Results for
IFA TECHNOLOGY GMBH
Germany
The conveyance of highly viscous products is part of our technical expertise. Feed pumps must meet the requirements for a long useful life, low maintenance and wear-free operation. We at IFA Technology live up to this claim by installing the most suitable pump in each of our systems. We use all types of pumps, from centrifugal pumps to gear pumps and piston pumps. Depending on the type of medium and its application requirements, we can design and offer you the suitable shaft seal. This includes among others packing gland seals, mechanical seals or magnetic couplings.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubricating and sealing off tap cocks, labyrinth seals, stuffing boxes and packings Lubricating and sealing off fittings made of metal, plastic and ceramic, e.g. drain, cold- and hot-water fittings Long-term lubrication of heavily loaded press and guide plates, for example on telescope booms of mobile cranes As a lubricant for of threaded spindles on radiator thermostats Advantages and benefits Reduces wear Extension of the relubrication intervals High resistance to oxidation Noise and vibration-damping Resistant to cold and hot water, water vapour, lactic, formic, acetic and fruit acid, as well as alkaline and acidic cleaning agents and disinfectants Good elastomer and plastic compatibility For optimum adhesion, clean contamination and other lubricants from slide surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply sufficient paste evenly with a brush, spatula, etc. The paste will also act as a sealant.
Request for a quoteERGOPACK DEUTSCHLAND GMBH
Germany
713E \ 726E \ 745E WITH – ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK – 24V AGM BATTERY PACK – CHARGER – ERGOPACK TOOL-LIFT – SEALING HEAD We will be happy to discuss the individual configuration of your system in person after a product demonstration at your site. 700E WITH – ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK – 24V AGM BATTERY PACK – CHARGER We will be happy to discuss the individual configuration of your system in person after a product demonstration at your site. 700 WITH – MANUALLY DRIVE VIA A HAND CRANK We will be happy to discuss the individual configuration of your system in person after a product demonstration at your site.
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
PTFE Fiber with PTFE Blocking Agent and Silicone Free Run-In Lubricant Characteristics Highest chemical resistance for a packing in rotating equipment Pliable, easily compressible packing Self lubricating, dry running capability Shaft protecting surface hardness of HRC 25 is sufficient Non ageing Operating range Pressure [p max]: 15 bar, Velocity [v max]: 10 m/s Pressure [p max]: 100 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 100 bar Temperature: t = -50… +280 °C pH: 0 - 14 Density: 1.70 g/cm³ Main application Agitators Mixer Refiner Filter Slow speed Centrifugal pumps Valves, Gate valves Metering valves Suitable for Chemical industry General industry Variant S6SI with Food certification EG 1935:2004 in accordance with EU 10/2011 FDA conformity Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special measurements. 03 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Combination Braid Made of PTFE and Para-Aramid Fiber with Run-In Lubricant Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar max. velocity centrifugal pumps: 15 m/s Characteristics Universal packing for abrasive media which need a reinforced, wear resistant and form stable packing Shaft protecting through good coefficient of fiction No contamination of media Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 500 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar max. velocity centrifugal pumps: 15 m/s Main application Centrifugal pumps Mixer Kneader Agitators Filter Extruder Refiner Suitable for Chemical industry Pulp and paper industry Form of delivery This packing can be manufactured from 6 to 40 mm square as well as in...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Application specific ring sets Improved properties are: Extrusion resistance, if high pressures have to be sealed and/or bigger gaps than the normally recommended max of 25 of the packing size are found. Wiper function, if any micro scaling is found on the stem and at reciprocating movement with control valves Blow out safety, when sealing high compressed gases and fumes Pliability, with low gland forces as well good reset and adaptability for example in applications with temperature cycles. Ring Set 3335 For Control Valves up to 400 °C. Ring Set 6655 For Control Valves and staem applications up to 600 °C steam. All rings are delivered as standard in skive cut. Ring Set 6660 For Valves up to 650 °C steam. This ringset offers minimal volumeloss. The rings in the sealing zone are split as standard in 2 halves or as option delivered with a skive cut. Top and bottom ring are delivered with skive cut. Soot Blower Ring Set For soot blower applications with steam temperature up to...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
