Protective caps - Import export

Protective caps for polygonal taper shank tool holders according to ISO 26623-1 Delicate polygonal taper shank tool holders are protected against dirt and damage during transportation and storage Incorporated latches prevent unintentional release from the shank Impact and crack resistant Polyethylene

Flexible, light and suitable protection for multiple tool diameters Suitable for tools from Ø 3 mm up to Ø 30 mm The single sizes are suitable for multiple tool diameters Flexible material for easy assembly and removal

fine mist sprayer pump for finest nebulisation, with transparent protective cap

fine mist sprayer pump for finest nebulisation and large output, with transparent protective cap

Short version! Protect against dirt and corrosion and are resistant to all weather influences and a lot of chemicals. Applicable with washer. Material: PE Colours: last digits 500 = white without last digits = black

Short version! Protect against dirt and corrosion and are resistant to all weather influences and a lot of chemicals. Applicable without washer. Material: PE Colours: last digits 500 = white without last digits = black Also available in grey RAL 7004 - please send us your enquiry!

Long version! Protect against dirt and corrosion and are resistant to all weather influences and a lot of chemicals. Applicable with washer. Material: PE Colours: last digits 500 = white without last digits = black

Long version! Protect against dirt and corrosion and are resistant to all weather influences and a lot of chemicals. Applicable without washer. Material: PE Colours: last digits 500 = white without last digits = black

Covering caps for SIT and torx screws. Protect against dirt, damage and unintentional release. Available for countersunk and fillister head screws. Material: LDPE Colours: last digits 500 = white ~RAL 9010 last digits 599 = black ~RAL 9005 last digits 002 = silver-grey ~RAL 7001 Special colours according to RAL possible from 5,000 pcs - please send us your enquiry!

Ideal for booth construction and toolbuilding as well as for the furniture industry. P = Pozidriv Material: PE Colours: last digits 600 = white last digits 699 = black

Protection against dirt and corrosion. Material: PE Colours: without last digits = black last digit W = white last digits GR = grey Further types on written request.

Cap with integrated washer that shortens the mounting time considerably and delivers an aesthetic end product. Applicable for M3, M4 and M5 screws. One dimension for several screw sizes! Material: PP Colours: without last digits = white last digits 699 = black V = for countersunk screws / M = for metric screws

Material: PE Colours: last digits 600 = white last digits 699 = black

Washers for snap-on caps. These rings are applicable for cap type: 66 Material: PA Colours: natural Ring type 67 suitable for DIN 84, 85, 96, 439, 6912, 7971, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4035. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap type: 66 Material: PA Colours: natural Ring type 66 suitable for DIN 84, 85, 96, 439, 6912, 7971, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4035. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap types: 61, 62, 64 and 65. Material: PA Colours: natural Ring type 65 suitable for DIN 84, 85, 96, 439, 555, 558, 571, 601, 912, 931, 934, 979, 6912, 7971, 7976, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4014, 4016, 4018, 4032, 4034, 4035, 7049. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap types: 61, 62, 64 and 65. Material: PA Colours: natural Ring type 63 suitable for DIN 95, 97, 963, 964, 965, 966, 7963, 7972, 7982, 7983, 7991, 7995, 7997 ISO 1482, 2009, 2010, 7046, 7047, 7050, 7051, 10642. Dimension A has to match the dimension A of the snap-on caps.

Caps suitable for hole size 12.0 mm Material: PA Colours: last digits 013 = grey ~RAL7004 last digits 015 = grey ~RAL7035 last digits 021 = white ~RAL9001 last digits 599 = black ~RAL9006 without last digits = white ~RAL9003 Cap type 68 suitable for DIN 84, 85, 96, 439, 6912, 7971, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4035

Caps for snap-on rings. These caps are applicable for ring types: 66, 67 and 69. Material: HDPE Colours: last digits 076 = brown ~RAL8019 last digits 027 = brown ~RAL8014 last digits 021 = beige ~RAL9001 last digits 020 = grey ~RAL7038 last digits 018 = grey ~RAL7044 last digits 015 = grey ~RAL7035 last digits 014 = grey ~RAL7001 last digits 013 = grey ~RAL7004 last digits 012 = white ~RAL9016 last digits 011 = white ~RAL9003 without last digits = black ~RAL9005 Cap type 66 suitable for DIN 84, 85, 95, 96, 97, 439, 963, 964, 965, 6912, 7963, 7971, 7972, 7981, 7982, 7983, 7984, 7991, 7995, 7996 ISO 1207, 1481, 1482, 1580, 2009, 2010, 4035, 7046, 7047, 7050, 7051, 10642 Dimension A has to match the dimension A of the snap-on rings.

