Temperature reducers - Import export

Improves the run-in lubrication of new or overhauled machines and increases the load-carrying capacity Improves the lubricating properties of the oil under high loads and at high temperatures Reduces operating noises and wear Advantages and benefits Forms a pressure-resistant layer with high lubricating effectiveness Increase in the load-bearing share Reduction in the specific surface loading Lower thermal loading of the lubricant Considerably extended service lifeShake or stir well before use. Depending on loading, add 2-3% to engine oils and 3-5% to machine- and gear oils. Instructions of the machine manufacturer have to be observed. Mixing will occur in operation. Mix with appropriate lubricants only. Not suitable with water-based lubricants and polyglycol oils. Especially at older machines and machines normally used with unalloyed oils, the compatibility of OKS 30 with the installed gaskets has to be proved before application.

In 2015 the product name was changed. The old product name was Castrol Molub-Alloy 936 SF Heavy. Open Gear Lubricant (Solvent-Free) Description Castrol Molub-Alloy OG 936 SF Heavy (previous product name Castrol Molub-Alloy 936 SF Heavy) is an open gear lubricant specifically developed for use in heavy-duty mining and industrial equipment . Castrol Molub-Alloy OG 936 SF Heavy is designed to provide maximum protection to gearboxes and rails of large draglines and buckets, while keeping potential environmental contamination to a minimum . The contained mixture of Molub-Alloy solid lubricants optimizes wear protection and load capacity. The selected solid lubricants work synergistically with chemical anti-wear (AW) and high-pressure additives (EP), reduce temperatures in the contact zone and offer good anti-seize protection under high loads and shock loads.

In 2015 the product name was changed. The old product name was Castrol Molub-Alloy 936 SF Heavy. Open Gear Lubricant (Solvent-Free) Description Castrol Molub-Alloy OG 936 SF Heavy (previous product name Castrol Molub-Alloy 936 SF Heavy) is an open gear lubricant specifically developed for use in heavy-duty mining and industrial equipment . Castrol Molub-Alloy OG 936 SF Heavy is designed to provide maximum protection to gearboxes and rails of large draglines and buckets, while keeping potential environmental contamination to a minimum . The contained mixture of Molub-Alloy solid lubricants optimizes wear protection and load capacity. The selected solid lubricants work synergistically with chemical anti-wear (AW) and high-pressure additives (EP), reduce temperatures in the contact zone and offer good anti-seize protection under high loads and shock loads.

In 2015 the product name was changed. The old product name was Castrol Molub-Alloy 936 SF Heavy. Open Gear Lubricant (Solvent-Free) Description Castrol Molub-Alloy OG 936 SF Heavy (previous product name Castrol Molub-Alloy 936 SF Heavy) is an open gear lubricant specifically developed for use in heavy-duty mining and industrial equipment . Castrol Molub-Alloy OG 936 SF Heavy is designed to provide maximum protection to gearboxes and rails of large draglines and buckets, while keeping potential environmental contamination to a minimum . The contained mixture of Molub-Alloy solid lubricants optimizes wear protection and load capacity. The selected solid lubricants work synergistically with chemical anti-wear (AW) and high-pressure additives (EP), reduce temperatures in the contact zone and offer good anti-seize protection under high loads and shock loads.

Castrol Syntrax Longlife 75W-90 is a fully synthetic axle gear lubricant for cars, heavy and light commercial vehicles and tractors. The performance reserves of Castrol Syntrax Longlife 75W-90 exceed the API class GL-5 and allow a significant extension of the existing oil change intervals (according to manufacturer regulations). Castrol Syntrax Longlife 75W-90 can be used in all axle drives and differentials without a multi-plate lock if a GL-5 lubricant with SAE 75W-90 is required. Advantages -Extremely high pressure absorption capacity -Excellent high-temperature stability -Significantly reduced gear oil temperature -Absolute shear stability -Excellent lubrication security at very low temperatures -Neutral sealing behavior -Excellent foam resistance -Extended oil change intervals possible (observe manufacturer's instructions) Specifications API GL-5 MAN 342 Type S1 Scania STO 1:0 ZF TE-ML 05A,12B,17B,19C,21A BMW (Non LS Rear Axles)

