Precision optics - Import export

Optical micrometers from Micro-Epsilon operate according to the transmitted light principle (ThruBeam micrometer). Here, the transmitter produces a parallel light curtain that is transmitted via a lens arrangement into the receiver unit. The beam is interrupted if an object is in the light path. The resulting shadowing is detected by the receiving optics and output as measurement value. Most optical micrometers are used for dimensional measurements in production, machine monitoring and quality assurance. Parameters such as diameter, gap, height and position are detected with high accuracy.

The optoCONTROL 2520 is a compact laser micrometer with integrated controller. A high resolution, model variant with measuring ranges of 46 mm and 95 mm as well as variable mounting distances allow a wide range of applications in quality monitoring and production control. The measurement object can be placed at any position within the light curtain and the distance from transmitter to receiver can be freely selected.

The optoCONTROL 1200 is based on the principle of light quantity measurement. The compact laser micrometer has all the evaluation electronics integrated in the case and the mounting is very flexible. High dynamic applications can be measured due to the measuring rate of 100 kHz.

The optoCONTROL 2700 is a compact LED micrometer for the precise measurement of diameter, gap, edge and segment. The micrometer is characterized by its high accuracy with a measuring range of 40 mm. As the controller is integrated in the receiver, the cabling and installation work is reduced to a minimum. Thanks to the active inclination correction, objects tilted by up to 45° are also detected extremely precisely. The configuration is performed conveniently via the web interface and enables the parameters set up of video signal, filter and different measuring modes. In set-up mode, a shadow image can be used for simple alignment of the measuring object. The excellent price-performance ratio rounds off the service package.

Control of thread density / course density / basis weight The Famacont PMC determines the thread density by means of a non-contacting, optoelectronic or imaging process. With the optoelectronic process individual threads or courses pass the sensor and are projected onto the photocell using a precision optical lens. The resulting frequency is proportional to the thread count. A high-resolution camera is used with the imaging process. The image is analysed with using suitable software (FFT analysis). Both, the thread count in weft and warp direction can be determined here with maximum precision.

Lubrication, cleaning and protection of bright metal surfaces, e.g. of precision machine tools, measuring equipment, mechanisms in precision mechanics and optics, of precision instruments Can be used at machine elements of all types, for example sliding parts or slideways, at threads, locks, hinges, joints, drives Versatile use over the full range of care, conservation and maintenance applications Advantages and benefits Highly effective due to good wetting, dissolving and protective ability Good creep properties Behaves neutrally with respect to plastics, elastomers and paints Good protection against corrosion-causing moisture and wetness Resin and acid-free OKS 700 is also suitable for use with the refillable Airspray system Also available as spray version OKS 701

During the production of inner liner, the thickness profile of inner liner material is measured immediately after the calender using systems of the thicknessCONTROL TIP series. Accurate precision of the non-contact optical system ensures high quality and security of the product produced. Sensors belonging to the thicknessCONTROL RTP series can also be applied for this application.

For lubrication points of all kinds as slide ways, spindles, geared parts of the electronic, precision engineering and optical equipment, temporarily or permanently exposed to extreme low temperatures like in arctic climates or cold storages Roller bearing lubrication of high-speed bearings, e.g. spindle bearings, miniature or precision bearings in machine-tools or textile machines, measuring equipment, electric motors of control technology and precision mechanics Advantages and benefits Dynamic light noise proofed long-term lubrication grease Best use at arctic conditions and very high speed High efficiency through optimal formulation Multifunctional application beside the regular range of performance for greases Efficient through economical application No nameable change of consistency at low temperatures or high speeds and accordingly temperatures

TOPTICA's high-power single-frequency diode lasers are ideal coherent laser sources for a multitude of demanding applications, including lithography, optics test & inspection and holography. These lasers pave the way to manufacture high-quality optics for Augmented Reality (AR), Virtual Reality (VR) or Mixed Reality (MR). For example, ultra-precise optical gratings are easily produced with these laser systems to fabricate hologram projections or holographic safety features.

ETC Source Four Zoom XT 150W 15°-30° white ETC combines the industrys standard Source Four Zoom optical system with a unique, waterlight housing to create the Source Four Zoom XT. Powered by the 12.000 hour Master ColorTM CDM lamp, Zook eX is rated IP 65 for exterior lighting use and is ideal for gobo / pattern projection and tight shutter cuts on specific structures or architectural details. The forward portion of the housing removes completely for beam sizing, focus, gobo insertion and shutter cut adjustments. The removable housing is designed to hang conveniently on the yoke, freeing both hands for focus. ETC Source Four 150W HID Zooms are supplied with Philips CDM Master Color 150W veramic metal halide lamp, colour frame and 1,8m cable without connector. Feature Physical Rugged, the cast and extruded aluminium construction unique waterlight exterior housing seal Precision extruded optical rails with positive lens position lock-down 20 gauge stainless steel shutters in a tri-plane assembly Roating shutter assembly +/- 25° slot for glass or stainless steel gobos / patterns waterlight electronic ballast housing Tilt-down ballast housing for convenient lamp change CE compliant Electrical » ≫ 150W electronic ballast (yoke mounted) » ≫ Less than 14 Amps inrush current, lasts less than one AC cycle (16.7mS) » ≫ Select breakers that meet or exceed the in-rush and ampacity requirement » ≫ Less than 10% Harmonic distortion » ≫ Greater than 95% Power Factor » ≫ 90% Ballast Efficiency » ≫ 230V ± 10%, 50-60Hz » ≫ 0.74A operating current Optical » ≫ Optimised optical system for improved photometric » ≫ performance and field uniformity » ≫ Faceted borosilicate reflector with dichroic cold mirror coating removes greater than 90% infrared radiation (heat) and reflects greater than 95% of visible light » ≫ Reflector and lenses secured with anti-vibration shock mounts » ≫ Two bi-convex lenses with anti-reflective coatings » ≫ Low gate and beam temperature, shutters will not warp or distort Lamp » ≫ 150W Ceramic metal halide150W Philips MasterColor ® CDM lamp » ≫ 3000 K colour temperature » ≫ 12,000 hrs. lamp life » ≫ Optional 150W Philips MasterColor CDM 4,200K colour temperature (96 CRI) lamp available » ≫ IP65 » ≫ mass: 78,5x27,6x25,9cm » ≫ beam: 15° - 30° » ≫ weight: 16,3kg Konformitätserklärung source four