Pumping systems - Import export

The conveyance of highly viscous products is part of our technical expertise. Feed pumps must meet the requirements for a long useful life, low maintenance and wear-free operation. We at IFA Technology live up to this claim by installing the most suitable pump in each of our systems. We use all types of pumps, from centrifugal pumps to gear pumps and piston pumps. Depending on the type of medium and its application requirements, we can design and offer you the suitable shaft seal. This includes among others packing gland seals, mechanical seals or magnetic couplings.

The ViscoMT-XS hobbock emptying system offers a modern way of emptying containers.The following advantages result from the use of eccentric screw pumps for the removal of the medium: - container sizes from approx. 5 l to 50 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers - direct dosing as pulsation-free flow rate

The ViscoMT-D bin emptying system offers a modern way of emptying small containers and bins cleanly. The use of our dispenser series for the removal of the medium offers the following advantages: - container sizes from approx. 100 ml to 5 l - viscosities of approx. 80,000 - 1,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of filler-loaded material - no backflow within the withdrawal pump - electrical control of the pump with pressure control - direct dosing from the container possible - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: Removal of materials directly from the delivery container, e.g. silicones, adhesives, resins, fats, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes)

The ViscoTreat-R preparation and feeding system ensures an even and reliable product supply. At the same time, the medium is optimally prepared for the production process by stirring and circulating. The use of the VRP dispenser series for the further transport of the medium offers the following advantages: optimal processing of viscosities up to 50,000 mPas very low shear stress of the medium very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - no air supply necessary - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - Stator material is adapted to the medium to be pumped Application: - Feeding and processing of medium to highly sensitive media, e.g.: Silicones, adhesives, resins, greases, colour pastes, metal-filled pastes

The ViscoMT-XL drum emptying system offers a modern way of emptying containers. The following advantages result from the use of eccentric screw pumps for the removal of the medium: - container sizes from 50 l - viscosities of approx. 80,000 - 2,000,000 mPas - Bridge frame can be driven underneath with drums on pallets - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers

The ViscoMT-L 3 / 18 barrel emptying system offers a modern way of emptying containers.The connection with the ViscoTec VMP dispenser series for the removal of the medium offers the following advantages: - container sizes from approx. 50 l to 300 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - removal of materials loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: Removal of materials directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers

UNIVERSAL HEAT TRANSFER FLUID WITH FROST AND CORROSION PROTECTION PRODUCT DESCRIPTION Antifrogen® N is a monoethylene glycol-based, yellow- colored heat transfer fluid for industrial applications such as hot water heating, cooling and air conditioning systems, heat pump systems and wind turbines, but can also be used in rail vehicles or to fill Clariant leak indicators. Antifrogen® N contains a highly efficient combination of inhibitors that offer long-lasting corrosion protection in your systems. The frost resistance depends on the mixing ratio with water (chloride content <100 ppm, water hardness 0° - 25° dH) and must be at least 20% v/v Antifrogen® N (corresponds to frost protection down to -9 °C). Antifrogen® N is free of nitrite, amine, borate, phosphate and silicate

UNIVERSAL HEAT TRANSFER FLUID WITH FROST AND CORROSION PROTECTION PRODUCT DESCRIPTION Antifrogen® N is a monoethylene glycol-based, yellow- colored heat transfer fluid for industrial applications such as hot water heating, cooling and air conditioning systems, heat pump systems and wind turbines, but can also be used in rail vehicles or to fill Clariant leak indicators. Antifrogen® N contains a highly efficient combination of inhibitors that offer long-lasting corrosion protection in your systems. The frost resistance depends on the mixing ratio with water (chloride content <100 ppm, water hardness 0° - 25° dH) and must be at least 20% v/v Antifrogen® N (corresponds to frost protection down to -9 °C). Antifrogen® N is free of nitrite, amine, borate, phosphate and silicate , and contains neither CMR substances (Cancerogenic Mutagenic

Magnetic ball bearings are increasingly important in CO2 laser systems and fluid pumps as well as applications in the optics industry. GMN has led the development and manufacture of safety bearings, so-called ‘touchdown bearings’ since the middle of the 1990s."

IFA Technology offers you suitable systems for filling and/or emptying tank trucks - both for dry bulk materials and for liquids. For this purpose, screw conveyors, pneumatic conveying systems or pumps are for instance used. We consider your individual requirements and build customised tank filling systems and tank emptying systems for you. We develop holistic solutions that are tailored to your requirements and can be integrated into the control of your production process with the appropriate sensor technology. This enables optimum functionality and operating safety.

