Results for
GLT BEARINGS GMBH
Germany
Sintered bronze plain bearings | Maintenance-free | Oil-impregnated | Self-lubricating | DIN 1850 / ISO 2795 SIB-MET® is a self-lubricating and maintenance-free plain bearing. Suitable for high speeds at low loads. Suitable for high sliding speed at low load capacity. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Wrapped composite sliding bearing with lubrication pockets/ copper-plated steel & CuSn10Pb10 & graphite | maintenance-free | DIN 1494 / ISO 3547 BIV-LUB® is a maintenance-free composite plain bearing with solid lubricant depots. Initial lubrication is necessary! High load capacity with low wear, very suitable for low sliding speeds and oscillating movements. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Wrapped composite sliding bearing with lubrication pockets/ copper-plated steel & AlSn20Cu | Low-maintenance | DIN 1494 / ISO 3547 For high sliding speeds, optimum sliding behaviour with good lubricant supply. BIV-MET®/A is a composite sliding bearing requiring maintenance; oil or grease lubrication is needed. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Wrapped bronze sliding bearing with lubrication holes/ CuSn8P (DIN 17662) | Low-maintenance | DIN 1494 / ISO 3547 BRO-MET®/L is a low-maintenance bronze plain bearing. However, initial lubrication is required—both oil and grease lubrication are possible. The hole depots reduce the relubrication intervals even more! High load capacity and strength with low wear, suitable for rough operation, corrosion resistant. High load capacity and stability at low abrasion. Because of perforations lubrication clearances are reduced to a minimum! For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Wrapped bronze sliding bearing with lubrication pockets/ CuSn8P (DIN 17662) | Low-maintenance | DIN 1494 / ISO 3547 BRO-MET® is a low-maintenance bronze plain bearing. However, initial lubrication is required—both oil and grease lubrication are possible. Due to the lubricant depots, relubrication intervals are significantly reduced! High load capacity and strength with low wear, suitable for rough operation, corrosion resistant. High load capacity and stability at low abrasion, suited for rough operation, corrosion resistant. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Wrapped composite sliding bearing steel / POM | low-maintenance | With lubrication pockets | DIN 1494 / ISO 3547 POM-MET® is a low-maintenance composite sliding bearing with a POM coating. Initial lubrication is required. Both oil or grease lubrication are possible. Due to the lubricant pockets, relubrication intervals are significantly reduced! Suitable for all sliding movements, good load capacity, robust and resistant to dirt. Suitable for grease or oil lubrication and all kinds of movement, good load capacity, robust and insensible to dirt. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Wrapped composite sliding bearing Stainless steel / PTFE coated | Maintenance-free dry sliding bearing | Corrosion resistance | Chemical resistance | DIN 1494 / ISO 3547 NOX-MET® is a versatile, corrosion-resistant dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! Excellent sliding and wear behaviour, high load capacity, shock resistant, chemically resistant against acids and bases (ph-value 0-14), corrosion resistant. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Wrapped composite sliding bearing steel / Special PTFE coated Maintenance-free dry sliding bearing | DIN 1494 / ISO 3547 TEF-MET/P is a versatile dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, it is very well suited for lubricated applications (e.g. hydraulic oil lubrication). For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Rolled composite plain bearing steel / PTFE coated | Maintenance-free dry plain bearing | DIN 1494 / ISO 3547 TEF-MET/B is a versatile, corrosion-resistant dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! Excellent sliding and wear behaviour, for all types of movement, high load capacity, good corrosion resistance, non-magnetic. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Wrapped composite plain bearing steel / PTFE coated | Maintenance-free dry plain bearing | DIN 1494 / ISO 3547 TEF-MET is a versatile dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! Excellent sliding- and wear behaviour, for all types of movement, high load capacity, all-round adaptable. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Thermoplastic all-plastic plain bearing | Maintenance-free COM-KU®/X is a self-lubricating and maintenance-free plastic plain bearing made of a high-quality plastic compound with the best sliding properties. Excellent tribological properties, especially for dry running. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Filament-wound composite bearing with self-lubricating inner | Surface backed with a high-strength | Maintenance-free | With a sliding layer of PTFE with lubricant additives COM-KU®/M is a self-lubricating and maintenance-free plastic plain bearing. Using a heavy-duty glass fibre fabric combined with a selected binder resin helps to increase the mechanical properties, pressure further and wear resistance of this bearing type. The special lubricant additives and the PTFE in the sliding layer reduce the friction coefficient, optimising the wear behaviour and thus the material's service life as a dry sliding bearing. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Fibre-reinforced compound plain bearing in wound technology | Maintenance-free | High load capacity COM-KU®/D is a self-lubricating and maintenance-free compound plain bearing. It has good sliding properties and is suitable for loads (also impact loads and with edge pressures). Good damping properties, very suitable for low sliding speeds, good chemical resistance, and long service life. Suitable as a replacement for lubricated bearings. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Wrapped spring steel plain bearing | Requires maintenance | DIN 1498 | DIN 1499 FER-MET® is a spring steel plain bearing without integrated sliding material. Lubrication of the bearing point is necessary. Very high load capacity and impact resistance for heavy-loaded applications with impact loads. Very wear-resistant. A standard gap design with a straight slot and without chamfer inside [EG], but can also be manufactured with other slot shapes if required. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Solid, turned, grinded and hardened steel plain bearing | Requires maintenance FER-MAS® is a steel plain bearing without integrated sliding material. Good lubrication is required! Suitable for highest loads, insensitive, long service life. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Solid bronze plain bearing | Maintenance-free | With solid lubricant deposits in the sliding surface | Version available with water-resistant solid lubricant LUB-MET® is a maintenance-free plain bearing. However, initial lubrication is necessary. For high loads, shock loads, wear-resistant, insensitive to dirt, corrosion-resistant, long service life. For technical details, please visit the product page on our website!v
Request for a quoteGLT BEARINGS GMBH
Germany
Machined bronze plain bearing | Requires maintenance | DIN 1850 / ISO 4379 BRO-MAS® is a plain bearing requiring maintenance, is suitable for operation in contaminated environments, has good corrosion resistance, and is insensitive to shock loads. Oil or grease lubrication is needed. Additional lubrication grooves or holes significantly reduce relubrication intervals and improve lubricant distribution. For technical details, please visit the product page on our website!
