Results for
KORRODIN GMBH & CO. KG
Germany
Korrodin is your supplier for all parts in special materials and surfaces. We offer you every article in all conceivable materials. From stainless steel (A1, A2, A4), steel, titanium, brass, copper to Nitronic and Kurprodur. There are also no limits to the surfaces.
Request for a quoteKORRODIN GMBH & CO. KG
Germany
Korrodin is your specialist for individual C-parts management (supply concept). Korrodin offers you a C-parts management (supply concept) which is precisely adapted to your requirements. Our C-parts management saves you time and effort when procuring your B and C parts.
Request for a quoteKORRODIN GMBH & CO. KG
Germany
Korrodin offers you the entire range of ISO and DIN standard parts for fastening technology. We procure every DIN or ISO part in connection with the connection technology. Whether screws, washers, nuts, grooved pins, cylinder pins and many more.
Request for a quoteTANOS GMBH
Germany
A big choice for small loads. With the new and practical height of the MINI-systainer® T-Loc III, you have even more options for storing products in a space-saving manner. New features of the MINI-systainer® T-Loc III include fully-functional card compartments, with label sets available as accessories. Of course, the MINI-systainer® T-Loc III can be attached to the MINI-systainer® T-Loc I as usual. * The exterior dimensions, measured without the feet, are: H + 4.7 mm Outside dimensions H* 142 x W 265 x D 171 mm Inside dimensions H 124 x W 254.5 x D 154.5 mm Weight: 0.60 kg * The outside dimensions are measured without feet: H + 4.7 mm
Request for a quoteTANOS GMBH
Germany
Consisting of MINI-systainer® incl. EPP cover insert and 6-compartment deep-drawn tray Interior dimensions of compartment: L 73 x W 67 x D 42 mm Suitable for sorting small components in the MINI-systainer®, such as saw blades, drill bits, etc. systainer® material: ABS Cover insert material: EPP moulded foam Deep-drawn tray material: recycled PS
Request for a quoteTANOS GMBH
Germany
Body with lid: light grey (RAL 7035) Catch: signal blue (HKS 43 K) Outside dimensions H* 71 x W 265 x D 171 mm Inside dimensions H 53 x W 254.5 x D 154.5 mm Weight: 0.43 kg * The outside dimensions are measured without feet: H + 4.7 mm Exterior dimensions H* 7.10 x W 26.50 x D 17.10 cm Interior dimensions H 5.30 x W 25.45 x D 15.45 cm Weight: 0.40 kg
Request for a quoteTANOS GMBH
Germany
Consisting of MINI-systainer® incl. cover insert, EPP and universal deep-drawn 8-compartment tray Interior dimensions of compartments: - 6 compartments L 41 x W 41 x D 42 mm - 1 compartment L 88 x W 88 x D 42 mm - 1 compartment L 241 x W 48 x D 42 mm Suitable for sorting small components in the MINI-systainer®, such as saw blades, drill bits, etc. systainer® material: ABS Cover insert material: EPP moulded foam Deep-drawn tray material: recycled PS With lid insert, EPP and universal insert with 8 divisions
Request for a quoteTANOS GMBH
Germany
MINI-systainer® T-Loc III completely fitted with boxes, 3-compartment deep-drawn tray and cover insert. Base tray with multicoloured removable individual boxes This combination of multicoloured boxes and deep-drawn trays offers excellent flexibility for storing small components. Multicoloured boxes and base tray are also available separately Ribbing is integrated into the base tray to ensure the individual multicoloured boxes remain in place with the lid closed. An excellent choice for sorting small components in a systainer®, such as jigsaw blades, drill bits, screws, etc. systainer® material: ABS Cover insert material: EPP moulded foam Deep-drawn tray material: PS plastic Box material: PS plastic
Request for a quoteTANOS GMBH
Germany
Consisting of MINI-systainer® T-Loc I incl. EPP cover insert and 3-compartment deep-drawn tray Interior dimensions of compartment: L 229 x W 42 x D 42 mm Suitable for sorting small components in the systainer®, such as saw blades, drill bits, etc. systainer® material: ABS Cover insert material: EPP moulded foam Deep-drawn tray material: recycled PS With lid insert, EPP and insert with 3 divisions
Request for a quoteBEDIA MOTORENTECHNIK GMBH & CO. KG
Germany
Temperature is one of the most measured physical parameters. Despite this, precise temperature measurement is one of the most difficult tasks in motor technology. To meet the constantly increasing requirements for improved motor performance, higher efficiency and reduced emissions, it is necessary to use reliable and precise sensors in modern motor control systems. The increased requirements over the last few years regarding measurement accuracy and reliability of temperature measurements has meant that many equipment operators must reconsider the suitability and performance capacity of their temperature measurement equipment. Resistant thermometers can be used between -200 °C and +850 °C. An important common property is that their output parameters are available in the form of electric signals that can be relatively easily transferred to measurement and control instruments for processing, storage and display.
