Pressure transmitters - Import export

The industrial pressure transmitter DMP 334 has been especially designed for use in hydraulic systems up to 2200 bar. The base element of DMP 334 is a thinfilm sensor, that is welded with the pressure port and meets high demands of foolproofness and reliability. All of characteristics and the excellent mesurement data of DMP 334 as well as distinguished offset stability offer a pressure transmiter with easy handling, reliability and robustness for hydraulic user. The DMP 334 is deliverable with pressure ports of extrem pressure technics. Features: — nominal pressure: 0 ... 600 bar up to 0 ... 2.200 bar — accuracy: 0.35 % FSO — pressure sensor welded — extremly robust and excellent longterm stability Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — pressure port M20 x 1.5 oder 9/16 UNF — adjustability of span and offset — different kinds of electrical connections

The high-pressure transmitter type DMP 304 has been especially designed for applications with highest demand on precision and reliability. DMP 304 series is based on a compensated strain gauge, bonded onto a stainless steel diaphragm. Due to the rugged stainless steel housing usage under extreme conditions and in IS-required areas is no problem. Features: — nominal pressure: 0 ... 2000 bar up to 0 ... 6000 bar — accuracy: 0.5 % (opt. 0.25 %) FSO — adjustability of offset and span via front sided potentiometers — pressure port 9/16" UNF — 80 % calibration signal with MIL / Bendix plug Optional Features: — IS-version Ex ia = intrinsically safe for gases — pressure port M20 x 1.5 and M16 x 1.5 — accuracy according to IEC 60770: 0.25% FSO

The industrial pressure transmitter DMK 331 with ceramic sensor has been especially designed for pasty, polluted or aggressive media and for oxygen applications at low pressure range. As with all industrial pressure transmitters made by BD\SENSORS, you may choose between various electrical and mechanical connections also on DMK 331. Features: — nominal pressure: 0 ... 400 mbar up to 0 ... 600 bar — accuracy: 0.5 % FSO — pressure port G 1/2" flush for pasty and polluted media — pressure port G 1/2" open port PVDF for aggressive media Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — SIL 2 according to IEC 61508 / IEC 61511 — food compatible oil filling with FDA approval — cooling element for media temperatures up to 300 °C — customer specific versions

The pressure transmitter DMK 457 with ceramic sensor has been designed for typical applications in shipbuilding and offshore constructions as alternative to our pressure transmitter DMP 457 with piezoresistive stainless steel sensor. In combination with the copper-nickel-alloy the DMK 457 is suitable for seawater, e.g. level measurement in ballast tanks, etc. Features: — nominal pressure: 0 ... 400 mbar up to 0 ... 600 bar — accuracy: 0.5 % FSO — shipping approvals GL (Germanischer Lloyd), DNV (Det Norske Veritas), CCS (China Classification Society), ABS-certificate (American Bureau of Shipping), LR-certificate (Lloyd´s Register) — pressure port CuNiFe (sea water resistant) — oxygen application Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts

The pressure transmitter DMK 331P is suitable for measuring the pressure of viscous and pasty media, where a totally flush pressure port is required. As on all industrial pressure transmitters made by BD\SENSORS, you may choose between various electrical and mechanical connections also on DMK 331P. Features: — nominal pressure: 0 ... 60 bar up to 0 ... 400 bar — accuracy: 0.5 % FSO — suited for viscous and pasty media Optional Features: — IS-version Ex ia = intrinsically safe for gases and dusts — SIL 2 according to IEC 61508 / IEC 61511 — food compatible oil filling with FDA approval — cooling element for media temperatures up to 300 °C — customer specific versions

The pressure transmitter DMK 351 has been specially designed for applications in plant and machine engineering as well as laboratory techniques and is suitable for measuring small system pressure and filling heights. By using our own-developed capacitive sensor, optionally available as AI2O3 99.9%, the DMK 351 offers a high overpressure resistance and a high temperature and media resistance. The pressure transmitter is available in an intrinsically safe version for a use in explosive environments. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0.35 % (opt. 0.25 %) FSO — high media resistance Optional Features: — IS-Version (temperature class T4) Ex ia = intrinsically safe for gases and dusts — IS-version (temperature class T6) — diaphragm (99.9 % AI2O3) — customer specific versions

The pressure transmitter DMP 457 has been especially designed for rough conditions occurring especially in shipbuilding and offshore applications. All gaseous and liquid media, which are compatible with stainless steel 1.4404 (316L) respectively can be used. Sensor element is a piezoresistive stainless steel sensor with high accuracy and excellent long-term stability. In order to meet the special requirements for shipbuilding and offshore applications extensive tests had to be passed to get the LR, Germanischer Lloyd (GL), Det Norske Veritas (DNV) and China Classification Society (CCS) approvals. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 600 bar — accuracy:0.35 % (opt. 0.25 %) FSO — shipping approvals: LR, DNV, GL, ABS, BV, CCS — flush pressure port G 1/2" from 100 mbar — excellent thermal behavior Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — welded pressure port