Caps for snap-on rings. These caps are applicable for ring types: 60, 61, 63 and 65. Material: HDPE Colours: last digits 011 = white last digits 114 = black last digits 013 = grey ~RAL7004 last digits 021 = beige ~RAL9001 Cap type 65 suitable for DIN 95, 97, 555, 558, 571, 601, 912, 931, 934, 963, 964, 965, 966, 979, 7963, 7972, 7976, 7982, 7983, 7991, 7995, 7997 ISO 1482, 2009, 2010, 4014, 4016, 4018, 4032, 4034, 4762, 7046, 7047, 7050, 7051, 10642 Dimension A has to match the dimension A of the snap-on rings.

Caps for snap-on rings. These caps are applicable for ring types: 60, 61, 63 and 65. Material: PA 6 Colours: last digits 500 = white last digits 599 = black last digits 002 = grey last digits 076 = brown Cap type 64 suitable for DIN 95, 97, 555, 558, 571, 601, 912, 931, 934, 963, 964, 965, 966, 979, 7963, 7972, 7976, 7982, 7983, 7991, 7995, 7997 ISO 1482, 2009, 2010, 4014, 4016, 4018, 4032, 4034, 4762, 7046, 7047, 7050, 7051, 10642 Dimension A has to match the dimension A of the snap-on rings.

Caps for snap-on rings. These caps are applicable for ring types: 60, 61, 63 and 65. Material: PA 6 Colours: last digits 500 = white last digits 599 = black last digits 002 = grey last digits 076 = brown Cap type 62 suitable for DIN 95, 97, 555, 558, 571, 601, 912, 931, 934, 963, 964, 965, 966, 979, 7963, 7972, 7976, 7982, 7983, 7991, 7995, 7997 ISO 1482, 2009, 2010, 4014, 4016, 4018, 4032, 4034, 4762, 7046, 7047, 7050, 7051, 10642 Dimension A has to match the dimension A of the snap-on rings.

Caps for snap-on rings. These caps are applicable for ring types: 60, 61, 63 and 65. Material: LDPE / PA 6 Colours: last digits 500 / 113 = white last digits 599 = black last digits 002 = grey last digits 076 = brown Cap type 61 suitable for DIN 84, 85, 95, 96, 97, 439, 963, 964, 965, 966, 6912, 7963, 7971, 7972, 7981, 7982, 7983, 7984, 7991, 7995, 7996, 7997 ISO 1207, 1481, 1482, 1580, 2009, 2010, 4035, 7046, 7047, 7049, 7050, 7051, 10642 Dimension A has to match the dimension A of the snap-on rings.

Washers for snap-on caps. These rings are applicable for cap types: 61, 62, 64 and 65. Material: PA Colours: natural Ring type 60 suitable for DIN 84, 85, 96, 439, 555, 558, 571, 601, 912, 931, 934, 979, 6912, 7971, 7976, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4014, 4016, 4018, 4032, 4034, 4035, 4762, 7049. Dimension A has to match the dimension A of the snap-on caps.

Ideal for booth construction, toolbuilding and furniture industry. Please note that diameter A should exceed the bore hole by 0.2 - 0.3 mm. Material: PE Colours: last digits 600 = white last digits 699 = black Further types on written request.

Ideal for booth construction and toolbuilding as well as for the furniture industry. Material: PE Colours: last digits 600 = white last digits 699 = black

Washers for snap-on caps. These rings are applicable for cap type: 66 Material: PA Colours: natural Ring type 69 suitable for DIN 95, 97, 963, 964, 965, 7963, 7972, 7982, 7983, 7991, 7995 ISO 1482, 2009, 2010, 7046, 7047, 7050, 7051, 10642. Dimension A has to match the dimension A of the snap-on caps.

Protection caps for facade screws (hexagon head screws) with round neoprene slice. Material: PE Colour: black Ø = washer diameter A production according to RAL colour chart or colour sample is possible - please send us your enquiry!

SOLID Sub-cutaneous Use After removal of the security clip and protection cap the syringe is ready for use. The doctor applies the implant syringe to the patient’s tissue, injects subcutaneously and presses the implant syringe completely together. During the application, the syringe shell is always in touch with the skin. First the tablet (implant) is placed in the tissue via the plunger in the needle channel and then the needle is withdrawn from the patient’s tissue. After the administration the needle is protected both by the plunger and by the needle cover, afterwards the syringe can be disposed as usual. Implant Syringe (drug device combination product) Monodose The implantation syringe is qualified for the placement of rod-shaped, long-acting tablets. These are intended to release their active substance gradually into the tissue layers of the patient. For this purpose, it is necessary that the tablet is placed subcutaneously by a needle. Generally, this is done with a...