Washers - Import export

SPIROL offers Disc Springs pre-stacked in custom configurations (greased or ungreased) packaged in shrink wrap with a perforated tab for ease of insertion into the assembly. The Pre-Stacked Disc Springs are delivered intact which saves time, mistake-proofs the assembly process, and eliminates the mess associated with greasing the stack. Have an existing Pre-Stacked Disc Springs Application? If you have an existing Disc Spring Stack that you would like quoted, please Request a Quote. We are here to help!

SPIROL specializes in the custom manufacturing of tightly toleranced Precision Shims, Specialty Washers and Thin Spacers. SPIROL produces Shims custom-made to customer specifications in thicknesses ranging from 0.02mm up to 9.5mm (.001" up to .375") using a variety of stamping methods, machining processes and laser technology to meet your specific lead time and total cost considerations. Whether a project is for prototype, short run or long-term requirements, SPIROL has a solution to minimize costs by controlling - or even eliminating - tooling costs. In addition to having flexibility in our primary operations, SPIROL also performs most secondary processes in-house including heat treating, grinding, lapping, high speed polishing deburring, finishing and passivation.

Disc Springs are conically-shaped precision components designed to be axially loaded. Disc Springs are often incorrectly referred to as belleville disc springs, belleville springs, belleville washers or simply conical washers. SPIROL offers the full range of DIN EN 16983 (formerly DIN 2093) Group 1 and 2 Disc Springs in Series A, B, and C. In addition to the DIN specified sizes, SPIROL stocks its own standard sizes with outside diameters ranging from Ø8mm to Ø200mm. SPIROL Standard Disc Springs were designed around the standardized calculations of DIN EN 16984 (formerly DIN 2092), and meet all material, dimensional tolerance, and quality specifications as laid out in DIN EN 16983 (formerly DIN 2093) yet offer an expansion in the diameter and thickness combinations that are not included in the DIN standard. Standard materials include carbon steel and alloy steel, both finished with a protective coating of zinc phosphate and oil.

Flat washers ~DIN 125 (~DIN EN ISO 7089) Material: PVDF Colour: natural

Provide a larger bearing surface for Snip&Snap rivets (bore diameter 5.5 mm). Different colour combinations possible. Also suitable for pivot points. Material: PA 6 Colours: last digits 000 = natural last digits 002 = grey ~RAL 7000 last digits 087 = blue ~RAL5017 last digits 114 = black ~RAL 9005 last digits 124 = red ~RAL3020 last digits 132 = yellow ~RAL1023

Short version! Protect against dirt and corrosion and are resistant to all weather influences and a lot of chemicals. Applicable with washer. Material: PE Colours: last digits 500 = white without last digits = black

Long version! Protect against dirt and corrosion and are resistant to all weather influences and a lot of chemicals. Applicable with washer. Material: PE Colours: last digits 500 = white without last digits = black

Flat washers ~DIN 125 (~DIN EN ISO 7089) form A Material: zinc-plated steel (final digits 52) stainless steel (final digits 53)

Flat washers ~DIN 9021 (~DIN 34816) Material: PA Colour: natural

Flat washers ~DIN 433 (~DIN EN ISO 7092) Material: PA Colour: natural

Flat washers ~DIN 125 (~DIN EN ISO 7089) Material: PP Colour: natural

Flat washers ~DIN 125 (~DIN EN ISO 7089) Material: PA Colour: natural

Suitable for all rotating and moving parts. Ideal for silent hinges and low-speed machines. Electrical insulation between shaft and bearing housing. Material: PA 6.6 Colour: natural Due to its gliding properties and high wear resistance, polyamide is also very applicable during dry running. Resistant to fouling, atmospheric influences and to the majority of chemicals. After assembly the bearing clearance is approx. 1% of the shaft diameter. Further types or materials on written request.

Suitable for all rotating and moving parts. Ideal for silent hinges and low-speed machines. Electrical insulation between shaft and bearing housing. Material: PA 6.6 Colour: natural Item with last digits 599 = dyed black by emico Due to its gliding properties and high wear resistance, polyamide is also very applicable during dry running. Resistant to fouling, atmospheric influences and to the majority of chemicals. After assembly the bearing clearance is approx. 1% of the shaft diameter. Further types or materials on written request.

For the protection of surfaces like enamel, paint, textile, glass, ceramic etc. Also suitable for decoration purposes. Material: PA 6 Colour: black

For the protection of surfaces like enamel, paint, textile, glass, ceramic etc. Also suitable for decoration purposes. Material: PA 6 Colour: Last digits 599 = black Last digits 500 = white

For the protection of surfaces like enamel, paint, textile, glass, ceramic etc. Also suitable for decoration purposes. Material: PA 6 Colour: Last digits 599 = black Last digits 500 = white

For the protection of surfaces like enamel, paint, textile, glass, ceramic etc. Also suitable for decoration purposes. Material: PA 6 Colour: Last digits 599 = black Last digits 500 = white

For the protection of surfaces like enamel, paint, textile, glass, ceramic etc. Also suitable for decoration purposes. Material: PA 6 Colour: Last digits 599 = black Last digits 500 = white

For the protection of surfaces like enamel, paint, textile, glass, ceramic etc. Also suitable for decoration purposes. Material: PA 6 Colour: Last digits 599 = black Last digits 500 = white

These insulating cases combine electrical insulation with high mechanical strength. As they are resistant to electrolytic corrosion, they are essential for connections between incompatible metals. Material: PA-glass fibre reinforced Colour: black Colour white on written request.

Protection of transformers, installations, lighting fixtures etc. Material: PA 6 Colour: natural Further types on written request.

Prevent electrolytic corrosion of screws with counter-sunk heads. Frequently applied in the lighting and electrotechnical industry. Compulsory by law in many countries. Furthermore a good protection for countersunk screws. Absorb vibrations. Material: PA 6 Colour: natural Further types on written request.

Self-lubricating polyamide, ideal for pivotal points. Material: PA 6 Colour: without last digits = natural last digits 599 = black

Washers with flange Wall thickness: 8.13 mm Material: LDPE Colour: yellow

Our corrugated tubes or hoses for windshield and headlamp washer systems can be supplied with one or two mounted Quick connectors as fully assembled units. The Quick connector is a reliable way to connect a corrugated tube to the connecting cuff and allows for quick and easy assembly or disassembly. Our product line includes a wide range of accessories and diameters. Application: Automotive, agricultural machinery and construction engines; for applications in headlight cleaning systems