Results for
OKS SPEZIALSCHMIERSTOFFE GMBH
Germany
For mounting screwed connections, e.g. at combustion engines, threads on pipe fittings, flange joints and fittings of superheated steam lines, exhaust pipe and combustion chamber screwed connections, gas and oil burner mounting bolts To prevent burning together, seizing or rusting-on of screwed connections at water influence Suitable for brake systems of vehicles Advantages and benefits Excellently suited for preventing binding of threads exposed to high temperatures, corrosive environments and moisture Highly effective due to high level of pressure absorption Excellent corrosion protection Absolutely resistant to fresh water and sea water Extremely adhesive No classification according to (EG) No. 1272/2008 For best adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610/OKS 2611 universal cleaning agent. Use a brush, spatula or similar
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Assembling screw threaded connections subjected to high temperatures and corrosive influences Screwed connections at pipe fittings, flange joints and fittings in superheated steam lines Combustion chamber screwed connections and mounting bolts of gas and oil burners Screwed connections at combustion engines, exhaust systems, silencers and exhaust gas pipe connections Advantages and benefits Allows reliable non-destructive dismantling even after longer operating period under high operating and ambient temperatures Provides an optimal ratio of screw pretension and tightening torque Electrically conductive To achieve optimal adhesion clean the thread or the sliding surface first mechanically and then with OKS 2610/OKS 2611 universal cleaner to remove soiling as well as any lubricant residues. Use a brush, spatula or similar to apply a sufficient amount of paste to the head or nut contact surface and to the thread. Spray on evenly OKS 241 spray. The paste will also act as a sealant.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Assembling screw threaded connections subjected to high temperatures and corrosive influences Screwed connections at pipe fittings, flange joints and fittings in superheated steam lines Combustion chamber screwed connections and mounting bolts of gas and oil burners Screwed connections at combustion engines, exhaust systems, silencers and exhaust gas pipe connections Advantages and benefits Allows reliable non-destructive dismantling even after longer operating period under high operating and ambient temperatures Provides an optimal ratio of screw pretension and tightening torque Electrically conductive Also available as spray version OKS 241 To achieve optimal adhesion clean the thread or the sliding surface first mechanically and then with OKS 2610/OKS 2611 universal cleaner to remove soiling as well as any lubricant residues. Use a brush, spatula or similar to apply a sufficient amount of paste to the head or nut contact surface and to the thread.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Assembly lubrication of screw connections of high-strength steel subject to high temperatures, corrosive influences in chemically aggressive environments, e.g. on gas and steam turbines in power plants, combustion engines, threads on pipe fittings, flange joints and fittings in superheated steam lines, exhaust pipe and combustion chamber screwed connections etc. Parting lubrication of materials with a tendency to seize up, e.g. V2A, V4A and high-temperature steels Advantages and benefits Excellently suited for preventing seizing and binding Highly effective against corrosion affects Free of lead compounds, sulphides, chlorides and fluorides For best adhesion, clean the threads and sliding surfaces from dirt and other lubricants. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. Apply paste evenly in sufficient amount onto head/nut support and thread or onto the sliding areas with brush, spatula, etc.
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Non flamable High electric- and thermal isolation capability Dimensionally stabil Good mechanical structural strength Technical parameters pH 3 - 9 Temperature: t = -100 … +700 °C, short term up to 800 °C Main application Furnace, boiler and chimney doors Expansion joints Exhaust pipes Suitable for Power plant Furnace construction
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
PROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Universal fiber based high pressure gasket Characteristics A perfect selection of gasket material is based on operating conditions like pressure, temperature, media, surface pressure, Nonstick coating assures quick and scaling free disassembling Do not use any surface treatment! Technical parameters Temperature: t = -100 … +200 °C, short term up to 280 °C Pressure: p = 120 bar mainapplication Tube and pipe flanges Vessels Boilers Cylinders Joints Casings Lids Suitable for All Industries Approvals DVGW KTW BAM Form of delivery Sheets 1500 x 1500 mm in thickness of 0.5/0.8/1.0/1.5/2.0/3.0 mm or cut gaskets according to drawing or EN and international Standards Special dimensions and further gasket material styles from recognised manufacturers on request.
Request for a quoteHEXPOL TPE GMBH
Germany
Introduction Dryflex PS are a range of thermoplastic elastomer (TPE) compounds designed for seals and pipe joints used in waste water applications. What are TPEs? TPEs are a family of polymer compounds which display elastic and rubber-like properties at their service temperature. Like thermoplastics, when heated and with the application of shear force, TPEs become free-flowing and when cooled regain their original structure and stability. Unlike the chemical cross-linking which occurs in thermoset rubbers, TPE involves purely physical cross-linking, which can be reversed via the further application of heat, this makes it possible to re-use all production waste and end of life products can be easily reprocessed. Product Assurance We support our customers by proving the performance of our products via relevant testing and working with industry standards. The Dryflex PS grades meet the requirements of EN 681-2:2000, the European Standard EN 681-2, Type WT. This testing allows our cus
Request for a quoteResults for
Pipe joint - Import exportNumber of results
8 ProductsCountries
Company type
Category