Pressure regulators - Import export

The pressure regulator type 8042 in reinforced version is a smart combination of a pilot pressure regulator with a sliding gate control valve and is excellently suited for gases and vapors. The pressure regulator, which operates with auxiliary pneumatic energy, is characterized by highest dynamics and control quality. External or manual set point adjustment completes the compact and simple design of the valve and regulator.

The pressure regulator type 8042 is a smart combination of a pilot pressure regulator with a sliding gate control valve and is excellently suited for gases and vapors. The pressure regulator, which operates with auxiliary pneumatic energy, is characterized by highest dynamics and control quality. External or manual set point adjustment completes the compact and simple design of the valve and regulator.

The self operated pressure regulator Type 8011 in a reinforced version with closed spring cover in the form of a pressure reducing valve (downstream pressure regulator) or an excess flow valve (upstream pressure regulator) is used in a wide range of process engineering control tasks. Media such as steam, liquids, gases, etc. can be excellently controlled without auxiliary energy.

The self operated pressure regulator type 8011 with closed spring cover in the form of a pressure reducing valve (downstream pressure regulator) or an excess flow valve (upstream pressure regulator) is used in a wide range of process engineering control tasks. Media such as steam, liquids, gases, etc. can be excellently controlled without auxiliary energy.

Inductive limit switches for the optional attachment to pneumatic diaphragm actuators. Self sufficient position detection for on/off and control valves.

High resolution (dead band ± 0.6%) • Robust aluminium housing • Multiple options for adjustment and diagnostics • Metall valve coupling • Manual override • Fail safe feature available

A motor actuator with the performance of a pneumatic actuator • Very high resolution (dead band ± 0.2%) • High positioning speed (up to 0.75 s / mm) • Actuating forces up to 5 kN and stroke dependent limit switches • Smooth start and slow down • Robust aluminum housing and metal gears • Separate terminal and easy adaptation • Multiple options for adjustment and diagnostics • Fail safe feature available • Ingress protection IP67

Compact i/p and p/p positioner for mounting on pneumatic control valves ("top mounted"). Also available in intrinsically safe version or as a pneumatic positioner (control signal 0,2 1 bar).

In contrast to other valve designs, only two diaphragm valve components come into contact with the operating media the diaphragm itself and the valve housing. The long service life, reliability, safety and resistance against aggressive and abrasive media, combined with the excellent control quality of the directly mounted digital positioner result in an ideal control valve with minimal maintenance effort and low operating costs. With its pneumatic actuator and proven Schubert & Salzer positioner, the diaphragm valve 7069 equipped with plastic housing is not only a true control valve alternative for applications in the fields of chemistry, cosmetics, environmental engineering and water treatment, it is also ideal for galvanising technology as well as for the food and beverage industry. A true all rounder.

The segment disc manual control valve type 5020 with manual actuator is a perfect choice for on/off and control applications of liquids and vapors, even if they are contaminated by particles.

The segment disc motor valve type 5030 with electric actuator is a perfect choice for on/off and control applications of liquids and vapors, even if they are contaminated by particles.

The segment disc valve type 5020 with pneumatic actuator is a perfect choice for on/off and control applications of liquids and vapors, even if they are contaminated by particles

The ball sector valve type 4040 with pneumatic actuator can be used for almost all on/off and control applications, especially with abrasive, pasty and fibrous fluids. This series is characterised by an extraordinary rangeability of 300 1 and a high flow capacity.

The ball sector motor valve type 4037 is suitable for use in potentially explosive atmospheres in accordance with Directive 94/9 EC. This motorized control valve is used in a number of process applications for shutoff and control tasks, especially with abrasive, pasty and fibrous fluids.

The ball sector valve type 4032 with high resolution motor actuator providing over 8,000 steps of resolution in 90° of travel. Developed as a basis weight control valve for paper production, this high precision control valve is also used in other industries where the highest demands are placed on control quality and positioning accuracy.

The ball sector motor valve type 4030 is used in a number of process applications for shut off and control tasks, especially with abrasive, pasty and fibrous fluids. This series is characterised by an extraordinary rangeability of 300 1 and a high flow capacity.

The adjustable sliding gate orifice type 8090 in reinforced version is suitable for precise and continuous adjustment of a defined flow. It can be adjusted and secured manually in the installed state during operation. Among other things, the orifice facilitates the hydraulic adjustment of cooling systems, e.g. when commissioning large engines in CHPs and on ships.

The sliding gate manual valve for low temperature type 8056 in reinforced version is used for cryogenic control applications down to 200°C. Media such as hydrogen, nitrogen, oxygen, carbon dioxide, etc. can be shut off safely and can be controlled excellently, even in the low temperature range.

The sliding gate manual valve type for high temperature type 8053 in reinforced version is suitable for a wide range of process applications up to 530°C. Media such as steam, liquids, gases, etc. can thus be shut off safely and controlled excellently, even in the high temperature range.

