Results for
LEONI DRAHT GMBH
Germany
Tubular-knitted copper tape made from Cu-ETP1 and Cu-OF1 in tin-plated, bare upon request, soft annealed. Single wire diameter Ø 0.10 mm, processed in 1 x 0.10 mm or 2 x 0.10 mm. Width 25 mm. For electrical shielding.
Request for a quoteLEONI DRAHT GMBH
Germany
Shielding braids consist of bobbin wires, located parallel, which have been braided into a tube. Manufactured from Cu-ETP1, Cu-OF1, LEONI-Histral®-alloys (upon request), aluminium and stainless steel, with coating in bare, tin-plated, nickel-plated or silver-plated, hard or soft annealed. Sinlge-wire diameter ranging from Ø 0.10 mm to Ø 0.40 mm. Cross-section ranging from 0.25 mm² bis 400 mm². Tubular shielding braid is smoothly expandable and has a very good shielding effect. The couverage can be determined precisely by changing the braiding angle. Suitable for electrical and mechanical shielding of wires, cables, cable bundles and cable harnesses.
Request for a quoteLEONI DRAHT GMBH
Germany
Flat-knitted copper tape made from Cu-ETP1 and Cu-OF1 in tin-plated, bare upon request, soft annealed. Single wire diameter Ø 0.10 mm, processed in three-fold and eight-fold. Width of flat-knitted copper from 20 mm to 100 mm. For electrical shielding.
Request for a quoteLEONI DRAHT GMBH
Germany
Round copper wire made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys, in bare, tin-plated, nickel-plated and silver-plated, soft annealed. Single wire diameter ranging from Ø 0.05 mm to Ø 0.254 mm. Number of wires used for strands: between 2 and 16 (subject to single-wire diameter). Single wire or multi wire on special bobbins fit for use in braiding machines. The braids manufactured by these machines are used in cables and conductors geared towards electromagnetic shielding or protection against damage as well as serving as a reinforcement.
Request for a quoteK-TECH ELECTRONIC VERTRIEBS GMBH
Germany
pink cover made from low tribocharging and dissipative LD/HD/LP polyethylene 3 layers pink PE colamination ideal for pallets protection several models available on request
Request for a quoteK-TECH ELECTRONIC VERTRIEBS GMBH
Germany
bags made from shielding film combined with low tribocharging and dissipative amines free air bubble film offering superior mechanical protection only available without ZIP supplied with a 30mm lap several sizes available on request also available in rolls (length 100 m)
Request for a quoteK-TECH ELECTRONIC VERTRIEBS GMBH
Germany
metallized transparent shielding bags for protection of static sensitive components available with or without ZIP heatsealable with ESD standard print customized sizes available on request
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
The EM 600 can integrate up to six successive process tools in one single station. After insertion, the cable remains in a fixed position while the tools move towards the cable to provide optimum protection for the HV cable wires. The total cycle time of an EM 600 station is approx. 35 seconds for all operations of this station, with a total capacity of approx. 400,000 cable ends per year.
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
Metzner offers low-cost individual stations in the field of e‑mobility for the entry into high-voltage cable processing. For the first time, the EM 101 module offers a solution for removing the cable foil without affecting the cable shield. The automatic processing of high-voltage cable wires also necessitates the connection of various components of the connector system. The Metzner EM 102 takes care of this. The EM 103 allows the cable shield to be opened and cut using a patented process which ensures that there is absolutely no contact with the inner insulation. The EM 103S offers the functionality of the proven EM 103 to meet the requirements of smaller cable wires of up to 8 mm diameter. These cost-effective models cannot be integrated into an automation line and are equipped with only limited traceability functions.
Request for a quotePPS GMBH
Germany
So called windshieldlabels with integrated UHF-Antenna can open contactlessly gates or bars from the windshield of the car. UHF labels can be read, depending on the reading unit, up to several meters and are suitable for the use in cars. Therefore a special temperature resistant material made from Polycarbonat composite material, that fulfills the special requirements in the vehicle. This technique is also commonly used in the industry. Products, skeleton container or boxes can be equipped with UHF labels and are automatically scanned during transport. This assures a consistent and automatic recording of all steps made in the factory. Also Standard Plastic cards or tags can contain UHF antennas and provide contactless Access control for employees or visitors. The team from PPS is there for you on the phone or send us an E-Mail.
FRÄNKISCHE INDUSTRIAL PIPES GMBH & CO. KG
Germany
Our corrugated tubes or hoses for windshield and headlamp washer systems can be supplied with one or two mounted Quick connectors as fully assembled units. The Quick connector is a reliable way to connect a corrugated tube to the connecting cuff and allows for quick and easy assembly or disassembly. Our product line includes a wide range of accessories and diameters. Application: Automotive, agricultural machinery and construction engines; for applications in headlight cleaning systems
Request for a quoteFIBALON GMBH
Germany
The already simple application of our innovative polymer fiber filter FIBALON® is made even easier with our new FIBALON®rope. 8, FIBALON® nets arranged like on a rope of pearls for almost all common pool filters. The filter material can be removed and replaced with just one handgrip. Our special mesh ensures optimal alignment and orientation of the FIBALON® filter balls during the filtration process. In addition, the net acts similarly to a protective shield. By means of a special welding technique, both the net and the welding seams, are chemically- and in particular chlorine-persistent. Due to the use of the new FIBALON®rope, the application of our backwashing grid is obsolete. For FIBALON®rope we also use our optimized fiber combination and other process innovations offers an incomparably high selectivity of 8 microns. All advantages of FIBALON®3D can be adapted and it promises an even easier handling.
Request for a quoteINVER GMBH
Germany
Quality assurance through internal quality control , the quality characteristics like Light transmittance clarity Minimum thickness of the individual plates / packages are ensured.
Request for a quoteINVER GMBH
Germany
Length : any Width : any Thickness : any Quality: as required, including " green " Ends : any
Request for a quoteINVER GMBH
Germany
Diameter : any Thickness: Single disc 0.20 mm , packages 0.40 to 1.00 mm Quality: Ruby standard " A " (Quality V5) other quality on request
Request for a quoteINVER GMBH
Germany
Length: 100-500 mm Width: 24 mm Thickness: 0.80 to 1.70 mm Quality: Ruby stained " A " and Ruby stained " B " (Quality V5 and V6) other quality on request Ends : round
Request for a quoteINVER GMBH
Germany
Length: 100-500 mm Width: 34 mm Thickness: 0.165 to 0.20 mm , or 0.20 to 0.30 mm Quality: Ruby staind " A " and Ruby staind " B " (Quality V5 and V6) other quality on request Ends : round
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Shields - Import exportNumber of results
18 ProductsCompany type