Plastic housings - Import export

The magneto-inductive MDS-35/-45 sensors are specially designed for industrial environments. The sensors are available in M12, M18 and M30 stainless steel housings or with a flat plastic housing. The pressure-resistant, stainless steel housing is ideally suited to harsh, industrial environments (dirt, oil, chemicals) and the food industry.

In contrast to other valve designs, only two diaphragm valve components come into contact with the operating media the diaphragm itself and the valve housing. The long service life, reliability, safety and resistance against aggressive and abrasive media, combined with the excellent control quality of the directly mounted digital positioner result in an ideal control valve with minimal maintenance effort and low operating costs. With its pneumatic actuator and proven Schubert & Salzer positioner, the diaphragm valve 7069 equipped with plastic housing is not only a true control valve alternative for applications in the fields of chemistry, cosmetics, environmental engineering and water treatment, it is also ideal for galvanising technology as well as for the food and beverage industry. A true all rounder.

SPIROL's BP100 Press-N-Lok™ Pin has opposing barbs on each end of the pin and is designed to permanently retain two plastic components to each other such as two halves of a plastic enclosure. Press-N-Lok™ Pins are installed in two stages: First, press the pins into one half of the plastic housing. Next, align the other half of the housing with the exposed pins and press into place. During installation, the plastic will backfill into the area around the barbs resulting in maximum resistance to axial force. SPIROL's Press-N-Lok™ Pins are manufactured from lightweight, lead free aluminium as a standard, and available to order in austenitic stainless steel. BP100 Press-N-Lok™ Pins are available in diameters ranging from 2mm to 4mm.

▪ Automated emptying system for containers up to approx. 30 liters ▪ Volumetric conveying progressive cavity pump based on the endless piston principle ▪ Pulsation-free and precise emptying and material supply to 1C and 2C dispensing systems ▪ In redundant dosing systems applicable ▪ For medium to high viscosity materials ▪ For structure sensitive, filled, abrasive materials ▪ Application for cylindrical or slightly conical metal and plastic containers ▪ Housing for machine safety and protection against dirt contamination ▪ Automatic retraction and venting the container as well as detection of media surface ▪ 4“-Touch panel with function keys for comfortable setting and parametrization of the system ▪ Externally controllable via Profinet interface ▪ Continuous determination of the position of the follower plate and level monitoring ▪ Adjustable pressure reduction for longer pauses

PA 440 field display for for the current loop with contacts Features: — field display for pressure transmitter with output signal 4 ... 20 mA / 2-wire or 0 ... 10 V / 3-wire — 4-digit LC display — pressure compensation element with PTFE-Filter Optional Features: — IS-version — 2 contacts — 4-digit LED display — plastic housing Functionality: — free scalable display — switch mode, hysteresis, parameterizable deceleration of the contacts — no external power supply necessary

Technical data UNI FUTURE with pressure transducer Pressure needs detection with switch-off upon reaching the required working pressure of 20 bis 850 bar Suitable for all tools with a oil flow to 700cm³ With built-in-pressure sensors for enhanced features and advanced settings Jogging for intermittent tool feed Power stepless adjustable, short time possible to 1,2 kW For Network and battery (24/230V) Powerful Li-Ionen battery 24 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy savin mode – Unit switches off 10 minutes after the last activity, or to low battery charge Shutdown at idle after the working cycle, prevents tool damage and saves energy Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatically adjust to 1l/min Size L/B/H: 215 x 165 x 220mm (Handle height 40mm) Weight: ca. 6,9 kg SUPPLIED WITH Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data UNI FUTURE 2050 SCU Also as a drive towards a cutting system Automatic detection with switch-off pressure required for achieving the required operating pressure of 20 bis 700 bar Suitable for all tools with a oil flow to 700cm³ With pressure gauge (1000 bar) and ground connector on the front side With pressure sensors for advanced features Detection tool with speed adjustment to (tool speed 10mm/sec) BG provision to fulfill Optional jogging for intermittent tool feed. Power adjustable,short time possible to 1,2 kW ch Network and battery (24/230V) Powerful Li-Ionen Battery 25,2 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy spaving mode– 10 minuets after the last activity or to low battery condition, switches off the unit Shutdown at idle after the working cycle, prevents tool damage and saves energy Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatic adjustment to 1l/min Size L/B/H: 222 x 168 x 229mm (Handle height 40mm) Weight: ca. 6,9 kg Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data cube with pressure transducer and lock valve Pressure needs detection with switch-off upon reaching the required working pressure of 20 bis 850 bar Suitable for all tools with a oil flow to 700cm³ With built-in-pressure sensors for enhanced features and advanced settings Jogging for intermittent tool feed Power stepless adjustable, short time possible to 1,2 kW For Network and battery (24/230V) Powerful Li-Ionen battery 24 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy savin mode – Unit switches off 10 minutes after the last activity, or to low battery charge Keeps the pressure of max. 850 bar upon actuation of the stop valve Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatically adjust to 1l/min Size L/B/H: 215 x 165 x 220mm (Handle height 40mm) Weight: ca. 6,9 kg The lock valve for pipe crimping tools prevents reduction of oil pressure in the tool. So it is possible to hold hydraulic pressure over not time limited space. Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Robust glass-fibre-reinforced plastic housing, also suitable for outdoor areas; round or square design. Individual scale design and corporate logos possible. Available in different sizes: 72x72 mm, 96x96 mm, 144x144 mm. Also available with a centred zero moving-coil element (±1 mA). Direct connection of the current, voltage measuring signals. Complies with DNV GL certification (other certifications available on request). Complies with DIN EN 50155 for railway applications.

