Results for
QUELLTECH GMBH
Germany
Many materials cannot be measured tactilely, therefore non-contact thickness measurements become necessary. Especially e.g. with glowing materials, or wet processes, a continuous tactile measurement is nearly impossible. Furthermore, web speeds in plant engineering and production have increased, requiring a corresponding fast sampling rate of the measuring systems. In addition, high measuring widths are often required. Why is contact free measurement technology so perfect for this application? Can be used in any web width, Scalable measurement thicknesses from a few millimetres to several meters, Thickness and coating thickness can be measured for different materials, Vibrations of the web materials, can be compensated, Turnkey solution for mechanical engineering, Non-contact and non-destructive measurement method, Large distances to the measured object are possible, Measurement of free forms,
Request for a quoteQUELLTECH GMBH
Germany
Four QuellTech Q6 3D- laser scanners are installed, mutually displaced by an angle of 90°. In this configuration, they are able to monitor the complete surface of the cable running through. It is important that the test does not lower the production speed, therefore very high sampling rates are required, supported by convenient data processing. The measured position of a defect is recorded in cable direction.
Request for a quoteMICRO-EPSILON
Germany
Use the optic calculator to determine which lens matches your desired application. Just select a lens, enter the distance from the camera to the object of measurement, and record the resulting object surface plane.
Request for a quoteMICRO-EPSILON
Germany
The optoCONTROL 2700 is a compact LED micrometer for the precise measurement of diameter, gap, edge and segment. The micrometer is characterized by its high accuracy with a measuring range of 40 mm. As the controller is integrated in the receiver, the cabling and installation work is reduced to a minimum. Thanks to the active inclination correction, objects tilted by up to 45° are also detected extremely precisely. The configuration is performed conveniently via the web interface and enables the parameters set up of video signal, filter and different measuring modes. In set-up mode, a shadow image can be used for simple alignment of the measuring object. The excellent price-performance ratio rounds off the service package.
Request for a quoteMICRO-EPSILON
Germany
The optoCONTROL 1200 is based on the principle of light quantity measurement. The compact laser micrometer has all the evaluation electronics integrated in the case and the mounting is very flexible. High dynamic applications can be measured due to the measuring rate of 100 kHz.
Request for a quoteMICRO-EPSILON
Germany
Optical micrometers from Micro-Epsilon operate according to the transmitted light principle (ThruBeam micrometer). Here, the transmitter produces a parallel light curtain that is transmitted via a lens arrangement into the receiver unit. The beam is interrupted if an object is in the light path. The resulting shadowing is detected by the receiving optics and output as measurement value. Most optical micrometers are used for dimensional measurements in production, machine monitoring and quality assurance. Parameters such as diameter, gap, height and position are detected with high accuracy.
Request for a quoteMICRO-EPSILON
Germany
Operating the optoCONTROL CLS1000 controllers requires sensors that are used on the measuring point. Depending on the measurement task, the sensors can be individually combined. The high-quality sensors with fiber optics are characterized by small installation dimensions and robust materials. This makes them particularly suitable for mechanical stress and harsh ambient conditions such as high temperatures. The sensor can also be used in restricted areas as the sensor head requires a minimum of installation space.
Request for a quoteMICRO-EPSILON
Germany
The CLS1000 controller is available in five different versions: CLS1000-QN with antivalence function (normally open/normally closed), CLS1000-2Q with two switching outputs, CLS1000-OC with optocoupler, CLS1000-AU with voltage output and CLS1000-AI with current output. Each model is available in NPN, PNP or push-pull versions. All controllers are available with or without triggers.
Request for a quoteMICRO-EPSILON
Germany
The optoCONTROL CLS1000 optoelectronic fiber optic sensor is suitable for use in automation thanks to its variable switching outputs. The CLS1000 is used for reliable position monitoring as well as for position and presence detection. The fiber optic sensor comprises a CFS sensor and a CLS1000 controller. The wide detection and operating ranges of up to 2000 mm make the fiber optic sensor ideal for the detection of components even at great distances. Due to the small design of the CFS sensors, the CLS1000 optoelectronic fiber optic sensor series is particularly suitable for use in confined installation spaces.