The pressure transmitter DMP 331P was designed for use in the food and pharmaceutical industry. The compact design with hygienic process connections makes it possible to achieve an outstanding performance in terms of accuracy, temperature behavior and long term stability. The modular construction concept allows a combination of various process connections with different filling fluids and a cooling element. Several electrical connections complete the profile of DMP 331P. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy:0.35 % (opt. 0.25 %) FSO — hygenic version — diaphragm with low surface roughness — CIP / SIP cleaning up to 150 °C — vacuum resistant Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — SIL 2 according to IEC 61508 / IEC 61511 — cooling element for media temperatures up to 300 °C — diaphragm in Hastelloy® or Tantalum

The pressure transmitter DMK 458 has been developed for marine and offshore applications. In addition to thread connections, different flush versions are available, which are especially suitable for pasty, viscous, and polluted media. Due to the capacitive ceramic sensor developed by BD\SENSORS, which is optionally available in Al2O3 99.9 %, the DMK 458 shows an outstanding accuracy as well as a high overload and temperature resistance. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0.25 % (opt. 0.1 %) FSO — shipping approvals: American Bureau of Shipping (ABS), Bureau Veritas (BV), China Classification Society (CCS), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Lloyd's Register (LR) — high overpressure resistance — excellent accuracy — accuracy: 0.25 % (opt. 0.1 %) FSO Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — diaphragm AI2O3 99.9 %

The pressure transmitter DMK 351P has been designed for measuring small system pressure in the food industry and chemical industry. The DMK 351P is based on an own-developed capacitive ceramic sensor element. It features high overpressure resistance and high resistance against most of aggressive media. A variety of different process and electrical connections and an intrinsically safe version complete the range of possibilities. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0,35 % (opt. 0,25 %) FSO — hygienic version — high overpressure capability — several process connections (G1" cone, Clamp, dairy pipe, etc.) (G 1/2, dairy pipe, clamp, etc.) Optional Features: — IS-Version Ex ia = intrinsically for gases and dusts — diaphragm AI2O3 99.9 % — customer specific versions e.g. special pressure ranges

The sensor technology of the DCT 533 is the same as those of the proven pressure transmitter DMP 331 / DMP 333, whereby the DCT 533 is suitable for almost every industrial application, if medium is compatible with stainless steel 316L. The modular concept of the pressure transmitter allows customized electrical or mechanical connections, so it is easy to adapt the DCT 533 to different conditions on-site. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 400 bar — accuracy: 0,35 % (opt. 0,25%) FSO — IO-Link according to specification V 1.1 — Data transfer 38.4 kBaud — Smart sensor profile — perfect thermal behaviour — excellent long term stability Optional Features: — pressure port G 1/2" flush from 100 mbar — pressure sensor welded — customer specific versions

Contrary to the industrial pressure transmitter with analog signal, DCT 532 has a digital i²C-interface. i²C has a master-slave topology, whereby you can use up to 127 devices at one master. Due to the usage of high quality materials and components, DCT 532 is suitable for almost every industrial application, if medium is compatible with stainless steel 316L. The modular concept of the pressure transmitter allows customized electrical or mechanical connections, so it is easy to adapt the DCT 532 to different conditions on-site. Features: — nominal pressure: 0 ... 100 mbar bis 0 ... 400 bar — accuracy: 0.25% FSO — output signal: digital i²C — bus frequency max. 400 kHz — configuration of data format — interrupt signal — perfect thermal behaviour — excellent long term stability Optional Features: — pressure port G 1/2" flush from 100 mbar — pressure sensor welded — customer specific versions

DCT 531 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data will transfer in binary form. Due to the usage of high quality materials and components, DCT 531 is suitable for almost every industrial application, if medium is compatible with stainless steel 316L. The modular concept of the pressure transmitter allows customized electrical or mechanical connections, so it is easy to adapt the DCT 531 to different conditions on-site. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 400 bar — accuracy: 0.25% FSO — perfect thermal behaviour — excellent long term stability Optional Features: — pressure port G 1/2" flush from 100 mbar — pressure sensor welded — customer specific versions

