Measurement data - Import export

Four QuellTech Q6 3D- laser scanners are installed, mutually displaced by an angle of 90°. In this configuration, they are able to monitor the complete surface of the cable running through. It is important that the test does not lower the production speed, therefore very high sampling rates are required, supported by convenient data processing. The measured position of a defect is recorded in cable direction.

Data logging & analysis The mLog software is a data logging application for Mahlo equipment. The desktop application runs on an office PC and provides comfortable creation and archiving of PDF protocols of running measurements. The recording of the measurement data is controlled on the Mahlo device PC, the finished protocols are transferred to mLog. An advanced search function with filter categories makes finding logs easy and fast. In the protocol viewer the protocol can then be displayed, printed, saved or sent by e-mail.

The IF1032/ETH interface module now enables to run sensors with analogue interfaces with the proven web interface. With the Ethernet interface, measured data can be easily displayed on a PC. Moreover, sensors can be connected to an EtherCAT bus. The RS485 interface allows connection of new sensors using the Micro-Epsilon specific RS485 protocol.

The new capacitive sensor system capaNCDT 6228 is designed for measurement tasks with ambient temperatures up to +800 °C. Up to four high-temperature sensors of the CSE/HT series can be connected simultaneously to the powerful controller. The integrated high-temperature sensor cable compensates for interference from electric or magnetic fields. Furthermore, the measured data is output both analog and digital via modern interfaces such as Ethernet and EtherCAT.

3DInspect is a uniform and user-friendly software tool for all 3D sensors from Micro-Epsilon. Parameter setting of the 3D sensors and recording of the measurement data are done directly in the 3DInspect software. Powerful tools allow point cloud alignment and filtering, intuitive detection and selection of relevant areas, and program combination. The 3D point clouds can be processed as required and measured values can be output to the controller.

The dimensionCONTROL TMWI 8302.LC system is suitable for the inline weight inspection of continuous running rubber profiles (tread pattern or sidewalls) for passenger and truck tires. Based on the force measurement principle, the inspection system uses two load cells which measure the deflection of the measurement conveyor. These sensor elements are attached to a massive construction, which ensures a long-term mechanical stability of the system. The measurement conveyor uses precise and balanced aluminum rollers with special surface treatment. This ensures a low deadweight, avoids influence of unbalance and eliminates material sticking. Data obtained from the load cells are processed in the implemented PLC cards which determine the measured weight mathematically.The software included offers a variety of measurement data processing, definition of design profiles, statistical analysis of measured profiles and diagnostic tools.

With an extended measuring range up to 45mm, the new eddy current sensor series completes the product portfolio of eddylab GmbH and at the same time combines all advantages of a non-contact eddy current measuring principle: With wear-free distance and displacement measurement, eddy current sensors are characterized by highest precision and dynamics. The new T14/T20/T40 series can withstand extreme temperatures in a range of -40...+150 °C without any problems and is insensitive to external influences such as dirt and dust. The new sensors with measuring ranges between 14 mm and 45 mm are also extremely compact and robust. This makes them ideal for use in difficult industrial environments or vibration measurements with larger amplitudes. Together with the TX electronics from eddylab GmbH and the eddy current software eddyMOTION, measurement data can be analyzed, visualized, and documented.

The high-performance surfaceCONTROL 3D 3200 snapshot sensor is ideally suited for use in industrial applications. It performs automated inline 3D measurements for geometry, shape and surface inspection on diffuse reflecting surfaces. The sensor is characterized by its compact design and high measurement accuracy combined with high data processing speed. With a high Z-axis repeatability of up to 0.6 µm, the sensor is ideal for precise 3D measurement and inspection tasks. Two different measuring ranges cover different measuring fields.

Light-transmission gauge for precise measurement and fast data logger application. Features: Precise because of spectral monitor and luminance detector. Fast data-logger measurements with photodiode. Simulated A, C and D65. LAN, USB, RS232 Interfaces.

High-quality device for measurement of CW-, single pulse and modulated radiation. Features: Optometer for all detector heads with calibration data plug. Measurement modes: CW, pulse energy, dose, peak-to-peak, effective luminous intensity (Blondel-Rey), data logger, battery, main power, RS232

Predictive maintenance needs measured data to the greatest possible precision. On components with moving or rotating parts, the relevant measuring points (e. g. temperature of an electric motor’s rotor or planetary gearbox bearing) sometimes cannot be accessed with wired sensors. Accordingly, the data needed for condition monitoring can be obtained only with complex calculations and estimates. However, precise and reliable measured data are obtained only when a sensor is placed directly on the moving part. For requirements of this kind we have developed NORIFID, a simple, cost effective measuring system that is based on established technologies, supplies wirelessly power by induction to a sensor on a moving part, and transmits the measured data via RFID to a fixed receiver.