Robust glass-fibre-reinforced plastic housing, also suitable for outdoor areas; round or square design. Individual scale design and corporate logos possible. Available in different sizes: 60 mm, 80 mm, 100 mm, 130 mm (diameter). Also available with a centred zero moving-coil element (±1 mA). Direct connection of the current, voltage measuring signals. Complies with DNV GL certification (other certifications available on request). Complies with DIN EN 50155 for railway applications.

Robust glass-fibre-reinforced plastic housing, also suitable for outdoor areas; round or square design. Individual scale design and corporate logos possible. Available in different sizes: 72x72 mm, 96x96 mm, 144x144 mm. Also available with a centred zero moving-coil element (±1 mA). Direct connection of the current, voltage measuring signals. Complies with DNV GL certification (other certifications available on request). Complies with DIN EN 50155 for railway applications.

NORIMETER – 360° analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Monitoring for valid measuring signal. Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation. Fulfils all conventional ship classifications: ABS, BV, DNV-GL, LR, MED

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Square design: 72x72mm, 96x96 mm or 144x144 mm Round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Square design: 72x72mm, 96x96 mm or 144x144 mm Round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

Mini prisms RSMP10 and RSMP12 plastic housing with spike and prisms in 12.7 and 17.5 mm With the mini prisms RSMP10 and RSMP12, surveyors can now easily take measurements in cracks, gaps and corners. Fixed dimensions (see product drawings) give the surveyor the exact path from the point of measurement to the base of the housing or the tip of the spike. In forensics the prisms are use for the exact surveying of bullet holes. NOTE: For precise measurements, the prism must be directly aligned with the surveying instrument! When using the mini prisms for surveying settlement, the spikes can be removed and thus be inserted or glued into the smallest cracks or gaps. On façades, historical buildings, supports and many other objects, monitoring is possible with measuring points that are barely identifiable for the general public. On concrete or masonry objects, small holes can be drilled to countersink the prisms flush with the surface. RSMP10 with 12.7 mm miniprism: Offset: -10.12 (min

Twistable Mini-prism RSMP180 and RSMP280 Twistable, Extensible, Plastic Housing System With 12.7 and 17.5 mm Prisms RSMP180 sticks quickly and easily even to difficult surfaces, e.g. glass and marble façades, historic buildings, steel girders, rails, gas and oil pipelines, etc. or can be attached using plugs and screws. When using tachymeters and robotic total stations the prism can always be aligned accurately with the measuring instrument the prism can be turned in a radius of 180° making it possible to use the same survey point from different directions bridges, façades and many other structures can be monitored even more quickly and precisely several prisms can be combined with each other due to the integrated connector system, making it possible to survey from different directions without having to turn the prism – see examples When using robotic total stations permanent settling measurements can be carried out during the building work settling measurements are possible on ra

RS183 Plastic housing with 30 x 30 mm reflective target can be rotated through 180° and combined with other RS183! RS183 sticks quickly and easily even to difficult surfaces, e.g. glass and marble façades, historic buildings, steel girders, rails, gas and oil pipelines, etc. or can be attached using plugs and screws.. When using tachymeters and robotic total stations the reflective target can always be aligned accurately with the measuring instrument the reflective target can be turned in a radius of 180° making it possible to use the same survey point from different directions several reflective targets can be combined with each other due to the integrated connector system, making it possible to survey from different directions without having to turn the target – see examples