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GLT BEARINGS GMBH
Germany
Wrapped composite sliding bearing with lubrication pockets/ copper-plated steel & CuSn10Pb10 | Low-maintenance | DIN 1494 / ISO 3547 BIV-MET® is a low-maintenance bronze plain bearing. However, initial lubrication is required—both oil and grease lubrication are possible. Due to the lubricant depots, the relubrication intervals are greatly reduced! For high loads and oscillating movements as well as for rough operation and temperature load. For high load capacity and oscillating movement, as well as for rough operation and temperature load. Long-run lubrication because of lubricant storage. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Our rod ends in the best quality for you We manufacture rod ends in various designs for you. You can order these in our online shop in the desired dimensions and with individual adjustments. We will also be happy to supply you with other unique designs at short notice on request. Convince yourself of our more than 40 years of experience in plain bearing technology! Rod ends consist of a housing and a built-in spherical plain bearing. The housing of a screwable rod end has an external or internal thread. Rod ends are particularly suitable for use in linkage and lever connections. In our product range, you will find both maintenance-free and maintenance-bound rod ends. Our special hydraulic rod ends are available either for bolting on or for welding on. Our rod ends are suitable for high static loads. The maintenance-required rod ends can withstand changing loads and impact loads permanently without any problems, while maintenance-free models can only do this to a limited extent.
Request for a quoteGLT BEARINGS GMBH
Germany
Spherical plain bearings are machine elements that can be installed immediately and are produced according to a specific standard. Since they are plain bearings, there is sliding contact between the inner and outer ring. Spherical plain bearings are ideal for rotary, tilting and swivelling movements and are insensitive to shocks, impacts and vibrations. This makes them extremely popular for load-bearing and guiding functions. You will find both maintenance-free and maintenance-required spherical plain bearings in our product range. Our maintenance-free spherical plain bearings comply with DIN ISO 12240-1, dimensional series E/G. The sliding pairing consists of a hard chrome/PTFE composite. The bearings themselves are manufactured with the tolerance group CN. These are also available in sealed versions. If you require additional dimensions or unique designs, please let us know in an enquiry form, and we will supply you with the desired product.
Request for a quoteGLT BEARINGS GMBH
Germany
Rolled composite plain bearing | Maintenance-free | Steel / graphite bronze | With embedded solid lubricants GAP-MET®/S is a maintenance-free composite plain bearing. However, oil or grease lubrication is possible. High load capacity and strength, for all slow movement types, suitable for contaminated environments, no moisture absorption, good chemical resistance. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Solid sintered bronze bearing | Maintenance-free | With uniformly embedded solid lubricant in the bronze or iron matrix GAP-MET®/M is a maintenance-free plain bearing. However, oil or grease lubrication is possible. High load capacity and strength for all slow movement types, suitable for contaminated environments, no moisture absorption, good chemical resistance and good temperature resistance. The parts are mechanically reworkable. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
COM-KU®/S is a self-lubricating and maintenance-free plastic plain bearing. However, additional lubrication is possible. It is well suited for simple applications and axial movements
Request for a quoteGLT BEARINGS GMBH
Germany
Wrapped composite sliding bearing with lubrication pockets/ CuSn8P & graphite | maintenance-free | DIN 1494 / ISO 3547 BRO-LUB is a maintenance-free bronze plain bearing with solid lubricant depots. Initial lubrication is necessary! High load capacity with low wear, very suitable for low sliding speeds and oscillating movements. For technical details, please visit the product page on our website!
Request for a quoteResults for
Needle roller bearings - Import exportNumber of results
25 ProductsCompany type