High strength ePTFE-Graphite Characteristics Extrusion resistant even with large clearances Form stable, wear resistant, heat conductive and can be used as bull ring Shaft protecting (recommended surface hardness: HRC 25) In high pressure applications die formed rings are recommended Operating range Pressure [p max]: 30 bar, Velocity [v max]: 8 m/s Pressure [p max]: 800 bar, Velocity [v max]: 3 m/s Pressure [p max]: 500 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.35 g/cm³ Main application High pressure plunger- and dosing pumps Bullrings for mixers, highpressure valves agitators, gate valves and valves Suitable for Chemical industry Petrochemical plants High pressure machine constructions Approvals BAM for liquid and gaseous oxygen 60 °C/15 bar, 40 °C/65 bar, 200 °C/50 bar Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special measurements. 03 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
100 % PTFE Tape packing with cover braid and additional outside PTFE Tape Wrap Practical useful application data: max. temperature: +200 °C Characteristics Low coefficient of friction Good adaption to any kind of surface Non ageing or hardening Used as spiral guarantees simple assembly and disassembly in one piece Available in 2-15 mm Operating range Pressure [p max]: 20 bar, Velocity [v max]: 1 m/s Pressure [p max]: 20 bar, Velocity [v max]: 1 m/s Pressure [p max]: 100 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Valve Packing, easy to use Suitable for Chemical industry Universal use Installation and maintenance shops
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
ePTFE-Graphite Fiber with special Para-Aramid corners Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Form stable, wear resistant, heat conductive packing, can be used as bullring Highest pressure resistance, practically no gap extrusion For high pressure plunger pumps up to 1,500 bar as die formed rings Highest pressure resistance Safe and universal packing for abrasive media Precompressed rings are recommended for applications in plunger pumps Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 1500 bar, Velocity [v max]: 2 m/s Pressure [p max]: 500 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.35 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Plunger pumps Gate valves Suitable for High pressure plunger pumps and similar applications Bull rings Form of delivery This packing can be...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
2 Component Fiber sealing system impregnated with PTFE and special lubricant Pressure Capability is dependent on design of endrings. Characteristics Simple installation Use without barrier fluid Maintenance free Shaft protecting No adjusting of gland Re-pressurize in operation Operating range Velocity [v max]: 8 m/s Temperature: t = -10… +180 °C pH: 2 - 12 Density: 1.10 g/cm³ Pressure Capability is dependent on design of endrings. Main application Equipment which is badly accessible Worn shaft sleeves Non centric running shafts Pulper Suitable for Universal use Accessories HPU Endrings Form of delivery Unit for H- and P-Type: Cans 1 kg, hobbock of 25 Kg 2 Component System Component H: Is used for the basic manual fill of the stuffing box. Component P: Is used for Injection with press DVS TP 9000.
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
2 Component Fiber Sealing System impregnated with Graphite and MoS2 lubricant Pressure Capability is dependent on design of endrings. Characteristics Simple installation Use without barrier fluid Maintenance free Shaft protecting No adjusting of gland Re-pressurize in operation Operating range Velocity [v max]: 12 m/s Temperature: t = -40… +315 °C pH: 2 - 12 Density: 1.10 g/cm³ Pressure Capability is dependent on design of endrings. Main application Equipment which is badly accessible Worn shaft sleeves Non centric running shafts Suitable for Higher Temperature applications Accessories Special endrings made of HPU and PTFE/Graphite compound for non centric running shafts Form of delivery Unit for H- and P-Type: Cans 1 kg, hobbock of 25 Kg 2 Component System Component H: Is used for the basic manual fill of the stuffing box. Component P: Is used for Injection with press DVS TP 9000.
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Multilayer construction of expanded graphite with Inconel reinforcement Practical useful application data: max. temperature in oxidizing atmosphere: +450 °C Characteristics Universal suitable, rectangular preformed Sealing tape of expanded pure graphite with Inconel reinforcement Recommended gap width 0.5 mm, maximum gap width 1.0 mm Excellent adaptability on different housing forms and ovality Excellent transformation of axial compression into radial sealing force Operating range Temperature: t = -200… +650 °C pH: 0 - 14 Practical useful application data: max. temperature in oxidizing atmosphere: +450 °C Main application Fittings Valve pressure rings Suitable for Power plant Boiler houses Recommended minimum surface pressure at assembly 20 N/mm 2 Brettschneid Tape Form of delivery 5 x 12 mm in 1 kg Spool approx. 14 mtr 7.5 x 15 mm in 2.5 kg Spool approx. 18.5 mtr 10 x 15 mm in 2.5 kg Spool approx. 14 mtr 15 x 30 mm in 5 kg Spool approx. 9.5 mtr 19 x 30 mm in 5 kg Spool...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Rectangular braided tube packing Characteristics The elasticity of this gasket tape allows low uneveness of the flange surface The sealant can be reused after opening of flange Low cold flow Sealing of the cutted ends by inserted point lock Main application Metal, glass, ceramic flanges on boilers centrifuges pipe flanges tanklid housings Suitable for Flanges in General service Variant SL 4 from ePTFE Graphite Fiber SL 6 from PTFE Fiber with oil SL 19 from dry PTFE Fiber SL 44 l from expanded Graphite, integrated Inconel reinforcement and adhesive backing SL 44l Dimensions 3 x 12 mm 5 x 19 mm 6,3 x 25 mm Other dimensions and basic materials – on request.
