Mounting flange - Import export

Immersion heater ATEX II 2 G/D EEx d IIC T1 – T6 The Exheat „RFA-C” range of flameproof removable core heaters offers a hazardous area heating solution for oil and similar applications where low heat density is required. The element can be withdrawn for inspection without system drain down. The standard heater consists of a single element core fitted into a mounting flange. A robust EEx d terminal enclosure protects the electrical connections. The watts density of the element core fitted depends upon the media to be heated and the kilowatt rating required.

Core Immersion heater ATEX II 2 G/D EEx d IIC T1 – T6 ATEX IECEx zertifiziert The EXHEAT® ‘FP-C’ Range of flameproof core immersion heaters offers a Hazardous Area heating solution for oil and similar applications where a low heat density is required. The special element/sheath arrangement allows the element cores to be withdrawn for inspection without system drain down. The standard heater consists of a number of element cores fitted into a mounting flange. A robust flameproof terminal enclosure protects the electrical connections. The number of element cores fitted depends upon the media to be heated and the kilowatt rating required.

Flameproof immersion heaters ATEX II 2 G/D EEx d IIC IECEx Exd IIC T1 – T6 Ex tD A21 IP66 T…°C The EXHEAT “FP-C” range of flameproof core immersion heaters offers a hazardous area heating solution for oil and similar applications where a low heat density is required. The special element / sheath arrangement allows the element cores to be withdrawn for inspection without system drain down. The standard heater consists of a number of element cores fitted into a mounting flange. A robust EEx d terminal cover protects the electrical connections. The number of elements fitted depends upon the media to be heated and the kilowatt rating required. Dependent on application, the heater can be provided with temperature control by contactor or thyristor.

BEDIA intelligent tank sensor ITS 65 is used to monitor the filling levels of oils of any kind. The sensor is able to automatically recognize and what kind of oil (hydaulic oil, engine oil etc.) is present and calibrates itself to it. The capacitative measurement principle permits measurement of levels without mechanically moving parts. This considerably increases stability and operating safety. Mechanics The new tank sensor ITS 65 is characterized by a particularly stable, but light mechanical system specially designed for “Heavy Duty Applications”. The mounting flange and measurement tube are constructed from die cast aluminium. This construction permits the insertion of tank sensors up to 1200 mm in length, without additional support on the tank floor. Analogue Output The analogue output is available as an voltage output with a range from 0 V to 10 V or as an PWM output.

BEDIA intelligent tank sensor ITS 60 is used to monitor the filling levels of Diesel fuels. The sensor is able to automatically recognize what kind of Diesel fuel (Bio-Diesel, Summer-/Winter-Diesel etc.) is present and calibrates itself to it. The capacitative measurement principle permits measurement of levels without mechanically moving parts. This considerably increases stability and operating safety. Mechanics The new tank sensor ITS 60 is characterized by a particularly stable, but light mechanical system specially designed for “Heavy Duty Applications”. The mounting flange and measurement tube are constructed from die cast aluminium. This construction permits the insertion of tank sensors up to 1200 mm in length, without additional support on the tank floor. The flange hole distribution is compatible with commercially used tank sensors. This means that this system can be used without expensive conversions.

The separable stainless steel probe LMK 358H has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure range 0 ... 60 cmH2O up to 0 ... 100 mH2O — accuracy: 0.1 % — diameter 39.5 mm — cable and sensor section separable — HART®-communication (setting of offset. span and damping) — permissible temperatures up to 85 °C — high long term stability Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — cable protection via corrugated pipe — diaphragm (AI2O3 99.9 %) — accessories e.g. mounting flange with cable gland and terminal clamp

The stainless steel probe LMK 382 has been designed for continous level measurement in waste water, waste and higher viscosity media. Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels easily. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 200 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 39.5 mm — especially for sewage, viscous and pasty media Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — mounting with stainless steel pipe — flange version — diaphragm pure ceramic (99.9 % AI2O3) — different kinds of cables — different kinds of elastomers

monitor suspension arm incl. cable management cover for mounting of heavy monitors with 6 - 12 kg, 360° mounting flange can be attached lateral or transverse to the profile mounting plate VESA MIS-D 75/100 compatible, adjustable viewing angle and height; accessories included: mounting flange incl. bolt and cover cap Nutfixierungsplatten screws & nuts centering plates, anti-loss washers, anti-loss washers

