Packing system - Import export

SPECIAL CONVEYING SYSTEMS CONVEYING OF PACKED AND BULK PRODUCTS IN THE PRODUCTION PROCESS WITH “METAL FREE AREA” FOR THE INTEGRATION OF METAL DETECTOR Budget sparing individualized solutions. Guaranteed long-term, trouble-free metal detection results. Continuous operation, reliable and with low maintenance. Systems available for nearly any application, from mill feeding over bag checking to the Transport of textile fibres.

flexible, simple, efficient minimum setup-time (< 30s ) = maximum flexibility wide range of bag sizes ( 50 x 50 mm - 400 x 800 mm) with many additional features external dosing-counting-weighing systems for small and big quantities

2 Component Fiber Sealing System impregnated with Graphite and MoS2 lubricant Pressure Capability is dependent on design of endrings. Characteristics Simple installation Use without barrier fluid Maintenance free Shaft protecting No adjusting of gland Re-pressurize in operation Operating range Velocity [v max]: 12 m/s Temperature: t = -40… +315 °C pH: 2 - 12 Density: 1.10 g/cm³ Pressure Capability is dependent on design of endrings. Main application Equipment which is badly accessible Worn shaft sleeves Non centric running shafts Suitable for Higher Temperature applications Accessories Special endrings made of HPU and PTFE/Graphite compound for non centric running shafts Form of delivery Unit for H- and P-Type: Cans 1 kg, hobbock of 25 Kg 2 Component System Component H: Is used for the basic manual fill of the stuffing box. Component P: Is used for Injection with press DVS TP 9000.

2 Component Fiber sealing system impregnated with PTFE and special lubricant Pressure Capability is dependent on design of endrings. Characteristics Simple installation Use without barrier fluid Maintenance free Shaft protecting No adjusting of gland Re-pressurize in operation Operating range Velocity [v max]: 8 m/s Temperature: t = -10… +180 °C pH: 2 - 12 Density: 1.10 g/cm³ Pressure Capability is dependent on design of endrings. Main application Equipment which is badly accessible Worn shaft sleeves Non centric running shafts Pulper Suitable for Universal use Accessories HPU Endrings Form of delivery Unit for H- and P-Type: Cans 1 kg, hobbock of 25 Kg 2 Component System Component H: Is used for the basic manual fill of the stuffing box. Component P: Is used for Injection with press DVS TP 9000.

Application specific ring sets Improved properties are: Extrusion resistance, if high pressures have to be sealed and/or bigger gaps than the normally recommended max of 25 of the packing size are found. Wiper function, if any micro scaling is found on the stem and at reciprocating movement with control valves Blow out safety, when sealing high compressed gases and fumes Pliability, with low gland forces as well good reset and adaptability for example in applications with temperature cycles. Ring Set 3335 For Control Valves up to 400 °C. Ring Set 6655 For Control Valves and staem applications up to 600 °C steam. All rings are delivered as standard in skive cut. Ring Set 6660 For Valves up to 650 °C steam. This ringset offers minimal volumeloss. The rings in the sealing zone are split as standard in 2 halves or as option delivered with a skive cut. Top and bottom ring are delivered with skive cut. Soot Blower Ring Set For soot blower applications with steam temperature up to...

Multilayer construction of expanded graphite with Inconel reinforcement Practical useful application data: max. temperature in oxidizing atmosphere: +450 °C Characteristics Universal suitable, rectangular preformed Sealing tape of expanded pure graphite with Inconel reinforcement Recommended gap width 0.5 mm, maximum gap width 1.0 mm Excellent adaptability on different housing forms and ovality Excellent transformation of axial compression into radial sealing force Operating range Temperature: t = -200… +650 °C pH: 0 - 14 Practical useful application data: max. temperature in oxidizing atmosphere: +450 °C Main application Fittings Valve pressure rings Suitable for Power plant Boiler houses Recommended minimum surface pressure at assembly 20 N/mm 2 Brettschneid Tape Form of delivery 5 x 12 mm in 1 kg Spool approx. 14 mtr 7.5 x 15 mm in 2.5 kg Spool approx. 18.5 mtr 10 x 15 mm in 2.5 kg Spool approx. 14 mtr 15 x 30 mm in 5 kg Spool approx. 9.5 mtr 19 x 30 mm in 5 kg Spool...

100 % PTFE Tape packing with cover braid and additional outside PTFE Tape Wrap Practical useful application data: max. temperature: +200 °C Characteristics Low coefficient of friction Good adaption to any kind of surface Non ageing or hardening Used as spiral guarantees simple assembly and disassembly in one piece Available in 2-15 mm Operating range Pressure [p max]: 20 bar, Velocity [v max]: 1 m/s Pressure [p max]: 20 bar, Velocity [v max]: 1 m/s Pressure [p max]: 100 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Valve Packing, easy to use Suitable for Chemical industry Universal use Installation and maintenance shops

