Technical production - Import export

Plastic cases in exclusive design for perfect protection of your products Top quality, technically designed product – torsion stiffened case shells resist "twisting" Optional transparent lid provides perfect product visibility With polished and textured surface label area

In addition to our wide range of oils, lubricants and fluids, we supply your business with technical accessories for smooth operation in the workshop, factory and production. Our technical products meet the highest quality standards and are produced by renowned brands. For the optimum selection of oil pumps, grease guns and storage technology for oils, greases and fluids, our specialist advisors will support you from the very first minute.

Thermoplastic all-plastic plain bearing | Maintenance-free COM-KU®/X is a self-lubricating and maintenance-free plastic plain bearing made of a high-quality plastic compound with the best sliding properties. Excellent tribological properties, especially for dry running. For technical details, please visit the product page on our website!

Sintered bronze plain bearings | Maintenance-free | Oil-impregnated | Self-lubricating | DIN 1850 / ISO 2795 SIB-MET® is a self-lubricating and maintenance-free plain bearing. Suitable for high speeds at low loads. Suitable for high sliding speed at low load capacity. For technical details, please visit the product page on our website!

Wrapped composite sliding bearing with lubrication pockets/ copper-plated steel & CuSn10Pb10 & graphite | maintenance-free | DIN 1494 / ISO 3547 BIV-LUB® is a maintenance-free composite plain bearing with solid lubricant depots. Initial lubrication is necessary! High load capacity with low wear, very suitable for low sliding speeds and oscillating movements. For technical details, please visit the product page on our website!

Wrapped composite sliding bearing with lubrication pockets/ copper-plated steel & AlSn20Cu | Low-maintenance | DIN 1494 / ISO 3547 For high sliding speeds, optimum sliding behaviour with good lubricant supply. BIV-MET®/A is a composite sliding bearing requiring maintenance; oil or grease lubrication is needed. For technical details, please visit the product page on our website!

Wrapped composite sliding bearing with lubrication pockets/ copper-plated steel & CuSn10Pb10 | Low-maintenance | DIN 1494 / ISO 3547 BIV-MET® is a low-maintenance bronze plain bearing. However, initial lubrication is required—both oil and grease lubrication are possible. Due to the lubricant depots, the relubrication intervals are greatly reduced! For high loads and oscillating movements as well as for rough operation and temperature load. For high load capacity and oscillating movement, as well as for rough operation and temperature load. Long-run lubrication because of lubricant storage. For technical details, please visit the product page on our website!

Wrapped composite sliding bearing with lubrication pockets/ CuSn8P & graphite | maintenance-free | DIN 1494 / ISO 3547 BRO-LUB is a maintenance-free bronze plain bearing with solid lubricant depots. Initial lubrication is necessary! High load capacity with low wear, very suitable for low sliding speeds and oscillating movements. For technical details, please visit the product page on our website!

Wrapped bronze sliding bearing with lubrication holes/ CuSn8P (DIN 17662) | Low-maintenance | DIN 1494 / ISO 3547 BRO-MET®/L is a low-maintenance bronze plain bearing. However, initial lubrication is required—both oil and grease lubrication are possible. The hole depots reduce the relubrication intervals even more! High load capacity and strength with low wear, suitable for rough operation, corrosion resistant. High load capacity and stability at low abrasion. Because of perforations lubrication clearances are reduced to a minimum! For technical details, please visit the product page on our website!

Wrapped bronze sliding bearing with lubrication pockets/ CuSn8P (DIN 17662) | Low-maintenance | DIN 1494 / ISO 3547 BRO-MET® is a low-maintenance bronze plain bearing. However, initial lubrication is required—both oil and grease lubrication are possible. Due to the lubricant depots, relubrication intervals are significantly reduced! High load capacity and strength with low wear, suitable for rough operation, corrosion resistant. High load capacity and stability at low abrasion, suited for rough operation, corrosion resistant. For technical details, please visit the product page on our website!