Leistritz Multiphase pump systems are in operation worldwide. They are designed for running with high gas volume fractions (GVF) and gas bubbles with up to 100% gas content as well as for capacities of up to 5,000 m³/h and differential pressures of up to 150 bar. In comparison with traditional upstream installations, multiphase pumps need neither space-intensive separation devices at the borehole nor separate pumps, compressors or pipelines to transport gas and fluid to the central collection areas. Multiphase pumps are a cost-effective technology for the transportation of multiphase fluids using just a single pipeline - instead of separating the oil, water and gas at the collection areas and exporting the oil and gas to the central production facilities via separate pipelines. In general, multiphase pumps are a way to accelerate the unprocessed gas/fluid mixture.

Multiphase pumps are successfully used for onshore applications around the world. The technology has become firmly established among the global oil and gas producers since it allows production to be maintained on small oil fields with declining production as well as making the reduction of the flaring of petroleum gas possible as a contribution to a clean environment.

Leistritz Multiphase pump systems are in operation worldwide. They are designed for running with high gas volume fractions (GVF) and gas bubbles with up to 100% gas content as well as for capacities of up to 5,000 m³/h and differential pressures of up to 150 bar. In comparison with traditional upstream installations, multiphase pumps need neither space-intensive separation devices at the borehole nor separate pumps, compressors or pipelines to transport gas and fluid to the central collection areas. Multiphase pumps are a cost-effective technology for the transportation of multiphase fluids using just a single pipeline - instead of separating the oil, water and gas at the collection areas and exporting the oil and gas to the central production facilities via separate pipelines.

LIQUID Sub-cutaneous Atmospheric squeeze dropper systems Multidose Standardized application system to squeeze drops in a multiple use. The 100% control of the dropper guarantees the functionality. Furthermore, the tamper evident screw cap ensures the integrity of the product throughout the shelf life. Atmospheric container for pump application Multidose Although products seem to be widely established and standardized, there is always a chance for improvement. For example with the unique and patented cross section bottom design of the 10 ml, 20 ml and 30 ml HDPE bottle, suitable for 20 mm snap on pumps. System Benefits (B2B) Dip tube no longer touches the bottle during assembly of the pump Avoids line stops during pump assembly Consumer Convenience (B2C) Regularity of the residual volume NNo risk of malfunction due to bended dip tubes

Suction capacity 125 to 1400 m³/h; Vacuum to 33 mbar abs.; Discharge pressure to 2.0 bar abs. The NASH 2BM1 magnetic drive pump series is capable of achieving volume flow rates of 125 to 1400 m³/h and vacuum of 33 mbar abs. Non-contact torque transmission is achieved by using a permanent magnetic drive system. The pump's inner working space is hermetically sealed from atmospheric conditions, eliminating any possibility of leakage. This seal is essential for demanding applications, such as processes that are required to meet the most stringent standards on environmental compatibility. ATEX applications are also possible, certifications are available.

Priming Valves for Liquid Ring Vacuum Pumps Gardner Denver Nash priming valves were designed specifically to be used in Nash vacuum pump priming systems. They are extremely simple, dependable and durable. It has been proven in successful service for nearly fifty years. A Nash vacuum system is often used to prime one or more centrifugal pumps located above the free liquid levels of their suction sources. Vacuum draws liquid up until it fills each pump's suction line and floods its volute. This condition can be established before the pump is started up, so that it is always primed and ready to begin pumping. A Nash vacuum system is often used to prime one or more centrifugal pumps located above the free liquid levels of their suction sources. Vacuum draws liquid up until it fills each pump's suction line and floods its volute. This condition can be established before the pump is started up, so that it is always primed and ready to begin pumping

Suction capacity 125 to 1400 m³/h; Vacuum to 33 mbar abs.; Discharge pressure to 2.0 bar abs. The NASH 2BM1 magnetic drive pump series is capable of achieving volume flow rates of 125 to 1400 m³/h and vacuum of 33 mbar abs. Non-contact torque transmission is achieved by using a permanent magnetic drive system. The pump's inner working space is hermetically sealed from atmospheric conditions, eliminating any possibility of leakage. This seal is essential for demanding applications, such as processes that are required to meet the most stringent standards on environmental compatibility. ATEX applications are also possible, certifications are available.