Monitor Work Station SIT / STAND 4-axis, Profile Attachment 40 (Set) For mounting of monitors with 2 - 8 kg, mounting plate VESA MIS-D 75/100 compatible, adjustable viewing angle and height; fold-up holder with wrist rest for keyboard up to 2.5 kg, incl. left or right pull-out shelf for mouse, as well as holders for hand scanner and mouse; 360° mounting flange can be attached lateral, transverse, or on the face of the profile, if attached on the front face, the core hole of the respective profile must be M8 threaded Material Monitor Work Station: Steel / aluminum / plastic #b Cable management cover: Plastic #b Mounting flange: Aluminum die-cast #b Screws: Steel Surface/Color: Monitor Work Station: Gray Lacquered Cable management cover: Gray Lacquered Mounting flange: Alu color Zinc plated

The compact displacement sensors of series RC13 are used in applications with harsh environmental conditions, which require a robust linear transducer with long lifetime, high accuracy and a guided push rod with measuring lengths from 25 to 250 mm. The compact linear potentiometers of the series RC13 are designed for applications with harsh environmental conditions. For mechanical coupling, the displacement sensors are available in three mounting versions: mounting brackets, ball joints or flange. The variant with ball joints compensates movements transversely to the push rod, so that non-linear movements can also be coupled simply and without stress. The mechanical detection of linear movement is done by a front guided push rod.

The MCP30 potentiometers with precision ball bearings and servo flange are suitable for applications where a very long life with high linearity and precisely mountable sensor is important. The precision potentiometers of the MCP30 series are designed for high demands on accuracy and reliability. They have good linearity and excellent life expectancy. The potentiometer is equipped with a servo flange for precise mounting. In closed loop controlled systems, the conductive plastic potentiometers can be used particularly advantageously. As passive components, they do not cause any dead times due to signal propagation and the signal is infinitely available. Very long life Very precise sensor Servo flange for precise mounting 2 Precision ball bearings Robust metal housing

The MCP40 potentiometers with precision ball bearings and servo flange are suitable for applications where a very long life with very high linearity and precisely mountable sensor is important. The precision potentiometers of the MCP40 series are designed for high demands on accuracy and reliability. They have outstanding linearity and excellent life expectancy. The sensor is available in a high-resistance version for power-saving requirements. The potentiometer is equipped with a servo flange for precise mounting. In closed loop controlled systems, the conductive plastic potentiometers can be used particularly advantageously. As passive components, they do not cause any dead times due to immediate signal availability, and the signal is continuous without steps available. Very long life Very precise sensor Servo flange for precise mounting 2 Precision ball bearings Robust metal housing Power saving in applications

The hollow shaft potentiometers of the MHP16 series are predestined for applications with limited installation space. They can be mounted precisely and easily on narrow shafts thanks to the flattened hollow shaft. The reliable and stable output signal is guaranteed thanks to the high-quality resistive element and multi-finger precious metal wiper. Extremely compact housing design (ø16.4 x 6 mm) Stable output signal thanks to high-quality conductive plastic resistance element and multi-finger wiper (precious metal) Flattened hollow shaft and flange allow easy mounting

The displacement sensors of series RC20 are used in applications with harsh environmental conditions, which require a robust linear transducer with long life span, high accuracy and guided push rod with measuring lengths from 10 to 300 mm. The linear potentiometers of the series RC20 are designed for applications with harsh environmental conditions. For mechanical coupling, the displacement sensors are available in three mounting versions: mounting brackets, ball joints or flange. The variant with ball joints compensates movements transversely to the push rod, so that non-linear movements can also be coupled simply and without stress. The mechanical detection of linear movement is done by a front guided push rod

Available in both cast iron and stainless steel construction, the 2AV2 family provides up the 600 m³/hr (360 CFM) in a compact design, while giving you the flexibility of choosing the right motor for your needs. The pedestal design of the 2AV2 provides the benefit of flange mounting the motor to a self-supporting pump. No coupling guards, base plates or cumbersome shaft alignment is needed. The 2AV2 is an ideal choice when you need a compact and economical pump for an explosion proof or severe duty application. We focused on durability and dependability when we developed these liquid-ring pumps. With a reinforced stainless steel shaft and sealed bearings, the 2AV2 can provide up to 20,000 hours of maintenance-free operation. The 2AV2 is expertly designed and manufactured to be quiet and vibration free. With sound pressure levels of less that 75 dBA, it complies with the strictest noise standards, eliminating the need for additional sound attenuating devices. Advantages at a glance Compact Rugged design for reliable operation and long service life Precision-balanced rotor Suitable for NEMA C flange motor frames Low installation costs Easy to service Standard mechanical seal Main Applications Plastics Industry Chemical Industry Medical Technology Food and Beverage Industry General Industry