Wrapped composite sliding bearing steel / POM | low-maintenance | With lubrication pockets | DIN 1494 / ISO 3547 POM-MET® is a low-maintenance composite sliding bearing with a POM coating. Initial lubrication is required. Both oil or grease lubrication are possible. Due to the lubricant pockets, relubrication intervals are significantly reduced! Suitable for all sliding movements, good load capacity, robust and resistant to dirt. Suitable for grease or oil lubrication and all kinds of movement, good load capacity, robust and insensible to dirt. For technical details, please visit the product page on our website!

Wrapped composite sliding bearing Stainless steel / PTFE coated | Maintenance-free dry sliding bearing | Corrosion resistance | Chemical resistance | DIN 1494 / ISO 3547 NOX-MET® is a versatile, corrosion-resistant dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! Excellent sliding and wear behaviour, high load capacity, shock resistant, chemically resistant against acids and bases (ph-value 0-14), corrosion resistant. For technical details, please visit the product page on our website!

Wrapped composite sliding bearing steel / Special PTFE coated Maintenance-free dry sliding bearing | DIN 1494 / ISO 3547 TEF-MET/P is a versatile dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, it is very well suited for lubricated applications (e.g. hydraulic oil lubrication). For technical details, please visit the product page on our website!

Rolled composite plain bearing steel / PTFE coated | Maintenance-free dry plain bearing | DIN 1494 / ISO 3547 TEF-MET/B is a versatile, corrosion-resistant dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! Excellent sliding and wear behaviour, for all types of movement, high load capacity, good corrosion resistance, non-magnetic. For technical details, please visit the product page on our website!

Wrapped composite plain bearing steel / PTFE coated | Maintenance-free dry plain bearing | DIN 1494 / ISO 3547 TEF-MET is a versatile dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! Excellent sliding- and wear behaviour, for all types of movement, high load capacity, all-round adaptable. For technical details, please visit the product page on our website!

Rolled composite plain bearing | Maintenance-free | Steel / graphite bronze | With embedded solid lubricants GAP-MET®/S is a maintenance-free composite plain bearing. However, oil or grease lubrication is possible. High load capacity and strength, for all slow movement types, suitable for contaminated environments, no moisture absorption, good chemical resistance. For technical details, please visit the product page on our website!

Filament-wound composite bearing with self-lubricating inner | Surface backed with a high-strength | Maintenance-free | With a sliding layer of PTFE with lubricant additives COM-KU®/M is a self-lubricating and maintenance-free plastic plain bearing. Using a heavy-duty glass fibre fabric combined with a selected binder resin helps to increase the mechanical properties, pressure further and wear resistance of this bearing type. The special lubricant additives and the PTFE in the sliding layer reduce the friction coefficient, optimising the wear behaviour and thus the material's service life as a dry sliding bearing. For technical details, please visit the product page on our website!

Wrapped spring steel plain bearing | Requires maintenance | DIN 1498 | DIN 1499 FER-MET® is a spring steel plain bearing without integrated sliding material. Lubrication of the bearing point is necessary. Very high load capacity and impact resistance for heavy-loaded applications with impact loads. Very wear-resistant. A standard gap design with a straight slot and without chamfer inside [EG], but can also be manufactured with other slot shapes if required. For technical details, please visit the product page on our website!

Solid, turned, grinded and hardened steel plain bearing | Requires maintenance FER-MAS® is a steel plain bearing without integrated sliding material. Good lubrication is required! Suitable for highest loads, insensitive, long service life. For technical details, please visit the product page on our website!