The sliding gate manual valve type 8051 in short design is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.

The sliding gate manual valve type 8050 in reinforced design and long construction is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.

The sliding gate manual valve type 8050 in long design with on/off and control operation is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.

The stainless steel probe LMP 307i is designed for continuous level measurement in water and clean or lightly polluted fluids. Basic element is a high quality stainless steel sensor with high requirements for exact measurement with good long term stability Features: — nominal pressure from 0 ... 4 mH2O up to 0 ... 200 mH2O — output signals: 2-wire: 4 ... 20 mA, 3-wire: 0 ... 10 V (others on request) — diameter 26.5 mm — small thermal effect — excellent accuracy — excellent long term stability Optional features: — IS-version Ex ia = intrinsically safe for gas and dust — drinking water certificate according to DVGW and KTW — different kinds of cables and elastomers

The DCT 533P is suitable for food / beverage and pharmaceutical industry as well as, for applications where a totally flush pressure port is required. The special design prevents condensation inside the pressure transmitter and thus a failure in applications with large temperature changes. The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. Properties can be read and qualified via IO-Link, which helps the user to assess the state of system or process. Features: — nom. pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy: 0.35% (opt. 0.25%) FSO — IO-Link acc. to specification V 1.1 — Data transfer 38.4 kBaud — Smart sensor profile — hygenic version — CIP / SIP cleaning up to 150 °C — ingress protection Ip 67 / IP 69 — diaphragm with low surface roughness Optional Features: — cooling element for media temp. up to 300 °C — different process connections

The industrial pressure transmitter DMP 335 is based on a stainless steel welded pressure sensor without fluid. This characteristic has a special advantage with applications where silicon oil or elastomeric seals cannot be used. Features: — nominal pressure: 0 ... 16 bar up to 0 ... 600 bar — accuracy: 0.5 % FSO — suitable for oxygen applications — insensitive to pressure peaks — high overpressure capability Optional Features: — IS-version Ex ia = intrinsically safe for gases and dusts — customer specific versions

The hydrostatic probe LMK 487 has been developed for measuring levels in various tankm applications for shipbuilding and offshore. In comparison to the hydrostatic probe LMK 458 the external diameter amounts to only 22 mm by which the installation in 1" pipes can be carried out easily. Beside the housing materials stainless steel and titanium, different elastomer materials are available by which an optimum adaptation to the application can be ensured. Features: — nominal pressure: 0 ... 1 mH2O up to 0 ... 100 mH2O — accuracy: 0.25 % FSO — output signal 4 ... 20mA / 2-wire — diameter 22 mm — shipping approvals: ABS, LR, DNV, GL, CCS — high long term stability — diaphragm ceramics Al2O3 (99.9 %) Optional Features — IS-version Ex ia = intrinsically safe for gases and dusts — housing material titanium — temperature element Pt 100 — different kinds of elastomer

The electronic pressure switch DS 350 is interesting for all users in plant and machine engineering, due to the integrated IO-Link interface to exchange process data, diagnostic reports and status messages with a superordinate control level, as standard. In addition, further information can be retrieved that allow conclusions to the application process. Especially in mechanical engineering, great demand for flexible operating conditions have to be satisfied. Features — Nominal pressure from 0 ... 100 mbar up to 0 ... 600 bar — accuracy: 0.5% / 0.35 % (opt. 0.25 %) FSO — IO-Link according to specification V 1.1 — smart sensor profile — data transfer 38.4 kBaud — indication of measured values on a 4-digit LED display — rotatable and configurable display module — parameter settings via IO-Link or menu (VDMA-conform) — additional information via IO-Link accessible Optional features — different mechanical connections

The pressure transmitter DMK 387 has been specially designed for applications in plant and machine engineering as well as laboratory techniques and is suitable for measuring small system pressure and filling heights. By using our own-developed capacitive sensor, available in AI2O3 99.9%, the DMK 387 offers a high overpressure resistance and a high temperature and media resistance. The pressure transmitter is available in an intrinsically safe version for usage in explosive environments. Product characteristics: — Nominal pressure from 0 ... 100 mbar up to 0 ... 60 bar — Output signal: 2-wire: 4 ... 20 mA / 3-wire and others on request — diaphragm ceramics 99.9 % Al2O3 — accuracy: 0.35 % (opt. 0.25 %) FSO Optional features — IS-version Ex ia = intrinsically safe for gases and dust — different kinds of inch threads — pressure port in PVDF or PP-HT for aggressive media

Characteristics: — nominal pressure ranges from 0 ... 1 bar up to 0 ... 10 bar also -1 ... 0 bar — accuracy: 0.5 % FSO — compact design — IO-Link according to specification V 1.1 — silicon sensor, RTV Applications: — Pneumatics — Vacuum technology