The precision pressure transmitter DMP 334i is a consistent further development of the approved industrial pressure transmitter DMP 334. Basic element is a thinfilm sensor which is welded with the pressure port. The integrated digital electronics compensates actively sensor specific deviations like non-linearity and thermal error. It is therefore possible to offer a high pressure transmitter with excellent metrological qualities. Nominal pressure — from 0 ... 600 bar up to 0 ... 2200 bar — accuracy: 0.2 % FSO — welded pressure sensor — turn-down 1:10 — excellent accuracy — robust and long-term stable Optional features — communication interface for adjusting offset, span and damping — pressure port M20 x 1.5 or 9/16 UNF — different kinds of electrical connections Preferred areas of use are — Plant and mechanical engineering —Utility vehicles and mobile hydraulics

DMP 320 stands for speed and precision. With a response time of ≤ 0.5 msec and a sampling rate of 10 kHz, the pressure transmitter was designed for applications, in which an extremely fast and exact pressure measuring is required. Pressure curves, peaks and hits can be monitored and evaluated exactly. The signal processing of the sensor signal is done by newly developed digital electronics, which detect the signal with a sampling rate of 10 kHz. Sensor-specific deviations such as non-linearity, hysteresis and temperature errors are compensated actively. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 600 bar — accuracy: 0.1 % FSO — internal sample rate 10 kHz — excellent thermal behavior — excellent long term stability — extremely short response times ≤ 0.5 ms Optional Features: — customer specific versions

The pressure transmitter DMK 387 has been specially designed for applications in plant and machine engineering as well as laboratory techniques and is suitable for measuring small system pressure and filling heights. By using our own-developed capacitive sensor, available in AI2O3 99.9%, the DMK 387 offers a high overpressure resistance and a high temperature and media resistance. The pressure transmitter is available in an intrinsically safe version for usage in explosive environments. Product characteristics: — Nominal pressure from 0 ... 100 mbar up to 0 ... 60 bar — Output signal: 2-wire: 4 ... 20 mA / 3-wire and others on request — diaphragm ceramics 99.9 % Al2O3 — accuracy: 0.35 % (opt. 0.25 %) FSO Optional features — IS-version Ex ia = intrinsically safe for gases and dust — different kinds of inch threads — pressure port in PVDF or PP-HT for aggressive media

Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 6 bar — accuracy: 0.5 % FSO — stainless steel sensor without media isolation

The pressure transmitter DCT 553P is used in the food and pharmaceutical industries or in applications where a dead space-free process connection is required. A capacitive ceramic pressure sensor developed in-house is used as the basic sensor, which is characterized by a high overload and excellent surface quality. The special design prevents the formation of condensation inside the pressure transmitter and thus failure in applications with large temperature changes. The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0.35% (opt. 0.25%) FSO — IO-Link acc. to specification V1.1 — Data transfer 38.4 kBaud — Smart sensor profile — hygienic version — protection IP 67/ IP 69 — high overpressure resistance — diaphragm ceramics Al2O3 (99.9 %) Optional: — different process connections

Features: — nominal pressure: 0 ... 1 bar up to 0 ... 400 bar — accuracy: 0.5 % FSO Optional Features: — oil and grease free version

The pressure transmitter DMP 331 can be used in all industrial areas when the medium is compatible with stainless steel 1.4404 (316 L) or 1.4435 (316 L). Additional are different elastomer seals as well as a helium tested welded version available. The modulare concept of the device allows to combine different stainless steel sensors and electronic modules with a variety of electrical and mechanical versions.Thus a diversity of variations is created, meeting almost all requirements in industrial applications. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 60 bar — accuracy: 0.35 % (opt. 0.25 % / 0,1%) FSO — excellent thermal behavior — excellent accuracy — flush pressure port G 1/2" from 100 mbar Optional Features: — IS-version Ex ia = intrinsically safe for gases and dusts — SIL 2 according to IEC 61508 / IEC 61511 — pressure sensor welded — customer specific versions

Features: — ceramic sensor — nominal pressure: 0 ... 1.6 bar up to 0 ... 250 bar — accuracy: 1 % FSO

The pressure transmitter DPS 300 was developed for the differential pressure measuring for dry, non aggressive gases and compressed air and can be used for several HVAC applications. The DPS 300 is a multi range transmitter with up to three adjustable ranges. The device is equipped with a two-line LC display optionally and can simply parameterised. Values, status of the contact and the unit are shown on the display. Features: — differential pressure 0 ... 1.6 mbar up to 0 ... 1.000 mbar — accuracy: 0.5 % FSO BFSL — current and voltage output signals in 2- and 3-wire systems — adjustable ranges — adjustable damping Optional Features: — LC-display, two-line — automatic zero adjustment — contacts (only in combination with display) — square root extraction (only in combination with display)