Request for a quoteMICRO-EPSILON
Germany
The optoCONTROL 2520 is a compact laser micrometer with integrated controller. A high resolution, model variant with measuring ranges of 46 mm and 95 mm as well as variable mounting distances allow a wide range of applications in quality monitoring and production control. The measurement object can be placed at any position within the light curtain and the distance from transmitter to receiver can be freely selected.
Request for a quoteMAHLO GMBH & CO. KG
Germany
Weft straightening the way it should be ... The Orthopac RVMC is the universally employable straightening system from Mahlo for the correction of web distortions for nearly all applications. Available with hydraulic or electrical straightening roller adjustment. The modular construction allows the system to be configured to meet the demands of changing conditions and requirements.
Request for a quoteSÜD-OPTIK SCHIRMER GMBH
Germany
Convex lenses, optical lenses, glass lenses
Request for a quoteSÜD-OPTIK SCHIRMER GMBH
Germany
Micro optics, optical lenses, glass lenses, molded glass, moulded glass
Request for a quoteSÜD-OPTIK SCHIRMER GMBH
Germany
optical lenses, prism cones, level measurement
Request for a quoteSÜD-OPTIK SCHIRMER GMBH
Germany
Convex lenses, optical lenses, glass lenses
Request for a quoteSÜD-OPTIK SCHIRMER GMBH
Germany
Concave lenses, optical lenses, glass lenses
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TOPTICA PHOTONICS AG
Germany
TOPTICA’s product line of Faraday Optical Isolators are specially designed and manufactured in-house by the laser experts of TOPTICA to give industry leading performance in dual stage configurations. Dual stage models provide at least 60dB isolation and 80% transmission (> 67 dB and > 90% average) over individual wavelength ranges in total spanning 640 - 1100nm.
Request for a quoteTOPTICA PHOTONICS AG
Germany
TOPTICA’s product line of Faraday Optical Isolators are specially designed and manufactured in-house by the laser experts of TOPTICA to give industry leading performance in single stage configurations. Single stage devices provide at least 35 dB isolation and 85% transmission (> 43 dB and > 92% average) over individual wavelength ranges in total spanning 392.5 - 427.5 nm and 630-1400 nm.
Request for a quoteTOPTICA PHOTONICS AG
Germany
TOPTICA Photonics AG offers a wide range of optical fibers ideally suited for use with TOPTICAs lasers and FiberDock. These economically priced fibers cover a wide range of wavelengths. TOPTICA recommends to always purchase a fiber along with a laser and fiber coupler, as this ensures maximum fiber coupling efficiency.
Request for a quoteINVER GMBH
Germany
Quality assurance through internal quality control , the quality characteristics like Light transmittance clarity Minimum thickness of the individual plates / packages are ensured.
Request for a quoteINVER GMBH
Germany
Diameter : any Thickness: Single disc 0.20 mm , packages 0.40 to 1.00 mm Quality: Ruby standard " A " (Quality V5) other quality on request
Request for a quoteINVER GMBH
Germany
Length: 100-500 mm Width: 24 mm Thickness: 0.80 to 1.70 mm Quality: Ruby stained " A " and Ruby stained " B " (Quality V5 and V6) other quality on request Ends : round
Request for a quoteINVER GMBH
Germany
Length: from 100 to 500 mm Width: 24 mm Thickness: 0.175 to 0.20 mm , packages as desired Quality: Rubin stained " A " (Quality V5), other quality on request Ends : square
Request for a quoteINVER GMBH
Germany
Length : any Width : any Thickness : any Quality: as required, including " green " Ends : any
Request for a quoteINVER GMBH
Germany
Length: 100-500 mm Width: 34 mm Thickness: 0.165 to 0.20 mm , or 0.20 to 0.30 mm Quality: Ruby staind " A " and Ruby staind " B " (Quality V5 and V6) other quality on request Ends : round
Request for a quoteResults for
Optic it - Import exportNumber of results
27 ProductsCompany type