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Pre-Loaded Packing Ring in Metal Casing Characteristics WDR-rings are ready-to-fit sealing elements for shafts and axles The wide sealing surface offers extra protection against early wear on the shaft and as well on the seal WDR rings are located in the housing with interference fit. The sealing effect is facilitated through the pre-loaded encapsulated packing. Different packing styles can be utilized depending on application Housing Standard: St 1403 galvanized Special: e.g. VA (1.4301) - CrNi Standard Insert P1P Budget to +200 °C Main application Crank and drive shafts Guiding shafts Axles, spindles and similar equipment Sealing against fluid leakage and dust penetration Protection for bearings and drive units Suitable for All Industries to seal against fluid loss or protect against dust and dirt ingress. Variant Special variantes: A 22 up to +450 °C for high temperature application S 7/G up to +250 °C for applications in abrasive environment etc. The packing insert...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Expanded natural Graphite in Purity 98 % – industrial grade or 99.85 % nuclear grade (chlorine content < 20 ppm) Temperature in steam Density min. 1.40 g/cm 3 Characteristics High cross section density Self lubrication and limited wear Dry running capability Coefficient of thermal expansion similar to steel Maintenance free and elastic, also under variable pressure Non ageing, high chemical resistance Attention! Precise tolerances and surfaces of application are requeste Operating range Pressure [p max]: 800 bar Temperature: t = -200… +550 °C pH: 0 - 14 Density: 1.80 g/cm³ Temperature in steam Density min. 1.40 g/cm 3 Main application Fittings Pumps (high temperature) Covers Valves Suitable for Valves and fittings of all Industries Approvals Oxygen BAM 200 °C/250 bar DVGW and KTW Variant Rings with integrated reinforcement or endcaps made from ANSI 316 Special quality TA Luft 300 with a leakage rate of 5.7 · 10 -3 mbar · l/(s·m) 300 °C Form of delivery ARF rings - endless,...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
PTFE Powder with Graphite, Extruded Profile Practical useful application data: max. temperature: +180 °C Characteristics Good pliability, prevents wear of shafts through embedding of abrasive materials The use of bullrings is required Operating range Pressure [p max]: 10 bar, Velocity [v max]: 12 m/s Pressure [p max]: 20 bar Temperature: t = -100… +250 °C pH: 0 - 14 Density: 1.90 g/cm³ Practical useful application data: max. temperature: +180 °C Main application Valves Gate valves Flanges Agitators Centrifugal pumps Lids Suitable for Cold and hot water Alkaline solutions Acids Oils Grease Bitumen Asphalt Crystalline and abrasive media Food industry Variant S 50 Propaflon White made out of pure PTFE
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
100% PTFE - Fiber with special PTFE Dispersion and FDA conform Siliconoil impregnated Characteristics Highest chemical resistance for a packing in rotating equipment Pliable, easily compressible packing Self lubricating, dry running capability Shaft protecting surface hardness of HRC 25 is sufficient Non ageing Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar, Velocity [v max]: 1 m/s Pressure [p max]: 500 bar Temperature: t = -100… +280 °C pH: 0 - 14 Density: 1.70 g/cm³ Main application Agitators Mixer Refiner Filter Slow speed Centrifugal pumps Valves, Gate valves Metering valves Suitable for Pulp and paper industry Chemical industry Pharmaceutical industry Food industry Approvals FDA conformity EN 1935:2004 in accordance with EN 10/2011 Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 -...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
PROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Hybrid-Braid in W-Profile made of ePTFE/Graphite and Graphite yarn with Run-In Lubricant Characteristics Universal packing for sealing abrasive mediums in all manner of plant rotating equipment Low Coefficient of friction and ultimate heat conductivity High plant standardization possibilities Recommended Shaft Surface Hardness HRC35 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 25 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -100… +280 °C pH: 0 - 14 Density: 1.55 g/cm³ Main application Centrifugal pumps Mixers Kneaders Agitators Refiners Autoclave Filters Suitable for Bauxit Industry General Mining Ash Slurrries in Power plants Pulp and paper industry Chemical industry Waste water technology Universal use Form of delivery This packing can be manufactured from 6 to 40 mm square as well as in intermediate, inch sizes and special measurements. 06 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5...
Request for a quoteResults for
Packing seals - Import exportNumber of results
19 ProductsCompany type