Point dosing with highest volumetric accuracy - bead application with application speed adjustable to the web speed - encapsulation technology Areas of responsibility: - Electronic components - Semiconductor production - LCD/LED/OLED - Photovoltaics - Medical technology - Biochemistry - Laboratory - Optics and Photonics - SMD/SMT Technical Data: - True volumetric dosing - Retraction effect - Viscosity independent dosing - Easy cleaning - Inlet pressure independent dosing - Adjustable dosing flow - Pressure tight without valve - Dosing pressures up to 40 bar

The plastic submersible probe LMK 809 is designed for continous level measurement in waste water or in most of aggressive media. Basic element is a capacitiv ceramic sensor. Basic element of the plastic probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable and seal materials are available in order to achieve maximum media compatibility. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 45 mm — chemical resistance — high overpressure capability — pure ceramic sensor — especially for tank level measurement of viscous and aggressive media — housing material PP-HT or PVDF — diaphragm ceramics Al2O3 (99.9 %) Optional Features: — different kinds of cable and seal materials — prepared for mounting with pipe

The separable plastic immersion probe LMK 858 was designed for level measurement in aggressive media, desalination plants and for use in more viscous media such as sludge. Since the area of application is often outside a building, great emphasis was placed on high surge / lightning protection. The immersion probe is based on an extremely robust and precise pressure sensor, the membrane of which consists of a high-purity ceramic. Another special feature of the LMK 858 is the separability of the probe head and cable part. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 45 mm — chemical resistance — housing PP-HT — integrated lightning protection and increased overvoltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — cable protection — diaphragm pure ceramic (99.9 % AI2O3)

The separable stainless steel probe LMK 358 has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 39.5 mm — cable and sensor section separable — especially for sewage, viscous and pasty media Optional Features: — IS-protection Ex ia = intrinsically safe for gas and dust — cable protection via corrugated pipe — diaphragm pure ceramic (99.9 % AI2O3) — different kinds of cable — different kinds of elastomeres

The stainless steel probe LMK 382 has been designed for continous level measurement in waste water, waste and higher viscosity media. Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels easily. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 200 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 39.5 mm — especially for sewage, viscous and pasty media Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — mounting with stainless steel pipe — flange version — diaphragm pure ceramic (99.9 % AI2O3) — different kinds of cables — different kinds of elastomers

The separable stainless steel probe LMK 358H has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure range 0 ... 60 cmH2O up to 0 ... 100 mH2O — accuracy: 0.1 % — diameter 39.5 mm — cable and sensor section separable — HART®-communication (setting of offset. span and damping) — permissible temperatures up to 85 °C — high long term stability Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — cable protection via corrugated pipe — diaphragm (AI2O3 99.9 %) — accessories e.g. mounting flange with cable gland and terminal clamp

The stainless steel probe LMK 382H has been designed for continous level measurement in waste water, waste and higher viscosity mediums. Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels. Features: — nominal pressure range 0 ... 60 cmH2O up to 0 ... 200 mH2O — accuracy: 0.1 % FSO — diameter 39.5 mm — HART®-communication (setting of offset, span and damping) — permissible temperatures up to 85 °C — high overpressure capability — high long term stability Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — mounting with stainless steel pipe — flange version — diaphragm pure ceramic (99.9 % AI2O3) — accessoires e.g. assembling and probe flange, mounting clamp