The precision pressure transmitter DMP 331i and DMP 333i demonstrate the further development of our industrial pressure transmitters. The signal processing of sensor signal is done by digital electronics with 16-bit analog digital converter. Consequently it is possible to conduct an active compensation and the transmitters with excellent maesurements and exeptionally attractive price to offer on the market. Features: — nominal pressure: 0 ... 400 mbar up to 0 ... 600 bar — accuracy: 0.1 % FSO — thermal error in compensated range -20 … 80 °C: 0.2 % FSO TC 0.02 % FSO / 10 K — communication interface for adjusting of offset, span and damping — turn-down 1:10 Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — adjustment of nominal pressure gauges (factory-provided)

The pressure transmitter DMP 321 is the consistent further development of our in many applications approved DMP 331. It shows an improved signal behavior and sets new standards in the industrial class. Its metallic diaphragm made of stainless steel (1.4435 / 316L) offers a good corrosion resistance in many industrial processes. The modular device concept allows to combine different pressure ranges with a variety of electrical and mechanical connections.Thus a diversity of variations is created, meeting almost all requirements in industrial applications. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 600 bar — accuracy: 0.1 % / 0.25 % FSO — excellent thermal behavior — excellent accuracy — compact design Optional Features: — IS-version Ex ia = intrinsically safe for gases and dusts — pressure sensor welded — customer specific versions

The process pressure transmitter XMP ci measures the pressure of gases, steam, dust and fluids. The special-developed capacitive ceramic sensor for this transmitter has a high overpressure capability and excellent media stability. Several process connections e.g. thread or flange are available. The transmitter is as a standard equipped with HART®-communication, the customer can choose between a two chamber aluminum die cast case or a stainless field housing. Features: — nominal pressure: 0 ... 160 mbar up to 0 ... 20 bar — accuracy: 0.1 % FSO — turn-down 1:5 — two chamber aluminium die cast case or stainless field housing — internal or flush mounted capacitive ceramic sensor — HART®-communication — explosion protection: intrinsic safety (ia) — diaphragm ceramics Al2O3 (99.9 %) Optional Features: — explosion protection flameproof equipment (d) — with integrated display and operating module

Features: — differential pressure 0 ... 1 bar bis 0 ... 70 bar — display mode selectable: P+, P-, ∆P — display and pressure ports rotatable — 2 piezoresistive stainless steel sensors

The precise pressure transmitter x\act ci measures the pressure of gases, steam and fluids. The special-developed capacitive ceramic sensor for this transmitter, which can optionally be delivered in pure ceramic, has a high overpressure capability and excellent media stability. Several process connections e.g. inch thread or hygienic versions like Varivent, dairy pipe or Clamp are available. The robust stainless steel globe housing has a high ingress protection IP 67 and all characteristics for a residue-free and antibacterial cleaning. Features: — nominal pressure: 0 .. 160 mbar up to 0 .. 20 bar — accuracy: 0.1 % FSO — turn-down 1:5 — hygienic version — flush mounted, capacitive ceramic sensor — several process connections (inch thread, Clamp, ...) — with integrated display and operating module — diaphragm Al2O3 (99.9 %) Optional: — IS-Version Ex ia = intrinsically safe for gases and dusts — HART®-communication

The industrial pressure transmitter DMP 336 was especially developed for hydrogen applications and can also be used with other technical gases (e.g. oxygen). This is achieved by using an alloy based on 316L which prevents hydrogen embrittlement of the media-wetted parts. Level of hydrocarbon and particle contamination are significantly reduced by special treatment during production and cleaning. An IS- version is optionally available for explosion-protected applications zone 0 / 20. Features: — nominal pressure: 0 ... 16 up to 0 .... 1000 bar — accuracy: 0,5 % FSO — wetted parts in special stainless-steel — insensitive to pressure peaks — high overpressure capability — oil and grease free according to ISO 15001 (e.g. for oxygen applications) Optional Features — IS-version Ex ia = intrinsically safe for gases and dust

The DMD 341 is a differential pressure transmitter for non-aggressive gases and compressed air. Because of its compact and robust aluminium housing it is suited for machine and plant engineering. Basic element is a piezoresistive stainless steel silicon sensor, which features high accuracy and excellent long term stability. In combination with our display and switching unit ASM 430 the user has a 4-digit LED-display for representing the differential pressure as well as up to 2 freely configurable contacts. Features: — differential pressure 0 ... 6 mbar up to 0 ... 1000 mbar — accuracy: 0.35% / 1% / 2% FSO — piezoresistive silicon sensor — compact and robust aluminium housing — suited for non-aggressive gases and compressed air — current and voltage output signals in 2- and 3-wire systems Optional Features: — display and switching module with up to 2 contacts — customer specific versions