Castrol Transmax Manual Transaxle 75W-90 is a modern, fully synthetic high-performance manual transmission lubricant. Advantages excellent wear protection and shiftability for optimal use in transaxle transmissions - extended transmission service life minimized switching forces under all climatic conditions special protection during cold starts due to low pumping capacity reduced temperature level and excellent transmission cleanliness with extended service life Specifications API GL-4+ VW 501 50 SAE Class according to J306 before 1998

Castrol Transmax Manual Transaxle 75W-90 is a modern, fully synthetic high-performance manual transmission lubricant. Advantages excellent wear protection and shiftability for optimal use in transaxle transmissions - extended transmission service life minimized switching forces under all climatic conditions special protection during cold starts due to low pumping capacity reduced temperature level and excellent transmission cleanliness with extended service life Specifications API GL-4+ VW 501 50 SAE Class according to J306 before 1998

Castrol Syntrans Transaxle 75W-90 is a modern, fully synthetic, high-performance manual transmission lubricant. Application Excellent for manual transmissions and transaxle systems (manual transmission and final drive in one housing) of cars, vans and vans. Thanks to its high thermal stability and the multi-range characteristics SAE 75W-90, Castrol Syntrans Transaxle 75W-90 also covers the viscosity classes SAE 80, SAE 90 and SAE 80W-90. Advantages excellent wear protection and shiftability for ptimal use in transaxle transmissions minimized switching forces under all climatic conditions no shift scraping after cold starts and shaking during gear changes dampening of transmission noise fuel savings through improved transmission efficiency reduced temperature level and transmission cleanliness with

Lubricating oil additive for heavily loaded friction and rolling bearings for increasing the lubricating effect, improving the high-pressure properties and reducing the temperature increase Gear oil additive to guard against gearwheel damage Stops pitting and is especially suitable for gearbox designs with a high percentage of sliding Engine and compressor oil additive for reduced wear and increased operating safety, as run-in and smoothing lubricant Machining oil additive for chip-free or cutting production to increase working speeds and tool life Advantages and benefits Excellently suited as performance-increasing additive, as additive to bed track oils, engine oils, C/CC oils and slightly alloyed industrial oils Highly effective due to finest, homogeneous MoS₂ distribution in the oil Broad range of uses with many different oils and alone as a high-performance oil Lowest friction due to high lubricating effectiveness of MoS2 Fully stabilised without precipitation

Sheet gasket from expanded graphite with multilayer stainless steel foil reinforcement Characteristics Premium graphite gasket, reinforced by 0.05 mm multilayer stainless steel carriers in an adhesive free sandwich compound with the graphite layers. Purity 99.8 % High blow out safety and mechanical strength Practically no cold flow or creep under temperature Non hardening Excellent in use at cycling temperatures Reduced Emissions due to high sealability Built in safety against assembly and operational problems. Technical parameters pH 0 - 14 Temperature: t = -250 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 250 bar Main application Highly recognised as problem solving gasket material in all industries with higher pressures and temperatures and the demand on operation safety and sealability Suitable for In all industries Approvals BAM DVGW TA Luft FIRE SAFE API 607 Variant Economic grade alternative D 5.3 with multiple 0.05 mm stainless steel foil...

Modified PTFE reinforced with special silica filler Characteristics Protected against cold flow Excellent recovery Very good in applications with varying temperatures Reduced leakage rates compared to other filled PTFE gaskets under the same gasket stress. Technical parameters pH 0 - 14 Temperature: t = -180 … +230 °C, short term up to 260 °C Pressure: p = 55 bar Article code / Thickness FAWN 05 / 0.5 mm FAWN 10 / 1.0 mm FAWN 15 / 1.5 mm FAWN 20 / 2.0 mm FAWN 30 / 3.0 mm Main application Steel or other metal flanges on pipework Vessel Container Reactors in higher temperature applications. Suitable for Chemical and Petrochemical industry Approvals TA-Luft Form of delivery Gasket sheet size of 1,500 x 1,500 mm in thickness of 0.5 / 1.0 / 1.5 / 2.0 / 3.0 mm or cut gaskets according to drawing, or EN and international Standards, special dimensions on request.