Solid bronze plain bearing | Maintenance-free | With solid lubricant deposits in the sliding surface | Version available with water-resistant solid lubricant LUB-MET® is a maintenance-free plain bearing. However, initial lubrication is necessary. For high loads, shock loads, wear-resistant, insensitive to dirt, corrosion-resistant, long service life. For technical details, please visit the product page on our website!v

Machined bronze plain bearing | Requires maintenance | DIN 1850 / ISO 4379 BRO-MAS® is a plain bearing requiring maintenance, is suitable for operation in contaminated environments, has good corrosion resistance, and is insensitive to shock loads. Oil or grease lubrication is needed. Additional lubrication grooves or holes significantly reduce relubrication intervals and improve lubricant distribution. For technical details, please visit the product page on our website!

Solid sintered bronze bearing | Maintenance-free | With uniformly embedded solid lubricant in the bronze or iron matrix GAP-MET®/M is a maintenance-free plain bearing. However, oil or grease lubrication is possible. High load capacity and strength for all slow movement types, suitable for contaminated environments, no moisture absorption, good chemical resistance and good temperature resistance. The parts are mechanically reworkable. For technical details, please visit the product page on our website!

Easy and self-explanatory For smooth work in physiotherapy facilities: with proxotrain, you can optimise planning, implementation, management, assessment and documentation of training and perform isometric and dynamic tests. The software allows work with the chip card; it is self-explanatory and therefore easy to operate. Accessories In conjunction with the optionally available workoutpoint, free exercises can also be planned, performed, managed and documented and saved on the chip card. Detailed assessment and documentation of the test results Detailed assessment and documentation of the training results Use of training plans and training plan templates Note regarding expiring training plans previous product Technical data Dimensions (L/W/H) 46/52/122 cm Total weight approximately 18 kg (excluding SmartPanel and cockpit) Equipment At the proxomed workoutpoint, a variety of free exercises for invigoration, stretching and coordination can be planned and performed. It is...

previous product Technical Data Dimensions (L/W/H) 204/65/165 cm Total weight 103 kg Maximum user weight 150 kg Mains-independant operation Performance range graduation in 5 watt steps 15 - 500 Watt pedaling speed independent 15 - 1.000 Watt pedaling speed dependent Speed range 20 - 120 rpm High quality plain and ball bearings for long durability Equipment Integrated chip card system Safety stop Elliptic complete body training Ergonomic smooth motion cycle Forward and backwards rotation possible Large, anti-slip pedals Speed limit for more safety possible 3 Training programmes (quickstart, watt (timetraining), pulse) Multicoloured background lighting with feedback function for correct training performance Pulse receiver, polar-coded Options 200 kg user weight Additional training and test programmes

Harmonious overall concept MTT pulleys, couches and training benches produce an overall concept that has economical solutions for all sizes of practice. Important for your practice: you offer your patients all phases of individualised muscle development training. compass training benches (MTT) Our MTT training benches ensure variety in therapeutic exercises. With high adjustability, you have all the options for individualised positioning. You can thus take advantage of a variety of anti-gravity training variants, for example for training the trunk muscles in the lumbar area. Therapeutically sensible and economical Medical training therapy is a financially interesting core service for every physiotherapy practice. From the small starting solution to the fully equipped health centre, we offer you suitable solutions. Wide selection of colours suitable to your practice equipment Training opportunities for the skeletal muscles as a whole previous product Technical data Dimensions...

is an ester of the acetic acid and ethanol. That is why it has also following names: Acetic acid ethyl ester or acetic ester. It can also be obtained from acetaldehyde. For the industrial use ethyl lactate is obtained from lactic acid. Mostly processed by fermentation of sugar. Therefore it is a salt of lactic acid. The chemical term for the substance is ethyl (S)-2-hydroxypropionate. The product is a clear liquid, smelling like glue. It is easily soluble in water and organic substances. The dangerous goods term is UN 1192 Ethyllactat,3,III,(D/E). The product is availabe for the food (FCC) and technical sector. In this product sector we work together with the european manufacturers Corbion / Purac (Purasol ® ) and Galactic (Galaster ™).

Cleaner, solvent-based or without labelling obligation, technical and medical products, cosmetic products in different packagings, pump sprays, canisters, barrels