PTFE Powder with Graphite, Extruded Profile Practical useful application data: max. temperature: +180 °C Characteristics Good pliability, prevents wear of shafts through embedding of abrasive materials The use of bullrings is required Operating range Pressure [p max]: 10 bar, Velocity [v max]: 12 m/s Pressure [p max]: 20 bar Temperature: t = -100… +250 °C pH: 0 - 14 Density: 1.90 g/cm³ Practical useful application data: max. temperature: +180 °C Main application Valves Gate valves Flanges Agitators Centrifugal pumps Lids Suitable for Cold and hot water Alkaline solutions Acids Oils Grease Bitumen Asphalt Crystalline and abrasive media Food industry Variant S 50 Propaflon White made out of pure PTFE

ePTFE-Graphite Fiber with special Para-Aramid corners Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Form stable, wear resistant, heat conductive packing, can be used as bullring Highest pressure resistance, practically no gap extrusion For high pressure plunger pumps up to 1,500 bar as die formed rings Highest pressure resistance Safe and universal packing for abrasive media Precompressed rings are recommended for applications in plunger pumps Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 1500 bar, Velocity [v max]: 2 m/s Pressure [p max]: 500 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.35 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Plunger pumps Gate valves Suitable for High pressure plunger pumps and similar applications Bull rings Form of delivery This packing can be...

Combination Braid Made of PTFE and Para-Aramid Fiber with Run-In Lubricant­ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar max. velocity centrifugal pumps: 15 m/s Characteristics Universal packing for abrasive media which need a reinforced, wear resistant and form stable packing Shaft protecting through good coefficient of fiction No contamination of media Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 500 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar max. velocity centrifugal pumps: 15 m/s Main application Centrifugal pumps Mixer Kneader Agitators Filter Extruder Refiner Suitable for Chemical industry Pulp and paper industry Form of delivery This packing can be manufactured from 6 to 40 mm square as well as in...

Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Very form stable, Recommended shaft surface hardness: HRC 50 Good heat conductivity therefore reduced wear Extrusion resistant at bigger gaps, can also be used as bullring Ability to withstand high pressure Safe and universal packing for abrasive products Die formed rings are recommended Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 500 bar, Velocity [v max]: 3 m/s Pressure [p max]: 250 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application In all units with larger gap widths, or in solids containing media. Plunger pumps Fittings Gate valves Suitable for Further development as Trapez-Pack ® 12. Production in trapezoidal form and with special impregnation. This optimizes performance characteristics...

100% PTFE - Fiber with special PTFE Dispersion and FDA conform Siliconoil impregnated Characteristics Highest chemical resistance for a packing in rotating equipment Pliable, easily compressible packing Self lubricating, dry running capability Shaft protecting surface hardness of HRC 25 is sufficient Non ageing Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar, Velocity [v max]: 1 m/s Pressure [p max]: 500 bar Temperature: t = -100… +280 °C pH: 0 - 14 Density: 1.70 g/cm³ Main application Agitators Mixer Refiner Filter Slow speed Centrifugal pumps Valves, Gate valves Metering valves Suitable for Pulp and paper industry Chemical industry Pharmaceutical industry Food industry Approvals FDA conformity EN 1935:2004 in accordance with EN 10/2011 Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 -...

PTFE Fiber with PTFE Blocking Agent and Silicone Free Run-In Lubricant Characteristics Highest chemical resistance for a packing in rotating equipment Pliable, easily compressible packing Self lubricating, dry running capability Shaft protecting surface hardness of HRC 25 is sufficient Non ageing Operating range Pressure [p max]: 15 bar, Velocity [v max]: 10 m/s Pressure [p max]: 100 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 100 bar Temperature: t = -50… +280 °C pH: 0 - 14 Density: 1.70 g/cm³ Main application Agitators Mixer Refiner Filter Slow speed Centrifugal pumps Valves, Gate valves Metering valves Suitable for Chemical industry General industry Variant S6SI with Food certification EG 1935:2004 in accordance with EU 10/2011 FDA conformity Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special measurements. 03 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special...

High strength ePTFE-Graphite Characteristics Extrusion resistant even with large clearances Form stable, wear resistant, heat conductive and can be used as bull ring Shaft protecting (recommended surface hardness: HRC 25) In high pressure applications die formed rings are recommended Operating range Pressure [p max]: 30 bar, Velocity [v max]: 8 m/s Pressure [p max]: 800 bar, Velocity [v max]: 3 m/s Pressure [p max]: 500 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.35 g/cm³ Main application High pressure plunger- and dosing pumps Bullrings for mixers, highpressure valves agitators, gate valves and valves Suitable for Chemical industry Petrochemical plants High pressure machine constructions Approvals BAM for liquid and gaseous oxygen 60 °C/15 bar, 40 °C/65 bar, 200 °C/50 bar Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special measurements. 03 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg...

Do you like efficiency? Find out more about our outstanding FEEDING SOLUTION – the FLEXFEEDER which is MANY STEPS AHEAD in terms of: > Range of formats, pick speed, pick rate > Operator-oriented guided setting & teaching for new products on one HMI > Easiest to operate compared to any other system > Up to 200 pcs./min with only one picker > Adaptable up-stream and down-stream to any existing and new machine types The highly efficient FlexFeeder robot can be applied for various industries, such as pharmaceutical, food or cosmetics. The robot feeding and/or packing system is configured for a wide range of components and shapes. It is perfect aligned for rigid and wavy trays but also for bulk packed components. Through the outstanding performance recognition a maximum throughput of up to 200 pcs/min with only one picker is assured. The outstanding FlexFeeder guarantees a faster, more precise and smoother product handling.