Viscous Fan Drives and Controllers VMaster Di is an economically priced, reliable system that provides variable-speed fan control specifically tailored to your engine cooling requirements. J1939 compatible, VMaster Di is a plug-and-play system that keeps your engine at optimal operating temperature while reducing operating noise, saving fuel and increasing performance. The VMaster Di system also increases available horsepower for auxiliary components. This maintenance-free system is engineered to turn any 20-inch [508 mm] to 44-inch [1118 mm] plastic, metal or composite fans. Benefits - Reduces noise and saves fuel - Optimized cooling under all conditions - Better performance - Increased available horsepower for auxiliary components - More economical and safer than hydraulic systems Features - Variable-speed control - Customized algorithms for specific requirements - J1939 compatible - 12V/24V - Integral diagnostics - 70 percent fan speed override to meet the European noise directive - 105C temperature rating - Maintenance-free - Compatible with a wide range of fan sizes Applications - Skid steers - Truck cranes - Cement trucks - Refuse trucks - Medium-duty day cab class 7 – 4 trucks - Power generators - Other on- and off-highway Related Products - Stratis Viscous Fan Drives - Stratis Di Viscous Fan Drives and Controllers - VMaster® Air-Sensing Fan Drives - VMaster Directly Controlled Fan Drives - WindMaster Fans Links - Order or View Literature - On-line Catalog

VMaster® Viscous Air-Sensing Fan Drives The VMaster viscous air-sensing fan drive works smarter so your engine can work harder. Equipped with a bimetal precision sensor, the viscous air-sensing fan drive delivers the right amount of cooling required. A fan that operates at maximum speed only when cooling requirements demand it can cut fuel costs significantly over the life of the vehicle. Modulation enables the drive to regulate the fan speed between idle and maximum rotational speed depending on the air temperature, quickly responding to even small temperature fluctuations. This prevents temperature spikes while reducing the need for the fan to run at full speed. There is less likelihood of thermal shock damage, and noise levels are noticeably lower. Benefits - Optimum cooling under all conditions - Lower noise levels - Greater fuel economy - Less likelihood of thermal shock Features - Lightweight, modular, fully-sealed design - Fan speed modulation - Drive design allows use with fans from Horton Sachs or others - Stable crankshaft eliminates need for vibration damper Applications - Heavy-duty trucks - Medium-duty trucks - Light-duty trucks - Automotive - Off-highway equipment Related Products - MagForce Electromagnetic Fan Drives - VMaster Viscous Directly Controlled Fan Drives - WindMaster Fans - WindMaster Ring Fans Links - Order or View Literature - On-line Catalog

Stratis Di Viscous Fan Drives and Controllers Stratis Di is an economically priced, reliable system that provides variable-speed fan control specifically tailored to your engine cooling requirements. J1939 compatible, Stratis Di is a plug-and-play system that keeps your engine at optimal operating temperature while reducing operating noise, saving fuel and increasing performance. The Stratis Di system also increases available horsepower for auxiliary components. This maintenance-free system is engineered to turn any 20-inch [508 mm] to 44-inch [1118 mm] plastic, metal or composite fans. Benefits - Reduces noise and saves fuel - Optimized cooling under all conditions - Better performance - Increased available horsepower for auxiliary components - More economical and safer than hydraulic systems Features - Variable-speed control - Customized algorithms for specific requirements - J1939 compatible - 12V/24V - Integral diagnostics - 70 percent fan speed override to meet the European noise directive - 105C temperature rating - Maintenance-free - Compatible with a wide range of fan sizes Applications - Skid steers - Truck cranes - Cement trucks - Refuse trucks - Medium-duty day cab class 7 – 4 trucks - Power generators - Other on- and off-highway Related Products - Stratis Viscous Fan Drives - VMaster® Air-Sensing Fan Drives - VMaster Directly Controlled Fan Drives - VMaster Di Viscous Fan Drives and Controllers - WindMaster Fans Links - Order or View Literature - On-line Catalog