The N3500 (NORIMOS 3500) is our cost-efficient alarm, monitoring and control system for engines and auxiliary systems. The system is based on two central, redundant PC master stations. They collect and monitor the measurement data from the connected I/O modules. With up to 9,000 I/Os, a matching alarm extension system for accommodation and a monitoring display for the bridge, the system can be easily extended and adapted to any application. The N3500 is based on robust components and can be used flexibly: from simple data acquisition systems up to complex alarm and monitoring systems with integrated control functions for pumps, valves and fans. The system is approved by all conventional shipbuilding classification societies (ABS, BV, CCS, DNV-GL) and thus, is the ideal companion for all aspects of the monitoring and control of shipboard propulsion systems.

VIBGUARD IIoT offers a choice of 12, 16 or 20 measuring channels which are sampled in parallel and synchronously. This allows even the most complex equipment to be continuously monitored and protected against unplanned shutdowns. VIBGUARD IIoT works autonomously and performs the measurement tasks automatically. The measurement data such as time signal, characteristic value, FFT spectrum, kinetic wave path (orbits), or torque are processed in parallel and almost in real time and can be correlated with the running production process. The fast data processing makes VIBGUARD IIoT the perfect monitoring and diagnostic system for systems with short operating cycles, such as cranes, machine tools, presses, or for machines with highly dynamic processes, such as test benches, wind turbines or chain conveyors. All critical fans and pumps can also be monitored easily but effectively with VIBGUARD IIoT.

A unique handheld measuring device with which even untrained personnel can easily and effectively measure machine vibration on rotating machinery. Thanks to its forwardlooking measuring principle and data acquisition across three axes with the triaxial sensor, all relevant condition information is recorded with the touch of a single button. And at a measurement speed that opens up fully new dimensions. Not only is the VIBSCANNER 2 a breakthrough in terms of measurement speed and precision, but also through its robustness and its intuitive operating concept. The intuitive graphical user interface assists the employee en route in taking repeatable errorfree measurements. The device provides him/her with the exact information about the status of the measurement locations and the progress of the route.

Safe, simple, precise The new VibScanner 2 Ex is a nextgeneration, explosion protection system for quickly detecting machine vibration in hazardous work environments. Measuring simultaneously on three axes, the VibScanner 2 Ex sets the benchmark for fast and accurate measurements of machine, gear, and bearing issues. This is the ultimate tool for fast and accurate machine vibration measurements. The VibScanner 2 Ex heightens efficiency and data quality. In just a quarter of the time of a standard datacollector, it precisely measures available data in three axes. Equipped with a triaxial sensor, it requires only one measurement point and the click of a button to begin collecting machine data. This device is ideal for routebased maintenance jobs in environments where explosion protection standards are required. Its rugged magnetic foot of the triaxial sensor fits perfectly on the housing of any motor, pump, fan, or other rotating device, detecting vibration right near the source.

The EPC Spot is our measuring device for a random check of the gas levels of O2/CO2 in packaging or packaging machines. A sample is taken by a special needle. Due to the small amount of gas the analyser needs for the measurement, blister packs or ampoules can also be tested. As a user, you can enter several limit values for different products in the device. The result is then additionally visualised in red or green. All measurements are stored in the device and can be further processed in various ways. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages

The EPC VM is our measuring device for monitoring O2/CO2 in packaging machines. In addition to continuous measurement of the gas atmosphere, spot measurement of individual packages is also possible. The functionality is the same as with our Zr-Ox EPC spot analyser. Once set, the analyser can also control the gassing of the machine. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages - Various RS232 protocols that can be changed in the unit for communication with different soldering, packaging soldering, packaging machines, analysers or other equipment and processes - Operation for user and administrator in different levels

Our EPC 3GAS analyser is a more flexible variation of the basic model. The device changes the measurement automatically or externally controlled in order to monitor several processes simultaneously or consecutively. The change of the currently active measurement from process 1. to process 2. is done either by an external signal or in an adjustable time interval. Since our sensors can determine the oxygen concentration very quickly, time intervals of 30 seconds are realistically achievable. With desired concentrations of approx. 500 ppm, this is completely sufficient. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages

The Zr-Ox EPC is our standard model for continuous monitoring of residual oxygen. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages - Various RS232 protocols that can be changed in the unit for communication with different soldering, packaging soldering, packaging machines, analysers or other equipment and processes - Operation for user and administrator in different levels - Standardised 0/2-5/10 VDC or 00/04-20 mA analogue signal adjustable - 3 backups for storing different unit functions and settings - Display of all alarms and errors