Request for a quoteLINDNER SPRÜHSYSTEME GMBH
Germany
other colours and thread sizes upon request https://www.lindner-kunststoffprodukte.de/wp-content/uploads/2019/04/Lindner-Schraubverschluesse.pdf
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Coating of threads with galvanized surfaces and high-alloy steel threads to achieve controlled friction values Prevents cold-fretting Advantages and benefits Economical through low consumption (can be diluted with tap water) The coating can be checked easily through a fluorescent ingredient Tools and containers can be cleaned with water Does not contain any toxic components and is therefore sanitary harmless The water-soluble ingredients are biodegradable, the water-nonsoluble ingredients are ecologically neutral With an inhibitor, which prevents from corrosion during the drying
Request for a quoteAWK VERSCHLÜSSE GMBH & CO KG
Germany
Plastic free cover cap for glass bottles
Request for a quoteRUF MASCHINENBAU GMBH & CO. KG
Germany
Based on a individual needs assessment we tailor-make briquetting solutions including peripheral devices. RUF- Charging hopper with screw conveyor for charging & transporting of bulk material as aluminium, steel, stainless steel, other metals, wood, other bulk materials.
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Countersunk screws - metal ~DIN 963 (~DIN EN ISO 2009) Material: machining steel 4.8 zinc-plated
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Countersunk screws - metal ~DIN 963 (~DIN EN ISO 2009) Material: stainless steel A2
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Hexagon head screws - metal ~DIN 933 (~DIN EN ISO 4017, threaded to head) Material: machining steel 4.8 zinc-plated
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SYSKOMP GMBH - EMICO
Germany
Pan head screws - metal ~DIN 85 (~DIN EN ISO 1580) Material: machining steel 4.8 zinc-plated
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Pan head screws - metal ~DIN 85 (~DIN EN ISO 1580) Material: stainless steel A2
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Lens head screws - metal, cross slot ~DIN 7985 (~DIN EN ISO 7045 - form H) Material: machining steel 4.8 zinc-plated
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Lens head screws - metal, cross slot ~DIN 7985 (~DIN EN ISO 7045 - form H) Material: stainless steel A2
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Countersunk screws with cross slot ~DIN 965 (~DIN 34811) Minimum order quantity: 1,000 pcs. per dimension and order Material: PA 6.6 Colour: natural
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Raised countersunk screws ~DIN 964 (~DIN EN ISO 2010) Minimum order quantity: 1,000 pcs. per dimension and order Material: PA 6.6 Colour: natural
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Countersunk head screws with slot ~DIN 963 (~DIN EN ISO 2009) Material: PVDF Colour: natural
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Countersunk head screws with slot ~DIN 963 (~DIN EN ISO 2009) Material: PP Colour: natural
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Countersunk head screws with slot ~DIN 963 (~DIN EN ISO 2009) Minimum order quantity: 500 pcs. at M3 200 pcs. at M4, M5 + M6 100 pcs. from M8 Material: PA 6.6 Colour: natural
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Hexagon head screws ~DIN 933 (~DIN 34810) Material: PVDF Colour: natural
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Hexagon head screws ~DIN 933 (~DIN 34810) Material: PP Colour: natural
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Hexagon head screws ~DIN 933/931 (~DIN 34810) Minimum order quantity: 500 pcs. at M3 200 pcs. at M4, M5 + M6 100 pcs. from M8 Material: PA 6.6 Colour: natural
Request for a quoteResults for
Screw it - Import exportNumber of results
60 ProductsCompany type